Fatigue resistance of press hardened 22MnB5 steels
Source abstract
Abstract
In press hardened steels, fatigue behaviour is very sensitive to surface defects or irregularities, either intrinsic or introduced during trimming operations. This work addresses the understanding and prediction of fatigue resistance of press hardened steels from a fracture mechanics approach. The size of fatigue originating defects were evaluated and used to estimate the fatigue limit for different surface conditions (coated and uncoated), different coatings (Al-Si and Zn) and different edge condition (polished and mechanically trimmed). Good agreement was found between calculated and experimental values, which shows the potential of fracture mechanics to estimate the fatigue performance of press hardened steels. © 2019 Elsevier Ltd
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
2. Picas I, Muñoz R, Lara A, Hernández R, Casellas D. Effect of the cutting process in the mechanical and fatigue properties of press hardened 22MnB5 steel. In: Proceedings of the 3rd international conference on hot sheet metal forming of high-performance steel (ISBN 978-3-942267-17-5); 2011. p. 85-92.
3. Picas I, Lara A, Casellas D, Ademaj A, Steinhoff K. Fatigue performance of press hardened steels with tailored material properties: a compromise between high strength and damage tolerant microstructures. In: Proceedings of the 4th international conference on hot sheet metal forming of high-performance steel (ISBN 978-3-942267-82-3); 2013. p. 251-8.
4. Effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels10.1016/j.jmatprotec.2013.05.003 ↗
5. Press hardening of truck chassis components
6. The effect of quenching and defects size on the HCF behaviour of Boron steel10.1016/j.ijfatigue.2014.06.002 ↗
7. Phase transformations in the Al-Si coating during the austenization step10.4028/www.scientific.net/SSP.172-174.784 ↗
8. microstructural and mechanical study of press hardening of thick boron steel sheet10.1088/1742-6596/896/1/012085 ↗
9. Exploring of crack initiation mechanisms and process parameter interactions in press hardened boron steel components actively protected by Zn-based coatings (ZINCOBOR) (RFCS project; 2012-2015).
10. Shear cutting of press hardened steel: influence of punch chamfer on process forces, tool stresses and sheared edge qualities10.1007/s11740-012-0404-8 ↗
11. Influence of microstructure on the fracture toughness of hot stamped boron steel10.1016/j.msea.2018.11.080 ↗
12. Murakami · 1987
13. Cutting process influence on fatigue sheet properties
14. Broeck · 1982 · 107
15. Effect of surface roughness on step-wise S-N characteristics in high strength steel10.1016/S0142-1123(02)00166-4 ↗
16. The use of areal surface topography characterization in relation to fatigue performance10.1051/matecconf/201816514013 ↗
17. Fatigue propagation threshold of short cracks under constant amplitude loading10.1016/S0142-1123(03)00065-3 ↗
18. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
19. Effect of substructure on mechanical properties and fracture behaviour of lath martensite in 0.1C-1.1S-1.7Mn steel10.1016/j.jallcom.2016.03.100 ↗
20. Suresh · 1998 · 302