Corrosion fatigue behaviour of HFMI-treated butt welds

1. DNVGL-ST-0126. Support structures for wind turbines, April 2016.

2. Load calculation methods for offshore wind turbine foundations10.1080/17445302.2013.820108 ↗

3. Marquis · 2016

4. Ummenhofer T. REFRESH: Lebensdauerverlängerung bestehender und neuer geschweißter Stahlkonstruktionen, Research project, Final Report D 761, KIT Stahl- und Leichtbau, Versuchsanstalt für Stahl, Holz und Steine, Karlsruhe, Germany, 2009.

5. A round robin study of high-frequency mechanical impact (HFMI) - treated welded joints subjected to variable amplitude loading

6. Fatigue strength improvement factors for high strength steel welded joints treated by high frequency mechanical impact10.1016/j.ijfatigue.2012.05.002 ↗

7. Overview of fatigue data for high frequency mechanical impact treated welded joints10.1007/BF03321368 ↗

8. Fatigue behaviour of welded high-strength steels after high frequency mechanical post-weld treatments10.1007/BF03263475 ↗

9. Dürr A. Zur Ermüdungsfestigkeit von Schweißkonstruktionen aus höherfesten Baustählen bei Anwendung von UIT-Nachbehandlung, Dissertation, Fakultät Bau- und Umweltingenieurwissenschaften, Universität Stuttgart, 2006.

10. Fatigue enhancement of thin-walled, high-strength steel joints by high-frequency mechanical impact treatment10.1007/s40194-013-0097-4 ↗

11. DASt–Richtlinie 026. Ermüdungsverbesserung bei Andwendung höherfrequenter Hämmerverfahren, Deutscher Ausschuss für Stahlbau, Düsseldorf, 2019.

12. The influence of coverage for high frequency mechanical impact treatment of different steel grades10.1016/j.jmatprotec.2019.116437 ↗

13. Gkatzogiannis S. Finite element simulation of residual stresses from welding and high frequency hammer peening, Doctoral Dissertation, Karlsruhe Institute of Technology, Faculty of Civil Engineering, Geo and Environmental Sciences, 2020.

14. DNVGL-RP-0416. Corrosion Protection for Wind Turbines, March 2016.

15. Ummenhofer T, Gkatzogiannis S, Weidner P. Einfluss der Korrosion auf die Ermüdungsfestigkeit von Konstruktionen des Stahlwasserbaus, Tagungsband BAW Kolloquium - Korrosionsschutz und Tragfähigkeit bestehender Stahlwasserbau-verschlüsse. 8. und 9. Februar 2017, p. 80–86, Karlsruhe, 2017.

16. Corrosion protection systems and fatigue corrosion in offshore wind structures: current status and future perspectives10.3390/coatings7020025 ↗

17. Practical aspects of welding residual stress simulation10.1016/j.jcsr.2017.01.010 ↗

18. Gkatzogiannis S, Knoedel P, Ummenhofer T. FE simulation of high frequency mechanical impact (HFMI) treatment – first results. In: Proceeding of NORDIC STEEL 2019, The 14th Nordic steel construction conference, Copenhagen 18–20 September 2019, ce/papers, vol. 3, no. 34, Ernst & Sohn, 2019, p. 797–802.10.1002/cepa.1136 ↗

19. Calibration of HFMI simulation based on drop tests10.1007/s11665-020-04817-7 ↗

20. Ultrasonic impact treatment to improve stress corrosion cracking resistance of welded joints of aluminum alloy10.1007/s11665-016-2087-3 ↗

21. Ummenhofer T, Engelhardt I, Knödel P, Gkatzogiannis S, Weinert J, Löschner D. Erhöhung der Ermüdungsfestigkeit von Offshore-Windenergieanlagen durch Schweißnahtnachbehandlung unter Berücksichtigung des Korrosionseinflusses, Schlussbericht des Forschungsvorhabens DVS 09069 – IGF 18457 N, KIT Stahl- und Leichtbau, Versuchsanstalt für Stahl, Holz und Steine, Karlsruhe und Hochschule für angewandte Wissenschaften München, Labor für Stahl- und Leichtmetallbau, 2018.

22. SSC-400. Weld Detail Fatigue Life Improvement Techniques, 1997.

23. ISO 9227:2017, Corrosion Tests in Artificial Atmospheres — Salt Spray Tests.

24. ASTM D1141-98. Standard Practice for the Preparation of Substitute Ocean Water, 2013.

25. Weinert J, Gkatzogiannis S, Engelhardt I, Knoedel P, Ummenhofer T. Potential der Schweißnahtnachbehandlung mithilfe von höherfrequenten Hämmernverfahren für den Einsatz an Offshore Gründungsstrukturen, 19. Tagung Schweißen in der Maritimen Technik und im Ingenieurbau, Hamburg 24 - 25 April 2019, s. 92-105, 2019.

26. Increasing the fatigue strength of welded structural details in corrosive environments by applying high frequency mechanical impact treatment

27. Investigation of corrosive influence on the fatigue behaviour of HFMI-treated and as-welded transverse non-load-carrying attachments made of mild steel S355, under processing - to be submitted in

28. EN 1993-1-9:2009. Eurocode 3 - Design of steel structures - Part 1-9: Fatigue.

29. Hobbacher A. Recommendations for fatigue design of welded joints and components, IIW Commission XIII, Doc. XIII-2151r4-07/XV-1254r4-07, 2008.

