Effects of temperature gradients on thermomechanical fatigue of nickel-based superalloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Thermo-mechanical fatigue – in the gas turbine engine
2. Thermal–mechanical fatigue (including thermal shock)
3. A review of thermo-mechanical fatigue behaviour in polycrystalline nickel superalloys for turbine disc applications10.3184/096034013X13630238172260 ↗
4. Thermomechanical fatigue experiment and failure analysis on a nickel-based superalloy turbine blade10.1016/j.engfailanal.2019.04.023 ↗
5. The influence of phase angle, strain range and peak cycle temperature on the TMF crack initiation behaviour and damage mechanisms of the nickel-based superalloy, RR100010.1016/j.ijfatigue.2017.01.036 ↗
6. Aero-engine turbine blade life assessment using the neu/sehitoglu damage model10.1016/j.ijfatigue.2013.11.015 ↗
7. Thermal gradient mechanical fatigue assessment of a nickel-based superalloy10.1016/j.ijfatigue.2020.105486 ↗
8. Development and analysis of thermal barrier coatings on gas turbine blades – A review
9. Synchrotron XRD measurements of thermal barrier coatings subjected to loads representing operational conditions of rotating gas turbine blades
10. Defect evolution in thermal barrier coating systems under multi-axial thermomechanical loading10.1016/j.surfcoat.2005.07.098 ↗
11. Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testing10.1016/j.ijfatigue.2007.01.037 ↗
12. Advanced thermal gradient mechanical fatigue testing of CMSX-4 with an oxidation protection coating10.1016/j.ijfatigue.2007.01.034 ↗
13. Novel test facility for investigation of the impact of thermally induced stress gradients on fatigue life of cooled gas turbine components10.1115/1.4041129 ↗
14. Investigation of thermal gradient mechanical fatigue test methods for nickel-based superalloys10.1007/s11340-020-00680-8 ↗
15. Mechanical fatigue testing under thermal gradient and manufacturing variabilities in nickel-based superalloy parts with air-cooling holes10.1007/s11340-022-00868-0 ↗
16. Damage mechanisms in an EB-PVD thermal barrier coating system during TMF and TGMF testing conditions under combustion environment10.1016/j.ijfatigue.2016.08.001 ↗
17. New equations for heat and mass transfer in turbulent pipe and channel flow
18. Bergman · 2011
19. Creep behavior of single crystal superalloy specimen under temperature gradient condition10.1016/j.msea.2008.04.105 ↗
20. Analysis of temperature gradients in thin-walled structures under thermomechanical fatigue loading conditions10.1016/j.ijfatigue.2022.107254 ↗
21. Specific failures of superalloys with thermal barrier coatings subjected to thermo-mechanical fatigue loadings with a thermal gradient in a simulated combustion environment
22. Analysis of thick-walled elastic-plastic sphere subjected to temperature gradient10.1080/01495739.2013.818893 ↗
23. Temperature gradients in TMF specimens. Measurement and influence on TMF life10.1016/j.ijfatigue.2007.01.039 ↗
24. Complex thermo-mechanical approaches to study the behavior of high-temperature alloys
25. Assessment of thermo-mechanical fatigue in a nickel-based single-crystal superalloy CMSX-4 accounting for temperature gradient effects10.1016/j.msea.2021.140918 ↗
26. Hazime R, Seifert T, Chang C-C, Kassir A, Sethy A. A Mechanism-Based Thermomechanical Fatigue Life Assessment Method for High Temperature Engine Components with Gradient Effect Approximation. In: WCX sAE world congress experience. 2019, p. 2019–01–0536.10.4271/2019-01-0536 ↗
27. Socie · 2000
28. The effect of combined low-cycle fatigue and creep on the life of austenitic stainless steels10.1007/BF02913411 ↗
29. A lifetime model for creep-fatigue interaction with applications to the creep resistant steel P9210.1016/j.ijfatigue.2021.106308 ↗
30. Creep–fatigue interaction in two gas turbine Ni based superalloys subjected to service-like conditions10.1179/0960340914Z.00000000052 ↗
31. Wu · 2019
32. A continuum damage model for multi-axial low cycle fatigue of porous sintered metals based on the critical plane concept10.1016/j.mechmat.2016.09.013 ↗
33. Damage-based low-cycle fatigue lifetime prediction of nickel-based single-crystal superalloy considering anisotropy and dwell types10.1111/ffe.13345 ↗
34. Use of the damage concept in describing creep-fatigue interaction under prescribed stress10.1016/0020-7403(76)90053-9 ↗
35. Continuum damage mechanics: Part II—Damage growth, crack initiation, and crack growth10.1115/1.3173662 ↗
36. In-phase thermomechanical fatigue lifetime prediction of nickel-based single crystal superalloys from smooth specimens to notched specimens based on coupling damage on critical plane10.1016/j.ijfatigue.2019.05.016 ↗
37. Constitutive modelling of ratcheting behaviour for nickel-based single crystal superalloy under thermomechanical fatigue loading considering microstructure evolution10.1016/j.ijfatigue.2020.105786 ↗
38. Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 71810.1016/j.ijfatigue.2018.11.018 ↗
39. Solution of an inverse problem of heat conduction by iteration methods10.1007/BF00827525 ↗
40. A sequential conjugate gradient method to estimate heat flux for nonlinear inverse heat conduction problem10.1016/j.anucene.2020.107798 ↗
