Influence of Ru on the thermomechanical fatigue deformation behavior of a single crystal superalloy
Source abstract
Abstract
Abstract The deformation mechanisms of a single crystal nickel-base superalloy with and without Ru-doped have been investigated under out-of-phase thermomechanical fatigue. The Ru-doped alloy exhibits a thermomechanical fatigue life more than twice as high compared to the Ru-free alloy and a difference in thermomechanical fatigue behavior is also displayed. Microstructure studies by scanning electron microscopy and transmission electron microscopy revealed that the deformation mechanism of the Ru-free alloy in the initial stage is the movement of dislocations in the γ matrix. In the later stage of the thermomechanical fatigue test, large amounts of twins are formed in the material, and a large number of stacking faults and dislocations are sheared into the γ' precipitates. By comparing with the Ru-free alloy, the Ru-doped alloy has a higher matrix strength due to the solid solution strengthening effect of Ru, and is also prone to different deformation mechanisms. For example, the stacking faults are formed in the initial thermomechanical fatigue cycles and remain in the matrix throughout the entire thermomechanical fatigue process. The formation of twins, on the other hand, is suppressed by Ru addition. Such effects are believed to extend the thermomechanical fatigue life effectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. High temperature fatigue of nickel-base superalloys – a review with special emphasis on deformation modes and oxidation10.1016/j.engfailanal.2009.01.010 ↗
2. Thermomechanical fatigue behavior of the third-generation, single-crystal superalloy TMS-75: Deformation structure10.1007/s11661-004-0086-8 ↗
3. Thermomechanical fatigue mechanism in a modern single crystal nickel base superalloy TMS-8210.1016/j.actamat.2008.02.035 ↗
4. A comparative study on thermomechanical and low cycle fatigue failures of a single crystal nickel-based superalloy10.1016/j.ijfatigue.2011.07.009 ↗
5. Low cycle fatigue of a nickel based superalloy at high temperature: deformation microstructures10.1016/S0921-5093(01)01235-7 ↗
6. Creep resistance of CMSX-3 nickel-base superalloy single-crystals10.1016/0956-7151(92)90195-K ↗
7. Anisotropic creep properties of the nickel-base superalloy CMSX-410.1016/1359-6454(95)00315-0 ↗
8. Low cycle fatigue behavior of Inconel 718 at 298 K and 823 K10.1007/BF02667395 ↗
9. Aspects of thermomechanical fatigue of two single crystal nickel based superalloys10.1179/026708303225003054 ↗
10. Thermo-mechanical fatigue of single crystal nickel-based superalloy DD810.1016/S1359-6462(03)00051-4 ↗
11. Thermo-mechanical fatigue behavior of a single crystal nickel-based superalloy10.1016/j.msea.2011.04.083 ↗
12. Aspects of high-temperature low-cycle thermomechanical fatigue of a single-crystal nickel-base superalloy10.1111/j.1460-2695.1993.tb00755.x ↗
13. Superior thermo-mechanical fatigue property of a superalloy due to its heterogeneous microstructure10.1016/j.scriptamat.2006.06.012 ↗
14. Influence of phase shift and strain path on the thermomechanical fatigue behavior of CMSX-4 specimens10.1016/j.ijfatigue.2007.01.035 ↗
15. Investigations on the thermo-mechanical fatigue of two Ni-based single-crystal superalloys10.1016/j.msea.2004.11.013 ↗
16. Deformation and damage mechanisms during thermal-mechanical fatigue of a single-crystal superalloy10.1016/j.actamat.2009.01.027 ↗
17. Deformation twins and failure due to thermo-mechanical cycling in TMS-75 superalloy10.1016/j.scriptamat.2005.10.030 ↗
18. Crack appearance of single-crystal nickel-base superalloys after thermomechanical fatigue failure10.1016/j.scriptamat.2009.08.036 ↗
