Prediction of the crack growth propagation direction in non-proportional mixed-mode missions
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Fatigue and fracture mechanics · Structural Health Monitoring Techniques · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Combined static-cyclic multi-axial crack propagation in cruciform specimens10.1016/j.ijfatigue.2019.02.029 ↗
2. FEM-DBEM approach for crack propagation in a low pressure aeroengine turbine vane segment10.1016/j.tafmec.2016.05.004 ↗
3. On the crack extension in plates under plane loading and transverse shear ASME
4. On the failure of cracks under mixed-mode loads10.1023/A:1007499309587 ↗
5. Mixed-Mode I/II fracture behavior of an aluminium alloy10.1016/0022-5096(94)90001-9 ↗
6. A new criterion for the prediction of crack development in multiaxially loaded structures
7. Cracks on mixed mode loading—theories, experiments, simulations10.1016/j.ijfatigue.2013.06.019 ↗
8. A new three-dimensional fracture criterion10.4028/www.scientific.net/KEM.251-252.209 ↗
9. Multiple crack propagation with Dual Boundary Element Method in stiffened and reinforced full scale aeronautic panels10.4028/www.scientific.net/KEM.560.129 ↗
10. Non Linear MSD crack growth by DBEM for a riveted aeronautic reinforcement10.1016/j.advengsoft.2008.04.007 ↗
11. Dual boundary element method and finite element method for mixed-mode crack propagation simulations in a cracked hollow shaft10.1111/ffe.12655 ↗
12. Efficient FEM-DBEM coupled approach for crack propagation simulations10.1016/j.tafmec.2017.04.003 ↗
13. A review of fatigue crack growth in steels under mixed mode I and II loading10.1111/j.1460-2695.1992.tb00025.x ↗
14. The effect of steady torsion on fatigue crack growth in shafts10.1016/j.ijfatigue.2005.06.051 ↗
15. Fatigue crack growth under rotating bending loading on aluminium alloy 7075–T6 and the effect of a steady torsion10.1016/j.tafmec.2015.05.006 ↗
16. Mechanisms and fatigue performance of two steels in cyclic torsion with axial static torsion/compression10.1111/j.1460-2695.1997.tb00286.x ↗
17. Finite element analysis of fatigue crack growth with interspersed Mode I and mixed mode overloads10.1016/j.ijfatigue.2004.10.008 ↗
18. Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth10.1016/j.ijfatigue.2005.05.012 ↗
19. Mixed mode surface crack growth in aluminium alloys under complex stress state10.1016/j.prostr.2022.03.105 ↗
20. Determination of the crack propagation direction in mixed-mode missions due to cyclic loading10.3390/app11041673 ↗
21. Review of fatigue crack growth under non-proportional mixed-mode10.1016/j.ijfatigue.2013.04.001 ↗
22. Fatigue crack growth in AlCu4Mg1 under nonproportional bending-with-torsion loading
23. Influence of load and deformation-controlled multiaxial tests on fatigue life to crack initiation10.1016/S0142-1123(00)00079-7 ↗
24. Fatigue crack growth behavior of fine-grained steel S460N under proportional and non-proportional loading10.1016/j.engfracmech.2010.02.008 ↗
25. Highsmith S. Crack path determination for non-proportional mixed-mode fatigue. Ph.D. Thesis, Georgia Institute of Technology, George W. Woodruff School of Mechanical Engineering, Atlanta, GA, USA; May 2009.
26. Investigation of mixed mode fatigue crack propagation in SEN-specimen under in-phase and out-of-phase conditions due to tension-compression and torsional loading10.1051/matecconf/201930011006 ↗
27. In-phase and out-of-phase mixed mode loading: Investigation of fatigue crack growth in SEN specimen due to tension–compression and torsional loading10.1016/j.tafmec.2020.102586 ↗
28. Pilsen Toll s.r.o. Inspection Certificate 3.1—DIN EN 10204 for 34CrNiMo6+QT/1.6582/AISI 4340; Pilsen Toll s.r.o.: Plze ˇ n, Czech Republic, 17 October 2016.
29. Rodella · 2020
30. CalculiX. Available from: http://www.dhondt.de [accessed on 8th of February 2022].
31. On the use of isoparametric finite elements in linear fracture mechanics10.1002/nme.1620100103 ↗
32. General behavior of collapsed 8-node 2-D and 20-node 3-D isoparametric elements10.1002/nme.1620360708 ↗
33. Hahn · 1976
34. Mixed-mode K-calculations in anisotropic materials10.1016/S0013-7944(01)00127-8 ↗
35. ABAQUS manual. Available from: www.abaqus-docs.mit.edu [accessed on 3th of February 2022].
36. FRANC3D V7.4 Reference.pdf. Available from: www.fracanalysis.com [accessed on 3th of February 2022].
37. Methods for calculating stress intensity factors in anisotropic 398 materials: Part I—z = 0 is a symmetric plane10.1016/j.engfracmech.2004.12.007 ↗
38. Warzynek PA, Carter BJ, Banks-Sills L. The M-integral for computing stress intensity factors in generally anisotropic materials; 2005.
39. Theoretical crack path prediction10.1111/j.1460-2695.2004.00855.x ↗
40. Next generation 3D mixed mode fracture propagation theory including HCF–LCF interaction10.1016/j.engfracmech.2013.02.005 ↗
41. Forman RG, Mettu SR. Behavior of surface and corner cracks subjected to tensile and bending loads in a Ti-6Al-4V alloy; 1992.