High-cycle fatigue strength of ultrafine-grained 5483 Al-Mg alloy at low and elevated temperature in comparison to conventional coarse-grained Al alloys
Source abstract
Abstract
Abstract This paper presents fatigue behavior of ultrafine-grained (UFG) 5483 Al-Mg alloy processed by hydroextrusion in comparison to its coarse-grained counterpart (CG 5483) and precipitation strengthened CG 7475 alloy. The specimens were tested at low (−50 °C), ambient (25 °C) and elevated (100 °C) temperature in tension–tension (R = 0.1) fatigue under stress control. It was found that the decrease of temperatures leads to a shift of Wohler curves to higher stress values. Despite of similar YS, UFG 5483 alloy exhibited reduced fatigue strength compared with CG 7475 alloy. The changes in fatigue life were rationalized in terms of lower stability of UFG structure under cyclic loading. UFG 5483 and CG 7475 alloys were susceptible to cyclic softening attributed to fatigue-induced recovery process, whereas CG 5483 exhibited cyclic hardening accompanied by dislocation density increase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Fatigue behaviour in nanostructured metals
2. Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation10.1016/j.scriptamat.2004.05.012 ↗
3. May · 2008
4. Mechanical properties, dislocation density and grain structure of ultrafine-grained aluminum and aluminum-magnesium alloys10.1007/s11661-007-9110-0 ↗
5. Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing10.1016/S0921-5093(00)01682-8 ↗
6. Failure of metals III: fracture and fatigue of nanostructured metallic materials10.1016/j.actamat.2015.07.049 ↗
7. Cyclic stress-strain response and dislocation structures in polycrystalline aluminum10.1016/S0921-5093(03)00347-2 ↗
8. On the grain-size dependence of metal fatigue: outlook on the fatigue of ultrafine-grained materials
9. Klemm · 2004
10. S-N property and fatigue damage of ultrafine grained Cu smooth specimens10.1016/j.mspro.2014.06.087 ↗
11. Microstructural study of the parameters governing coarsening and cyclic softening in fatigued ultrafine-grained copper10.1080/01418610208235689 ↗
12. Fatigue-induced grain coarsening and crack growth behavior in ultrafine-grained copper under different loading histories10.1016/j.ijfatigue.2013.02.008 ↗
13. High-cycle fatigue strength and small-crack growth behavior of ultrafine-grained copper with post-ECAP annealing10.1016/j.engfracmech.2013.07.018 ↗
14. Cyclic deformation response of ultrafine pure Al10.1016/j.actamat.2011.05.013 ↗
15. The role of shear banding on the fatigue ductility of ultrafine-grained aluminium10.1016/j.scriptamat.2012.10.038 ↗
16. Initiation of fatigue cracks in ultrafine-grained materials in high-cycle fatigue region10.1016/j.proeng.2014.06.213 ↗
17. Strain localization and fatigue crack initiation in ultrafine-grained copper in high- and giga-cycle region10.1016/j.ijfatigue.2013.04.027 ↗
18. Low-cycle fatigue of ultrafine-grained aluminum at low temperatures10.2320/matertrans.L-MZ201103 ↗
19. On the cyclic deformation response of ultrafine-grained Al-Mg alloys at elevated temperatures10.1016/j.msea.2008.04.071 ↗
20. Fatigue properties of nanocrystalline titanium
21. Study of fatigue behaviour of 7475 aluminium alloy10.1007/BF02710107 ↗
22. Structure and properties of nanomaterials produced by severe plastic deformation
23. Recent development in grain refinement by hydrostatic extrusion10.1007/s10853-008-2810-z ↗
24. Precipitation strengthening of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion10.1016/j.msea.2014.04.092 ↗
