Notch fatigue analysis and crack initiation life estimation of maraging steel fabricated by laser beam powder bed fusion under multiaxial loading
Source abstract
Abstract
Abstract This paper deals with the notch fatigue behaviour and crack initiation life estimation in maraging steel fabricated by laser beam powder bed fusion under multiaxial loading. Tests are conducted in tubular geometries with lateral holes considering different normal stress to shear stress ratios and multiaxial loading levels. The cyclic stress–strain response at the notch-controlled process zone is simulated numerically using two alternative approaches: a generalised isotropic plasticity model with mixed isotropic-kinematic hardening, and a linear-elastic model. Both approaches demonstrated to be suitable for predicting the crack initiation sites, the directions of crack growth, and the fatigue life. Fatigue life was calculated from a SWT-based model combined with the Theory of Critical Distances. Elastic-plastic predictions led to smaller errors but slightly shifted to the non-conservative side.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Socie D, Marquis G. Multiaxial fatigue. SAE International; 1999. ISBN 978-0768004533.10.4271/R-234 ↗
2. Carpinteri A, Spagnoli A, Vantadori S, Viappiani D. A multiaxial criterion for notch high-cycle fatigue using a critical-point method. Eng Fract Mech 2008;75:1864–74. DOI: 10.1016/j.engfracmech.2006.11.002.10.1016/j.engfracmech.2006.11.002 ↗
3. Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications10.1016/j.ijfatigue.2020.105479 ↗
4. Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
5. Microstructure and mechanical properties of selective laser melted 18Ni-300 steel10.1016/j.phpro.2011.03.033 ↗
6. Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition10.1016/j.actamat.2017.02.069 ↗
7. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel10.1016/j.matdes.2017.08.026 ↗
8. Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting10.1557/jmr.2014.204 ↗
9. A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.018 ↗
10. Steels in additive manufacturing: A review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
11. A review of factors affecting the mechanical properties of maraging steel 300 fabricated via laser powder bed fusion10.3390/met10091273 ↗
12. Multiaxial fatigue behaviour of maraging steel produced by selective laser melting10.1016/j.matdes.2021.109469 ↗
13. Computational framework for multiaxial fatigue life prediction of compressor discs considering notch effects10.1016/j.engfracmech.2018.08.009 ↗
14. A comparison of methods for calculating notch tip strains and stresses under multiaxial loading
15. Recent advances on notch effects in metal fatigue: A review10.1111/ffe.13195 ↗
16. Cyclic plasticity of the as-built EOS maraging steel: preliminary experimental and computational results10.3390/app10041232 ↗
17. Fatigue crack growth in maraging steel obtained by selective laser melting10.3390/app9204412 ↗
18. Multiaxial fatigue assessment using a simplified critical plane-based criterion10.1016/j.ijfatigue.2011.01.004 ↗
19. Multiaxial fatigue: a stress based criterion for hard metals10.1016/j.ijfatigue.2004.05.006 ↗
20. Rapid assessment of multiaxial fatigue lifetime in notched components using an averaged strain energy density approach10.1016/j.ijfatigue.2019.02.005 ↗
21. McDiarmid DI. A shear stress based critical-plane criterion of multiaxial fatigue failure for design and life prediction. Fatigue Fract Eng Mater Struct, 1194;17:1475-1484 DOI: 10.1111/j.1460-2695.1994.tb00789.x.10.1111/j.1460-2695.1994.tb00789.x ↗
22. Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting10.3390/met8010032 ↗
23. New methodology of fatigue life evaluation for multiaxially loaded notched components based on two uniaxial strain-controlled tests10.1016/j.ijfatigue.2018.02.027 ↗
24. Three-dimensional numerical simulation of the deep drawing process using solid finite elements10.1016/S0924-0136(99)00345-3 ↗
25. Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process10.1007/s11831-008-9018-x ↗
26. Fatigue crack growth behavior of fine-grained steel S460N under proportional and non-proportional loading10.1016/j.engfracmech.2010.02.008 ↗
27. Prediction of fatigue damage region with the use of the notch critical plane approach for crack initiation and propagation10.1016/j.ijfatigue.2020.105533 ↗
28. Crack initiation and growth path under multiaxial fatigue loading in structural steels10.1016/j.ijfatigue.2009.01.013 ↗
29. Experimental and numerical investigation of mixed mode I+II and I+III fatigue crack growth in S355J0 steel10.1016/j.ijfatigue.2018.04.005 ↗
30. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
31. Generalized probabilistic model allowing for various fatigue damage variables10.1016/j.ijfatigue.2017.03.031 ↗
32. On the behaviour of 316 and 304 stainless steel under multiaxial fatigue loading: application of the critical plane approach10.3390/met9090978 ↗
33. Further investigation of Neuber's rule and the equivalent strain energy density (ESED) method10.1016/j.ijfatigue.2003.10.002 ↗