Hydrogen embrittlement resistance of TWIP (twinning-induced plasticity) steel in high pressure hydrogen environment
Source abstract
Abstract
Abstract The behavior of as-received and cold-rolled Fe–25Mn–10Ni–0.65C twinning-induced plasticity steel in hydrogen environment was investigated using fatigue crack growth rate tests. The results show that TWIP steel shows weak hydrogen embrittlement susceptibility, which is due to the formation of deformation twins at the crack tip without strain-induced martensite. Hydrogen can promote the formation of deformation twins and may accumulate in the twin beam, which causes fatigue cracks in TWIP steel to propagate along the twin and slip bands in hydrogen environment. Cold rolling can substantially improve the hydrogen embrittlement resistance and fatigue resistance of TWIP steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Hydrogen storage – Industrial prospectives10.1016/j.ijhydene.2012.04.121 ↗
2. Hydrogen influence on some advanced high-strength steels10.1016/j.corsci.2017.06.012 ↗
3. Hydrogen Embrittlement of Automotive Advanced High-Strength Steels10.1007/s11661-012-1280-8 ↗
4. Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
5. Hydrogen-enhanced fatigue crack growth in a single-edge notched tensile specimen under in-situ hydrogen charging inside an environmental scanning electron microscope10.1016/j.actamat.2019.03.032 ↗
6. Formation of strain-induced martensite in selective laser melting austenitic stainless steel10.1016/j.msea.2018.10.121 ↗
7. Effect of alloying composition on low-cycle fatigue properties and microstructure of Fe–30Mn–(6–x)Si–xAl TRIP/TWIP alloys10.1016/j.msea.2013.08.061 ↗
8. Hydrogen-related phase transformations in austenitic stainless steels10.1007/BF02642872 ↗
9. Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas10.1016/j.ijhydene.2016.06.259 ↗
10. Design of a FeMnAlC steel with TWIP effect and evaluation of its tensile and fatigue properties10.1016/j.jallcom.2020.154806 ↗
11. Cumulative contribution of grain structure and twin boundaries on cyclic deformation behavior of a 20Mn-0.6C- TWIP steel: Experimental and theoretical analysis10.1016/j.msea.2019.138415 ↗
12. Microstructural hardness heterogeneity triggers fatigue crack non-propagation in as-hot-rolled Fe-30Mn-3Si-3Al twinning-induced plasticity steel10.1016/j.ijfatigue.2017.11.009 ↗
13. Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel10.1016/j.ijhydene.2016.09.188 ↗
14. High cycle fatigue behavior of high-Mn TWIP steel with different surface morphologies10.1016/j.ijfatigue.2020.105499 ↗
15. Small fatigue crack growth mechanisms of 304 stainless steel under different stress levels10.1016/j.ijfatigue.2014.01.027 ↗
16. A uniaxial tensile behavior based fatigue crack growth model10.1016/j.ijfatigue.2019.105324 ↗
17. Understanding the effect of crack tip deformation on fatigue crack growth behavior in 300-series austenitic stainless steel10.1016/j.ijfatigue.2019.03.045 ↗
18. The role of monotonic pre-deformation on the fatigue performance of a high-manganese austenitic TWIP steel10.1016/j.msea.2008.09.033 ↗
19. Hydrogen-induced twinning in 〈001〉 Hadfield steel single crystals10.1016/j.scriptamat.2010.08.029 ↗
20. Shear and laser cutting effects on hydrogen embrittlement of a high-Mn TWIP steel10.1016/j.engfailanal.2019.104243 ↗
21. Unravelling the effect of hydrogen on microstructure evolution under low-cycle fatigue in a high-manganese austenitic TWIP steel10.1016/j.ijplas.2019.11.004 ↗
22. Stacking Fault Energy Maps of Fe–Mn–Al–C–Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions10.1115/1.4033632 ↗
23. Stacking fault energy and plastic deformation of fully austenitic high manganese steels: Effect of Al addition10.1016/j.msea.2010.02.058 ↗
24. A general mechanism of martensitic nucleation: Part I. General concepts and the FCC→ HCP transformation
25. A general perspective of Fe-Mn-Al-C steels10.1007/s10853-018-2551-6 ↗
26. High ductility of spray formed low density TRIP steel with the improvement of δ-ferrite matrix10.1016/j.matchar.2019.109828 ↗
27. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application10.1016/S0749-6419(00)00015-2 ↗
28. High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
29. The dependence of fatigue crack growth on hydrogen in warm-rolled 316 austenitic stainless steel10.1016/j.ijhydene.2020.03.247 ↗
30. Effect of pre-strain on hydrogen embrittlement of metastable austenitic stainless steel under different hydrogen conditions10.1016/j.ijhydene.2019.08.046 ↗
31. The influence of microstructure on the hydrogen embrittlement susceptibility of martensitic advanced high strength steels10.1016/j.mtcomm.2018.07.011 ↗
32. In situ observations of transgranular crack propagation in high-manganese steel10.1016/j.scriptamat.2014.12.005 ↗
33. Fatigue Crack Growth Behavior and Associated Microstructure in a Metastable High-Entropy Alloy10.1016/j.prostr.2018.12.159 ↗
34. Cyclic slip irreversibility and fatigue life: A microstructure-based analysis10.1016/j.actamat.2012.10.029 ↗
35. In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy10.1016/j.actamat.2018.01.036 ↗
36. High-cycle fatigue behavior of ultrafine-grained austenitic stainless and TWIP steels10.1016/j.msea.2010.05.035 ↗
37. Solute cluster size effect on the fatigue crack propagation resistance of an underaged Al–Cu–Mg alloy10.1016/j.ijfatigue.2015.11.023 ↗
38. Fundamental factors on formation mechanism of dislocation arrangements in cyclically deformed fcc single crystals10.1016/j.pmatsci.2010.12.001 ↗
39. Hydrogen embrittlement controlled by reaction of dislocation with grain boundary in alpha-iron10.1016/j.ijplas.2018.08.013 ↗
40. The Role of Hydrogen and Other Interstitials in the Mechanical Behavior of Metals10.1007/s13632-016-0319-4 ↗
41. Overview of hydrogen embrittlement in high-Mn steels10.1016/j.ijhydene.2017.02.214 ↗
42. Hydrogen effects on nanovoid nucleation in face-centered cubic single-crystals10.1016/j.actamat.2007.09.012 ↗