30. DNVGL-RP-C203. Fatigue design of offshore steel structures, November 2015.

31. Correlation of laboratory and real marine corrosion for the investigation of corrosion fatigue behaviour of steel components10.1016/j.ijfatigue.2019.04.041 ↗

32. Einfluß von Prüffrequenz und Salzgehalt des Korrosionsmediums auf die Korrosionsermüdung von Stählen bei betriebsähnlichen Lastabläufen10.1002/maco.19860370704 ↗

33. Effect of surface roughness on step-Wise S-N characteristics in high strength steel10.1016/S0142-1123(02)00166-4 ↗

34. Effect of surface roughness on low-cycle fatigue behavior of type 304 stainless steel10.1007/BF02642305 ↗

35. Effect of pitting corrosion on fatigue crack initiation and fatigue life10.1016/S0013-7944(98)00101-5 ↗

36. Suresh · 2004

37. Fatigue-crack growth in an X-65 line-pipe steel at low cyclic frequencies in aqueous environments10.1115/1.3443302 ↗

38. Corrosion fatigue of BS 4360:50D structural steel in seawater10.1016/0142-1123(83)90025-7 ↗

39. Review of corrosion fatigue in offshore structures: present status and challenges in the offshore wind sector10.1016/j.rser.2016.02.017 ↗

40. ISO 7539-6:2003. Corrosion of metals and alloys - Stress corrosion testing – Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement, 2003.

41. Kolitsch S, Gaenser H-P, Pippan R. Determination of crack initiation and crack growth stress-life curves by fracture mechanics experiments and statistical analysis. In: Proceedings of the 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy, Procedia Structural Integrity, vol. 2, 2016, p. 3026–39.10.1016/j.prostr.2016.06.379 ↗

42. Fatigue loading on a 5MW offshore wind turbine due to the combined action of waves and current

43. Einfluss korrosiver Umgebung auf die Lebensdauer zyklisch beanspruchter Bauteile

44. Montgomery EL, Curran JC, Calle LM, Kolody MR. Timescale Correlation between Maritime Atmospheric Exposure and Accelerated Corrosion Testing, NACE-11353, NACE International, CORROSION 2011, 13-17 March, Houston, Texas, 2011.10.5006/C2011-11353 ↗

45. Viability of epoxy–siloxane hybrid coatings for preventing steel corrosion10.1016/j.porgcoat.2015.12.005 ↗

46. Chemistry of corrosion products on Zn–Al–Mg alloy coated steel10.1016/j.corsci.2010.05.044 ↗

47. DIN EN 10025-2:2005-04. Hot Rolled Products of Structural Steels - Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels, 2004.

48. ISO 4288:1996. Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Rules and Procedures for the Assessment of Surface Texture, 1996.

49. Fatigue crack initiation and growth on a steel in the very high cycle regime with sea water corrosion10.1016/j.engfracmech.2010.02.015 ↗

50. ISO 4063:2009. Welding and allied processes – Nomenclature of processes and reference numbers, 2009.

51. Gerin B, Pessard E, Morel F, Verdu C. Competition between surface defects and residual stresses on fatigue behaviour of shot peened forged components. In: 21 European Conference on Fracture ECF21, 20-24 June 2016 Catania, published in Procedia Structural Integrity, vol. 2, 2016, p. 3226–32.10.1016/j.prostr.2016.06.402 ↗

52. The influence of hammer peening on fatigue in high-strength steel10.1016/0142-1123(91)90483-F ↗

53. Morikage Y, Igi S, Oi K, Jo Y, Murakami K, Gotoh K. Effect of compressive residual stress on fatigue crack propagation. In: 14th International Conference on Pressure vessel Technology, published in Procedia Engineering, vol. 130, 2015, p. 1057–65.10.1016/j.proeng.2015.12.263 ↗

54. Wear and corrosion resistance of laser surface hardened structural steel10.1016/S0257-8972(02)00495-4 ↗

55. Effects of microstructure alteration on corrosion behavior of welded joint in API X70 pipeline steel10.1016/j.matdes.2012.09.051 ↗

56. Huang SW, Xuan FZ, Luo LH..Correlation between microstructure, hardness and corrosion of welded joints of disc rotors. In: 14th International Conference on Pressure Vessel Technology, published in Procedia Engineering, vol. 130, 2015, p. 1761–69.10.1016/j.proeng.2015.12.325 ↗

57. Sedlacek G, Hobbacher A, Nussbaumer A, Stötzel J. 1st Draft of the Background Document prEN 1993-1-9:2005, 2005.

58. Euler M, Kuhlmann U. Statistical Intervals for Evaluation of Test Data acc. to Eurocode 3 Part 1-9, 3rd Draft, Contribution to Working Group 6.3: Statistical Analysis of Fatigue Data ECCS Technical Committee 6 – Fatigue, Stuttgart, 2014.

59. Maddox SJ. Allowance for bending in fatigue design rules for welded joints, IIW Commission XIII, Doc. XIII-2580-15, 2015.