41. A modified sequential gradient-based method for the inverse estimation of transient heat transfer coefficients in non-linear one-dimensional heat conduction problems10.1016/j.icheatmasstransfer.2021.105488 ↗
42. Estimate of temperature gradients of thin-walled structures under thermomechanical fatigue loading10.2514/1.J061824 ↗
43. Cyclic plasticity modeling of nickel-based superalloy Inconel 718 under multi-axial thermo-mechanical fatigue loading conditions10.1016/j.ijfatigue.2018.09.017 ↗
44. Time-independent constitutive theories for cyclic plasticity10.1016/0749-6419(86)90010-0 ↗
45. Modeling cyclic deformation of Inconel 718 superalloy by means of crystal plasticity and computational homogenization10.1016/j.ijsolstr.2017.06.014 ↗
46. Modeling of the constitutive behavior of Inconel 718 at intermediate temperatures10.1115/1.4002913 ↗
47. Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging10.1016/j.ijplas.2012.09.011 ↗
48. Unified constitutive modeling of haynes 230 including cyclic hardening/softening and dynamic strain aging under isothermal low-cycle fatigue and fatigue-creep loads10.1016/j.ijplas.2020.102922 ↗
49. Effects of creep and oxidation to thermomechanical fatigue life assessment for nickel-based superalloy10.1016/j.ijfatigue.2023.107873 ↗
50. Isothermal and thermomechanical fatigue behavior of Inconel 718 superalloy10.1016/j.msea.2018.11.052 ↗
51. Life assessment of anisotropic low cycle fatigue of nickel-base single crystal superalloy10.1016/j.ijfatigue.2022.107310 ↗
52. Creep crack initiation and growth in Inconel 718 alloy at 650 °C10.1111/j.1460-2695.1987.tb01156.x ↗
53. Aging effects on the microstructure and creep behavior of Inconel 718 superalloy10.1016/j.msea.2008.04.097 ↗
54. Creep behavior of the Inconel 718 superalloy10.4028/www.scientific.net/DDF.326-328.509 ↗
55. Evolution of microstructural characteristics during creep behavior of Inconel 718 alloy10.1016/j.msea.2022.143859 ↗
56. Dependence of creep fracture of Inconel 718 on grain boundary precipitates10.1016/S1359-6454(96)00399-0 ↗
57. Anisotropic thermomechanical fatigue of a nickel-base single-crystal superalloy Part II: Damage modeling and life assessment
58. The role of oxygen-grain-boundary diffusion during intercrystalline oxidation and intergranular fatigue crack propagation in alloy 718
59. Competing mechanism of creep damage and stress relaxation in creep-fatigue crack propagation in Ni-base superalloys
60. Investigation of damage mechanisms in thermomechanical fatigue of nickel-based single-crystal alloys10.1016/j.engfracmech.2024.109871 ↗
61. Damage evolution and modeling of sintered metals under multi-axial loading conditions10.1016/j.commatsci.2013.05.040 ↗
62. Penny · 1995
63. Cyclic hardening/softening behavior of 316L stainless steel at elevated temperature including strain-rate and strain-range dependence: Experimental and damage-coupled constitutive modeling10.1016/j.ijplas.2018.11.001 ↗
64. Rate dependent ductility and damage threshold: Application to nickel-based single crystal CMSX-410.1016/j.ijplas.2018.09.006 ↗
65. A study of cyclic behaviour of a nickel-based superalloy at elevated temperature using a viscoplastic-damage model10.1016/j.ijfatigue.2010.08.016 ↗
66. Prediction of plane-strain creep-crack growth using continuum damage mechanics10.1177/105678959600500402 ↗
67. Modeling the temperature dependence of tertiary creep damage of a Ni-based alloy10.1115/1.3148086 ↗
68. A continuum damage mechanics-based unified creep and plasticity model for solder materials10.1016/j.actamat.2014.09.051 ↗
69. The experimental and numerical studies on multiaxial creep behavior of inconel 783 at 700 °C10.1016/j.ijpvp.2019.05.005 ↗
70. Yu · 2010
71. Yu · 2014
72. Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650 °C10.1016/j.ijplas.2023.103601 ↗
73. Influence of minimum temperature on the thermomechanical fatigue of a directionally-solidified Ni-base superalloy10.1016/j.proeng.2010.03.074 ↗
74. A new energy-based isothermal and thermo-mechanical fatigue lifetime prediction model for aluminium-silicon-magnesium alloy: A new energy-based model10.1111/ffe.12078 ↗
75. A method based on virtual strain-energy parameters for multiaxial fatigue life prediction
76. Cumulative damage in fatigue10.1115/1.4009458 ↗
77. Multiaxial thermo-mechanical fatigue life prediction based on notch local stress-strain estimation considering temperature change10.1016/j.engfracmech.2022.108384 ↗
78. Prediction of creep rupture life of a V-Notched bar in DD6 Ni-based single crystal superalloy10.1016/j.msea.2014.07.006 ↗
79. Effect of serrated grain boundaries on the creep property of inconel 718 superalloy10.1016/j.msea.2011.10.014 ↗
80. Creep behaviors and mechanisms of Inconel718 and Allvac718plus10.1016/j.msea.2017.06.032 ↗
81. Stress gradient effect in metal fatigue: Review and solutions10.1016/j.tafmec.2022.103513 ↗
82. The fatigue limit prediction of notched components – A critical review and modified stress gradient based approach10.1016/j.ijfatigue.2020.105531 ↗
83. Stress gradient as a size effect in fatigue life determination for alternating bending10.1016/j.ijfatigue.2021.106461 ↗
84. Influence of strain gradient on fatigue life of carbon steel for pressure vessels in low-cycle and high-cycle fatigue regimes10.3390/ma15020445 ↗
85. High cycle fatigue in a single crystal superalloy: Time dependence at elevated temperature