25. Effect of severe plastic deformation realized by hydrostatic extrusion and rotary swaging on the properties of CP Ti grade 210.1016/j.jmatprotec.2015.02.027 ↗
26. Image based analysis of complex microstructures of engineering materials10.2478/v10006-008-0003-1 ↗
27. Stereology of nano-materials10.5566/ias.v29.p1-12 ↗
28. Hirsch · 1977
29. Measuring the thickness of aluminium alloy thin foils using electron energy loss spectroscopy10.1016/S1044-5803(99)00072-8 ↗
30. A method for thin foil thickness determination by transmission electron microscopy10.1016/j.apsusc.2007.07.057 ↗
31. The effect of dislocation contrast on x-ray line broadening: a new approach to line profile analysis10.1063/1.117951 ↗
32. X-ray and neutron diffraction measurements of dislocation density and subgrain size in a friction-stir-welded aluminum alloy10.1007/s11661-009-9963-5 ↗
33. Third-order elastic constants of aluminum10.1103/PhysRev.175.955 ↗
34. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
35. Measurement of screw and edge dislocation density by means of X-ray Bragg profile analysis10.1016/S0921-5093(01)00979-0 ↗
36. Influence of severe plastic deformation on the PLC effect and mechanical properties in Al 5XXX alloy10.4028/www.scientific.net/SSP.114.171 ↗
37. The influence of severe plastic deformation processes on electrical conductivity of commercially pure aluminium and 5483 aluminium alloy10.1016/j.acme.2016.04.013 ↗
38. Precipitation phenomena in an ultrafine-grained Al alloy10.1016/j.actamat.2012.12.037 ↗
39. GP-zones in Al-Zn-Mg alloys and their role in artificial aging10.1016/S1359-6454(01)00251-8 ↗
40. A model for the electrical conductivity of peak-aged and overaged Al-Zn-Mg-Cu alloys10.1007/s11661-003-0221-y ↗
41. Fatigue behaviour of light alloys with ultrafine grain structure produced by severe plastic deformation: an overview10.1016/j.ijfatigue.2009.06.022 ↗
42. Role of Mg in simultaneously improving the strength and ductility of Al – Mg alloys10.1016/j.msea.2016.01.089 ↗
43. The dislocation cell size and dislocation density in copper deformed at temperatures between 25 and 700°C10.1016/0001-6160(72)90012-0 ↗
44. Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed10.1016/j.actamat.2009.05.017 ↗
45. Microstructure and flow stress of polycrystals and single crystals10.1016/S1359-6454(97)00365-0 ↗
46. Improvement of high-cycle fatigue life in a 6061 Al alloy produced by equal channel angular pressing10.1016/S0921-5093(02)00010-2 ↗
47. Fatigue properties of 5056 Al-Mg alloy produced by equal-channel angular pressing10.1016/S0965-9773(99)00392-X ↗
48. Transition of tensile deformation behaviors in ultrafine-grained aluminum10.1016/j.actamat.2005.05.005 ↗
49. Temperature sensitivity and prediction of the mechanical behaviors of ultrafine grained aluminum under uniaxial compression10.1016/S0894-9166(14)60045-8 ↗
50. Tensile properties of UFG aluminium alloy AA6016 at low temperatures10.1088/1742-6596/240/1/012027 ↗
51. Influence of fine-grained structure and superplastic deformation on the strength of aluminium alloys10.1007/BF00355893 ↗
52. Direct measurement of the rate of extrusion growth in fatigued copper mono- and polycrystals
53. AFM and SEM-FEG study on fundamental mechanisms leading to fatigue crack initiation10.1016/j.ijfatigue.2014.09.019 ↗
54. Mechanisms governing cyclic deformation and failure during elevated temperature fatigue of aluminum alloy 705510.1016/S0142-1123(99)00012-2 ↗
55. Cyclic behaviour of model Al - Li alloys: effect of the precipitate state10.1016/S1044-5803(00)00074-7 ↗
56. Transition behaviour of deformation mode from shearing to looping in Al-Li single crystals10.1080/01418619408242554 ↗