Modelling of the surface morphology and size effects on fatigue strength of L-PBF Inconel 718 by comparing different testing specimens
Source abstract
Abstract
The aim of this study was to investigate the impact of surface roughness and size effect on the uniaxial fatigue strength of aged specimens made of Inconel 718, obtained by laser-powder bed fusion (L-PBF) both under as-built and machined surface conditions. The surface profiles were scanned with a 3D optical profilometer, and then modelled and filtered by the fast Fourier transform. This latter allowed to obtain the relevant parameters to calculate the term area in the Murakami model to account for the effect of surface roughness on fatigue strength prediction. Two additional terms were added to the standard Murakami formula: one to account for the size effect and the other to consider the nonzero value of the average stress. A cylindrical plain and a miniaturized plain specimens, in the as-built condition, were employed to calibrate the proposed model, while a machined plain cylindrical and a miniaturized notched specimens were used as validators with low prediction errors.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. Review on powder-bed laser additive manufacturing of Inconel 718 parts10.1177/0954405415619883 ↗
2. Alloy 718 for oilfield applications10.1007/s11837-012-0238-z ↗
3. A review on properties of Inconel 625 and Inconel 718 fabricated using direct energy deposition
4. Effect of internal defects on the fatigue behavior of additive manufactured metal components: A comparison between Ti6Al4V and Inconel 71810.3390/ma15196882 ↗
5. Superalloy 718: Evolution of the alloy from high to low temperature application10.1007/978-3-319-89480-5_2 ↗
6. Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process10.3390/ma13112574 ↗
7. A method to optimize parameters development in L-PBF based on single and multitracks analysis: A case study on Inconel 718 alloy10.3390/met13020306 ↗
8. A review of mechanical properties of additively manufactured Inconel 718
9. Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion10.1016/j.jmatprotec.2020.116788 ↗
10. The effect of energy density on texture and mechanical anisotropy in selective laser melted Inconel 71810.1016/j.matdes.2020.108642 ↗
11. On selective laser melting of Inconel 718: Densification, surface roughness, and residual stresses10.1016/j.matdes.2020.108818 ↗
12. Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment10.1016/j.msea.2017.02.062 ↗
13. Melt pool geometry and morphology variability for the Inconel 718 alloy in a laser powder bed fusion additive manufacturing process
14. Influence of layer thickness on the printability of nickel alloy 718:A systematic process optimization framework
15. The theory of moving sources of heat and its application to metal treatments
16. Scaling expressions of characteristic values for a moving point heat source in steady state on a semi-infinite solid10.1016/j.ijheatmasstransfer.2019.02.042 ↗
17. Technological implications of the Rosenthal solution for a moving point heat source in steady state on a semi-infinite solid10.1016/j.matdes.2022.110991 ↗
18. Productivity-oriented SLM process parameters effect on the fatigue strength of Inconel 71810.1016/j.ijfatigue.2022.107384 ↗
19. Influence of post-processing on very high cycle fatigue resistance of Inconel 718 obtained with laser powder bed fusion10.1016/j.ijfatigue.2021.106510 ↗
20. Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy10.1016/j.msea.2015.06.021 ↗
21. Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects10.1111/ffe.13300 ↗
22. Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion10.1016/j.ijfatigue.2019.105392 ↗
23. Room and elevated temperature fatigue crack propagation behavior of Inconel 718 alloy fabricated by laser powder bed fusion10.1016/j.ijfatigue.2020.105802 ↗
24. As-built surface quality and fatigue resistance of Inconel 718 obtained by additive manufacturing
25. Crack closure under high load-ratio conditions for Inconel-718 near threshold behavior10.1016/j.engfracmech.2008.09.009 ↗
26. Influence of work-hardening on fatigue crack growth, effective threshold and crack opening behavior in the nickel-based superalloy Inconel 71810.1016/j.ijfatigue.2018.06.033 ↗
27. Effects of machining induced residual shear and normal stresses on fatigue life and stress intensity factor of Inconel 71810.3390/app9224750 ↗
28. Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion10.1016/j.msea.2019.06.003 ↗
29. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
30. Fatigue damage process of additively manufactured 316 L steel using X-ray computed tomography imaging
31. Multiaxial fatigue of additively manufactured metallic components: A review of the failure mechanisms and fatigue life prediction methodologies10.1016/j.pmatsci.2023.101126 ↗
32. Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects10.1016/j.ijfatigue.2018.07.035 ↗
33. On the consideration of normal and shear stress interaction in multiaxial fatigue damage analysis10.1016/j.ijfatigue.2017.03.042 ↗
34. Multiaxial fatigue of LB-PBF additive manufactured 17–4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy10.1016/j.ijfatigue.2020.105646 ↗
35. Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications10.1016/j.ijfatigue.2020.105479 ↗
36. The theory of critical distances10.1016/j.engfracmech.2007.04.007 ↗
37. Torsional-loaded notched specimen fatigue strength prediction based on mode I and mode III critical distances and fracture surface investigations with a 3D optical profilometer10.1016/j.ijfatigue.2022.106913 ↗
38. Taylor · 2007 · 306
39. Experimental determination and sensitivity analysis of the fatigue critical distance obtained with rounded V-notched specimens10.1016/j.ijfatigue.2018.03.037 ↗
40. Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen10.1016/j.ijfatigue.2017.10.002 ↗
41. Plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS-600-3: A double-notch critical distance approach to defect sensitivity10.1016/j.ijfatigue.2021.106414 ↗
42. Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity10.1016/j.ijfatigue.2018.12.020 ↗
43. Application of the Theory of Critical Distances to predict the effect of induced and process inherent defects for SLM Ti-6Al-4V in high cycle fatigue10.1016/j.cirp.2021.03.004 ↗
44. Multiaxial plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS-600-3: Combining multiaxial fatigue criteria, theory of critical distances, and defect sensitivity10.1016/j.ijfatigue.2021.106703 ↗
45. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
46. Surface roughness effect on multiaxial fatigue behavior of additive manufactured metals and its modeling10.1016/j.tafmec.2019.102260 ↗
47. Fatigue performance of additive manufactured metals under variable amplitude service loading conditions including multiaxial stresses and notch effects: Experiments and modelling10.1016/j.ijfatigue.2020.106002 ↗
48. Notched fatigue of additive manufactured metals under axial and multiaxial loadings, part II: Data correlations and life estimations10.1016/j.ijfatigue.2021.106648 ↗
49. Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance10.1016/j.ijfatigue.2019.105363 ↗
50. A generalized Paris’ law for fatigue crack growth10.1016/j.jmps.2006.01.007 ↗
51. Defect-based multiaxial fatigue life prediction of L-PBF additive manufactured metals10.1111/ffe.13449 ↗
52. Material defects as the basis of fatigue design10.1016/j.ijfatigue.2011.12.001 ↗
53. Torsional fatigue behavior of wrought and additive manufactured Ti-6Al-4V by powder bed fusion including surface finish effect10.1016/j.ijfatigue.2017.03.002 ↗
54. Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect10.1016/j.ijfatigue.2017.03.044 ↗
55. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
56. Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: Influence of orientation and temperature10.1016/j.ijfatigue.2020.105739 ↗
57. A comparison of Inconel 718 obtained with three L-PBF production systems in terms of process parameters, as-built surface quality, and fatigue performance10.1016/j.ijfatigue.2022.107004 ↗
58. Smooth and notch fatigue behavior of selectively laser melted Inconel 718 with as-built surfaces10.1016/j.ijfatigue.2019.105211 ↗
59. Influence of as-built surface topography on the fatigue behavior of SLM Inconel 718 : experiments and modeling
60. Effect of bending-torsion on fracture and fatigue life for 18Ni300 steel specimens produced by SLM10.1016/j.mechmat.2023.104576 ↗
61. Fractographical quantitative analysis of EN-AW 2024 aluminum alloy after creep pre-strain and LCF loading10.1016/j.engfracmech.2023.109182 ↗
62. Fractographic-fractal dimension correlation with crack initiation and fatigue life for notched aluminium alloys under bending load10.1016/j.engfailanal.2023.107285 ↗
63. The correlation of fractal dimension to fracture surface slope for fatigue crack initiation analysis under bending-torsion loading in high-strength steels10.1016/j.measurement.2023.113169 ↗
64. Murakami · 2019
65. Laser powder bed fusion of Inconel 718: Residual stress analysis before and after heat treatment10.3390/met9121290 ↗
66. Microstructure and residual stress evolution of laser powder bed fused Inconel 718 under heat treatments10.1007/s11665-020-05338-z ↗
67. A novel test method for the fatigue characterization of metal powder bed fused alloys10.1016/j.prostr.2017.11.062 ↗
68. Effects of laser scanning speed and building direction on the microstructure and mechanical properties of selective laser melted Inconel 718 superalloy
69. Additive manufacturing of functionally graded inconel 718: Effect of heat treatment and building orientation on microstructure and fatigue behaviour10.1016/j.jmatprotec.2022.117573 ↗
70. Elastic–plastic analysis of high load ratio fatigue tests on a shot-peened quenched and tempered steel, combining the Chaboche model and the Theory of Critical Distances10.1016/j.ijfatigue.2023.107713 ↗
71. Stress intensity factors handbook, vol. 310.1115/1.2900983 ↗
72. A relation between theoretical stress concentration factor and fatigue notch factor deduced from the concept of highly stressed volume
73. Experimentelle untersuchung des statistischen größeneinflusses im dauerschwingversuch an ungekerbten stahlproben10.1002/mawe.19750060204 ↗
74. Die vorhersage der dauerschwingfestigkeit unter berücksichtigung des statistischen größeneinflusses10.1002/mawe.19820130408 ↗
75. Probabilistic modelling of notch fatigue and size effect of components using highly stressed volume approach10.1016/j.ijfatigue.2019.06.002 ↗
76. Evaluation of critical distance, highly stressed volume, and weakest-link methods in notch fatigue analysis10.1016/j.ijfatigue.2022.106950 ↗
77. A combined critical distance and highly-stressed-volume model to evaluate the statistical size effect of the stress concentrator on low cycle fatigue of TA19 plate10.1016/j.ijfatigue.2016.10.003 ↗
78. Sonsino · 1995
79. Assessment of methods for prediction of notch and size effects at the fatigue limit based on test data by Böhm and Magin10.1016/j.ijfatigue.2010.03.011 ↗
80. Calculation of the fatigue limit of high-strength steel specimens at different loading conditions based on inclusion sizes10.1002/srin.202100252 ↗
81. A new energy based highly stressed volume concept to investigate the notch-pores interaction in thick-walled ductile cast iron subjected to uniaxial fatigue10.1016/j.ijfatigue.2022.107491 ↗
82. Applicability of fracture mechanics to very small cracks or the cracks in the early stage
83. Building the Kitagawa-Takahashi diagram of flawed materials and components using an optimized V-notched cylindrical specimen10.1016/j.engfracmech.2019.106810 ↗