Fatigue life prediction of in-situ TiB2/2024 aluminum matrix composite
Source abstract
Abstract
Abstract Fatigue performances of an in-situ TiB2 particle reinforced 2024-T4 alloy matrix composite (TiB2/2024Al) and 2024-T4 aluminum alloy (2024Al) were investigated. Stress- and strain-controlled fatigue experiments were conducted to obtain the fatigue lives. High-cycle fatigue performance was experimentally studied under different stress concentration levels. The results showed that the addition of in-situ particles enhances the fatigue resistance. A fatigue life prediction method was developed based on a damage-coupled Chaboche elastic–plastic constitutive model. Fatigue life predictions were performed using the established method and compared with the experiments. It was observed that the proposed method achieves fatigue life predictions with satisfactory accuracy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Metal matrix composites reinforced by nano-particles—a review [J]10.3390/met4010065 ↗
2. Peng Jin, Yue Liu, Shu Li, et al. Aerospace Applications of Particulate Reinforced Aluminum Matrix Composites [J]. Materials Review, 2009(11):28-31+43.
3. Development and application of particulate reinforced aluminum matrix composites [J]
4. A study on microstructural effect and mechanical behaviour of Al6061-5%SiC-TiB2 particulates reinforced hybrid metal matrix composites[J]10.1177/0021998319894666 ↗
5. Investigations on microstructure, mechanical properties and tribological behavior of in-situ Mg2Si particles reinforced AZ91 composites[J]
6. Stress analysis on the reinforcement particles of the metal matrix composite by
7. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites[J]10.1007/s00366-018-0649-8 ↗
8. An enhanced finite element model considering multi strengthening and damage mechanisms in particle reinforced metal matrix composites[J]10.1016/j.compstruct.2019.111281 ↗
9. A statistical analysis on erosion wear behaviour of A356 alloy reinforced with in situ formed TiB2 particles [J]10.1016/j.msea.2007.04.113 ↗
10. Development of Al 6063–TiB2 in situ composites [J]10.1016/j.matdes.2009.10.019 ↗
11. Investigation on particle strengthening effect in in-situ TiB2/2024 composite by nanoindentation test [J]10.1016/j.msea.2018.04.070 ↗
12. High temperature creep behavior of in situ synthesized TiB2/ZL109 composite [J]
13. High cycle fatigue behavior of the in-situ TiB2/7050 composite[J]
14. Contribution of machining to the fatigue behaviour of metal matrix composites (MMCs) of varying reinforcement size[J]10.1016/j.ijfatigue.2017.04.018 ↗
15. Fatigue crack growth in SiC particle reinforced Al alloy matrix composites at high and low R-ratios by in situ X-ray synchrotron tomography[J]
16. Fatigue behavior of in-situ TiB2/7050Al metal matrix composites: Fracture mechanisms and fatigue life modeling after milling[J]10.1016/j.ijfatigue.2020.105698 ↗
17. An eXtended Finite Element Method (XFEM) study on the effect of reinforcing particles on the crack propagation behavior in a metal–matrix composite[J]10.1016/j.ijfatigue.2012.05.004 ↗
18. The role of microstructural variability on the very high-cycle fatigue behavior of discontinuously-reinforced aluminum metal matrix composites using ultrasonic fatigue[J]10.1016/j.ijfatigue.2010.01.004 ↗
19. Low-cycle fatigue behavior of Al-based composites containing in situ TiB2, Al2O3, and Al3Ti reinforcements [J]10.1016/S0921-5093(03)00266-1 ↗
20. Cyclic deformation behavior of in situ aluminum–matrix composites of the system Al-Al3Ti-TiB2-Al2O3 [J]10.1016/j.compscitech.2004.02.006 ↗
21. High-cycle fatigue properties of Al-based composites reinforced with in situ TiB2 and Al2O3 particulates [J]10.1016/S0921-5093(04)00931-1 ↗
22. Bonnen J J, Allison J E, Jones J. W. Fatigue behavior of a 2XXX series aluminum alloy reinforced with 15 vol Pct SiCp [J]. Metallurgical Transactions A, 22(5):1007-1019.10.1007/BF02661094 ↗
23. Feifei Wang, Jianming Xu, Jianguo Li, et al. Fatigue crack initiation and propagation in A356 alloy reinforced with in situ TiB2 particles [J]. Materials & Design, 33(none):236-241.10.1016/j.matdes.2011.07.028 ↗
24. Uniaxial ratcheting of SiCp/6061Al alloy composites and its time-dependence at high temperature [J]
25. Springer M, Pettermann H E. Fatigue life predictions of metal structures based on a low–cycle, multiaxial fatigue damage model[J]. International Journal of Fatigue, 2018, 116(NOV.):355-365.10.1016/j.ijfatigue.2018.06.031 ↗
26. Continuum damage mechanics-based approach to the fatigue life prediction for 7050–T7451 aluminum alloy with impact pit[J]
27. Numerical simulation of cyclic plasticity and damage of an aluminium metal matrix composite with particulate SiC inclusions[J]10.1016/S0142-1123(02)00015-4 ↗
28. Modelling low-cycle fatigue life of particulate-reinforced metal-matrix composites[J]10.1016/S0921-5093(01)01854-8 ↗
29. Development of Cast Aluminium MMCs [J]
30. Investigation of the precipitation kinetics in an Al6061/TiB2 metal matrix composite [J]10.1016/S0921-5093(97)00104-4 ↗
31. Weixing Yao. Fatigue Life Prediction of Structures[M]. National Defense Industry Press; 2003.
32. Lemaitre · 1990
33. Constitutive modeling of ratchetting effects—Part I: experimental facts and properties of the classical models [J]10.1115/1.3226484 ↗
34. Engineering damage mechanics: ductile, creep, fatigue and brittle failures [J]
35. Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel: Damage evolution and damage-coupled visco-plastic constitutive model [J]10.1016/j.ijplas.2008.06.004 ↗
36. A continuous damage mechanics model for ductile fracture [J]10.1115/1.3225775 ↗
37. A non-linear continuous fatigue damage model [J]10.1111/j.1460-2695.1988.tb01216.x ↗
38. Lemaitre · 1996
39. Numerical simulations of the fatigue damage evolution at a fastener hole treated by cold expansion or with interference fit pin [J]