19. Behavior of nickel-base superalloy single crystals under thermal-mechanical fatigue10.1007/BF02646679 ↗
20. Dislocation distributions in monocrystalline nickel-based superalloys subjected to thermo-mechanical fatigue with and without hold times10.1111/ffe.12168 ↗
21. Localized microtwin formation and failure during out-of-phase thermomechanical fatigue of a single crystal nickel-based superalloy10.1016/j.ijfatigue.2013.01.015 ↗
22. Deformation and damage mechanisms during thermomechanical fatigue of a single-crystal superalloy in the <001> and <011> directions10.7449/2012/Superalloys_2012_215_223 ↗
23. The high temperature decrease of the critical resolved shear stress in nickel-base superalloys10.1016/S0921-5093(01)00944-3 ↗
24. Temperature effects on the transition from Lomer-Cottrell locks to deformation twinning in a Ni-Co-based superalloy10.1016/j.scriptamat.2016.07.033 ↗
25. A model for the creep deformation behaviour of single-crystal superalloy CMSX-410.1016/j.actamat.2007.11.031 ↗
26. Creep behavior of a 4.5%-Re single crystal nickel-based superalloy at intermediate temperatures10.1016/j.msea.2012.02.054 ↗
27. Effects of Ru and Re additions on the high temperature flow stresses of Ni-base single crystal superalloys10.1016/j.scriptamat.2004.10.039 ↗
28. Effect of ruthenium on the precipitation of topologically close packed phases in Ni-based superalloys of 3rd and 4th generation10.1016/j.actamat.2015.05.033 ↗
29. Effect of ruthenium on compressive creep of Ni-based single-crystal superalloy10.1016/j.scriptamat.2010.06.048 ↗
30. Identification of the partitioning characteristics of ruthenium in single crystal superalloys using atom probe tomography10.1016/j.scriptamat.2004.04.019 ↗
31. Multicomponent solid-solution hardening-Part 1 Proposed model10.1007/BF00540987 ↗
32. Modeling solid solution strengthening in nickel alloys10.1007/s11661-997-0268-2 ↗
33. On the creep behavior at 1033 K of new generation single-crystal superalloys10.1016/S0921-5093(04)00925-6 ↗
34. The effect of ruthenium on the intermediate to high temperature creep response of high refractory content single crystal nickel-base superalloys10.1016/j.msea.2007.12.045 ↗
35. On the effect of rhenium on the extent of primary creep in advanced Ni-based superalloys
36. Liu X, Roles of Mo and Ru in nickel-base single crystal superalloys. Doctor’s thesis Graduate school of the University of Chinese Academy of Sciences; 2014.
37. The formation of immobile dislocations during slip10.1080/14786440608520220 ↗
38. Dependence of stacking faults in gamma matrix on low-cycle fatigue behavior of a Ni-based single-crystal superalloy at elevated temperature10.1016/j.scriptamat.2018.04.020 ↗
39. Tension/compression asymmetry in yield and creep strengths of Ni-based superalloy with a high amount of tantalum10.1016/j.scriptamat.2006.03.048 ↗
40. Influence of secondary precipitates and crystallographic orientation on the strength of single crystals of a Ni-based superalloy10.1007/s11661-999-0274-7 ↗
41. Development of gamma phase stacking faults during high temperature creep of Ru-containing single crystal superalloys10.1016/j.actamat.2007.06.042 ↗
42. Tensile behaviors and deformation mechanisms of a nickel-base single crystal superalloy at different temperatures10.1016/j.msea.2014.01.001 ↗
43. Superlattice stacking fault formation and twinning during creep in γ/γ' single crystal superalloy CMSX-410.1016/S0921-5093(02)00172-7 ↗
44. The role of < 112 > 111 slip in the asymmetric nature of creep of single crystal superalloy CMSX-410.1016/S0921-5093(01)01688-4 ↗
45. Investigation of creep deformation mechanisms at intermediate temperatures in René 88 DT10.1016/j.actamat.2005.03.017 ↗
46. Primary creep in single crystal superalloys: Origins, mechanisms and effects10.1016/j.actamat.2006.09.026 ↗