Slip bands in lamellar TiAl during high cycle fatigue microcompression by correlative total strain mapping, diffraction orientation mapping and transmission electron imaging
Source abstract
Abstract
Abstract Microcompression testpieces of a lamellar γ-TiAl alloy were high cycle fatigued up to 105 cycles at stress ratios of 0.5–0.7, to maximum stresses above and below the yield stress. The localised deformation was studied by nano-scale digital image correlation strain mapping of a Pt patterned side-face of the pillars. With crystal orientation mapping, the fatigue deformation lines were found to locate at the γ/γ and γ/α2 lamellar interfaces. The deformation lines were closely spaced slip lines in transmission electron imaging. Gradients of shear strain developed along the deformation lines, increasing in magnitude as cycling progressed. Extensive transverse twinning also occurred.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Appel · 2011
2. High-temperature application of titanium alloys in gas turbines. material life cycle opportunities and threats – an industrial perspective10.1080/09603409.2016.1184423 ↗
3. Theory of brittle fracture in steel and similar metals
4. Recent progress in the high-cycle fatigue behaviour of γ-TiAl alloys
5. Fatigue properties of TiAl alloys10.1016/j.intermet.2004.09.007 ↗
6. Compression of micropillars of TiAl coexisting with Ti3Al10.1557/opl.2011.348 ↗
7. Deformation of lamellar TiAl alloys by longitudinal twinning10.1016/j.scriptamat.2016.03.004 ↗
8. Deformation mechanisms in micron-sized PST TiAl compression samples: experiment and model10.1016/j.actamat.2011.02.016 ↗
9. Longitudinal twinning in a TiAl alloy at high temperature by in situ microcompression10.1016/j.actamat.2018.01.007 ↗
10. Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression10.1016/j.actamat.2016.10.034 ↗
11. Compression property determination of a gamma titanium aluminide alloy using micro-specimens10.1016/j.scriptamat.2009.05.038 ↗
12. Micropillar compression of ceramics at elevated temperatures10.1016/j.scriptamat.2009.01.029 ↗
13. In situ micropillar compression reveals superior strength and ductility but an absence of damage in lamellar bone10.1038/nmat3959 ↗
14. Size and plasticity effects in zirconia micropillars compression10.1016/j.actamat.2015.10.047 ↗
15. Higher recovery and better energy dissipation at faster strain rates in carbon nanotube bundles: an in-situ study10.1021/nn300376j ↗
16. Superelastic cycling of Cu–Al–Ni shape memory alloy micropillars10.1016/j.actamat.2012.04.021 ↗
17. Origin of yielding in metallic glass: stress-induced flow10.1063/1.4884066 ↗
18. Microcompression and cyclic deformation behaviors of coaxial copper bicrystals with a single twin boundary10.1016/j.scriptamat.2013.04.004 ↗
19. Size effects in the fatigue behavior of thin Ag films10.1016/S1359-6454(02)00391-9 ↗
20. Cyclic response of copper single crystal micro-beams10.1016/j.scriptamat.2010.05.014 ↗
21. Mechanical annealing under low-amplitude cyclic loading in micropillars10.1016/j.jmps.2016.01.011 ↗
22. Micromechanical fatigue testing10.1007/BF02322482 ↗
23. Namazu T, Isono Y. High-cycle fatigue test of nanoscale Si and SiO2 wires based on AFM technique. In: The sixteenth annual international conference on micro electro mechanical systems, 2003. MEMS-03 Kyoto. IEEE; 2003. p. 662–5.10.1109/MEMSYS.2003.1189836 ↗
24. Michler J, Wehrs J, Moharty G, Schwiedrzik J, Guillonneau G, Schoeppner R, et al. Some recent advances in nanomechanical testing: High strain rates, variable temperatures, fatigue and stress relaxation, combinatorial experimentation; 2015.
25. Sutton · 2009
26. Mapping deformation in small-scale testing10.1016/j.actamat.2014.06.033 ↗
27. Deformation of lamellar γ-TiAl below the general yield stress10.1016/j.actamat.2018.09.061 ↗
28. Room-temperature tensile deformation of polysynthetically twinned (PST) crystals of TiAl10.1016/0956-7151(92)90472-Q ↗
29. Deformation of lamellar structure in TiAl-Ti3Al two-phase alloys10.1080/014186198253660 ↗
30. Elastic constants, fault energies, and dislocation reactions in TiAl: a first-principles total-energy investigation10.1080/09500839008215053 ↗
31. A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy10.1016/j.actamat.2015.09.050 ↗
32. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy10.1016/j.actamat.2015.07.016 ↗
33. Suresh · 1998
34. Persistent microslip bands in the lamellar TiAl structure subjected to room temperature fatigue10.1016/S1359-6462(01)01114-9 ↗
35. Transverse deformation in a lamellar TiAl alloy at high temperature by in situ microcompression10.1016/j.actamat.2018.11.050 ↗
36. A thermodynamical model for the nucleation of mechanical twins in TiAl10.1016/S1359-6454(02)00504-9 ↗
37. An energy approach to the formation of twins in TiAl10.1007/s11661-003-0184-z ↗
38. Crack opening due to deformation twin shear at grain boundaries in near-γ TiAl10.1016/j.intermet.2006.03.005 ↗
39. The interaction of borides and longitudinal twinning in polycrystalline TiAl alloys10.1016/j.actamat.2017.08.055 ↗
40. In-situ TEM study of fracture mechanisms of polysynthetically twinned (PST) crystals of TiAl alloys10.1016/S0921-5093(00)00903-5 ↗
41. Cyclic plasticity and variable amplitude fatigue10.1016/S0142-1123(03)00137-3 ↗
42. Strain gradient effects on cyclic plasticity10.1016/j.jmps.2010.01.007 ↗
43. A new mechanism of strain transfer in polycrystals