Estimation of stress in specimens loaded with ultrasonic fatigue machines
Source abstract
Abstract
Abstract Piezo-electric ultrasonic fatigue machines are used to carry out fatigue tests more rapidly than what is possible using other technologies, at a frequency of 20 kHz . The very high cycle fatigue (VHCF) domain can be studied with these machines as 10 9 cycles are reached within 14 h when specimens are loaded at stress amplitudes below the yield stress or conventional fatigue strength. The estimation of stress in specimens fatigued at high frequency is a current challenge when adopting this technology. This paper discusses the accuracy and reliability of three methods used to estimate stress amplitudes in specimens subjected to VHCF tests at a high loading frequency. Two historically used methods using strain gauges and a laser vibrometer are discussed and compared with a third, recently developed method based on time-resolved in situ X-ray diffraction (XRD). The three methods are applied to estimate the stress amplitude in a pearlitic steel specimen. The experimental artifacts and uncertainties are evaluated quantitatively to compare the benefits and limits of the methods. The experimental results show that the three methods correctly estimate the stress amplitudes applied to fatigued specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Fatigue and fracture mechanics · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Very high cycle fatigue properties of bainitic high carbon–chromium steel10.1016/j.ijfatigue.2008.09.001 ↗
2. S. Stanzl-Tschegg, Ultrasonic fatigue, in: K.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, P. Veyssière (Eds.), Encyclopedia of Materials: Science and Technology, Elsevier, Oxford, 2001, pp. 9444–9449. URL: http://www.sciencedirect.com/science/article/pii/B0080431526017071. doi: 10.1016/B0-08-043152-6/01707-1.10.1016/B0-08-043152-6/01707-1 ↗
3. Investigating Fatigue Frequency Effects on Single Phase Ductile Materials10.1016/j.proeng.2015.12.675 ↗
4. Mason · 1958
5. C. Fischer, R. Wagener, A. Friedmann, C. Axt, T. Melz, Piezoelectric driven testing facilities to research the very high cycle fatigue regime, Berger C, Christ H-J, editors, 2011, pp. 427–432.
6. M. Schmidt, M.T. Friedman A, Drögemüller T, Hybride prüftechnik zur dynamischen charakterisierung von elastomerbauteilen, volume Werkstoffprüfung, Konstruktion, Werkstoffentwicklung und Schadensanalyse, 2010, pp. 161–166.
7. An understanding of very high cycle fatigue of metals10.1016/S0142-1123(03)00147-6 ↗
8. An Automatic Ultrasonic Fatigue Testing System for Studying Low Crack Growth at Room and High Temperatures
9. Piezoelectric fatigue testing machines and devices10.1016/j.ijfatigue.2005.09.020 ↗
10. Very high cycle fatigue measuring techniques10.1016/j.ijfatigue.2012.11.016 ↗
11. Effects of intermittent loading on fatigue life of a high strength steel in very high cycle fatigue regime10.1016/j.ijfatigue.2018.07.033 ↗
12. Gigacycle fatigue properties for high-strength low-alloy steel at 100 Hz, 600 Hz, and 20 kHz10.1016/S1359-6462(01)01213-1 ↗
13. Crossland · Effect of a large hydrostatic pressure on the torsional fatigue strength of an alloy steel · 1956 · 138
14. On a new multiaxial fatigue limit criterion: theory and application, biaxial and multiaxial fatigue
15. Design and modeling of the power ultrasonic transducers, MP Interconsulting
16. In situ synchrotron ultrasonic fatigue testing device for 3d characterisation of internal crack initiation and growth10.1111/ffe.13140 ↗
17. A new ultrasonic fatigue testing device for biaxial bending in the gigacycle regime10.1016/j.ijfatigue.2016.12.039 ↗
18. Microsecond time-resolved x-ray diffraction for the investigation of fatigue behavior during ultrasonic fatigue loading10.1107/S1600577519008518 ↗
19. High Speed In Situ Synchrotron Observation of Cyclic Deformation and Phase Transformation of Superelastic Nitinol at Ultrasonic Frequency10.1007/s11340-019-00562-8 ↗
20. In situ synchrotron X-ray imaging of high-cycle fatigue crack propagation in single-crystal nickel-base alloys10.1016/j.actamat.2011.04.042 ↗
21. Ultrasonic fatigue tests at high temperature on an austenitic steel10.1016/j.jppr.2012.10.008 ↗
22. Ultrasonic fatigue testing equipment and new procedures for complex material evaluation10.1016/0041-624X(93)90034-W ↗
23. Fatigue crack growth and threshold measurements at very high frequencies10.1179/imr.1999.44.1.1 ↗
24. A Brief Review of the Application and Problems in Ultrasonic Fatigue Testing10.1016/j.aasri.2012.09.024 ↗
25. Device for carrying out environmental very high cycle fatigue tests with ultrasonic excitation in asymmetric push–pull mode10.1016/j.ijfatigue.2013.02.010 ↗
26. H. Yahiaoui, Effet de l’espacement interlamellaire sur le comportement sous chargements monotone et cyclique de l’acier perlitique C70., Ph.D. thesis, ENSAM Paris, 2013. URL: http://www.theses.fr/2013ENAM0025.
27. Dissipation Assessments During Dynamic Very High Cycle Fatigue Tests10.1007/s11340-014-9857-3 ↗
28. Elastic anisotropy and yield surface estimates of polycrystals10.1016/j.ijsolstr.2009.04.001 ↗
29. R. Lebensohn, P. Castañeda, R. Brenner, O. Castelnau, Computational Methods for Microstructure-Property Relationships, ghosh, somnath and dimiduk, dennis ed., Springer, 2011, pp. 393–441.10.1007/978-1-4419-0643-4_11 ↗
30. Multiscale modeling of the elastic behavior of architectured and nanostructured cu-nb composite wires10.1016/j.ijsolstr.2017.05.022 ↗
31. The elasticity of an isotropic aggregate of anisotropic cubic crystals10.1115/1.4010899 ↗
32. Self-consistent scheme and graded disorder in polycrystal elasticity10.1088/0305-4608/8/11/011 ↗
33. In situ diffraction strain analysis of elastically deformed polycrystalline thin films, and micromechanical interpretation10.1107/S0021889809037376 ↗
34. Implementation of the self-consistent kröner–eshelby model for the calculation of x-ray elastic constants for any crystal symmetry10.1017/S088571561900037X ↗
35. Synchrotron x-ray diffraction experiments with a prototype hybrid-pixel detector10.1107/S0021889811049107 ↗
36. Study of the antiplane deformation of linear 2-d polycrystals with different microstructures10.1016/j.ijsolstr.2005.02.051 ↗
37. Direct measurement of local constitutive relations, at the micrometre scale, in bulk metallic alloys10.1107/S1600576717006185 ↗
38. R. Raj Purohit Purushottam, T. Richeton, S. Berbenni, L. Germain, N. Gey, T. Connolley, O. Castelnau, Estimating single-crystal elastic constants of polycrystalline βmetastable titanium alloy: A bayesian inference analysis based on high energy x-ray diffraction and micromechanical modeling, Acta Mater. (submitted).
39. Lattice strains and diffraction elastic constants of cubic polycrystals10.1016/j.jmps.2020.103899 ↗