On the low-cycle fatigue behavior of thermo-mechanically processed high-strength aluminum alloys

1. Mechanical properties at room temperature of an Al–Zn–Mg–Cu alloy processed by equal channel angular pressing10.1016/j.jallcom.2011.06.070 ↗

2. Influence of precipitates on low-cycle fatigue and crack growth behavior in an ultrafine-grained aluminum alloy10.1016/j.actamat.2014.07.061 ↗

3. Microstructure and texture evolution in cryorolled Al 7075 alloy10.1016/j.jallcom.2010.02.111 ↗

4. Comparative study of the application of steels and aluminium in lightweight production of automotive parts

5. Formability and lubrication of a B-pillar in hot stamping with 6061 and 7075 aluminum alloy sheets10.1016/j.proeng.2017.10.819 ↗

6. Hot Stamping of a B-Pillar Outer from High Strength Aluminum Sheet AA707510.4271/2014-01-0981 ↗

7. Effect of compositional variations on characteristics of coarse intermetallic particles in overaged 7000 aluminium alloys10.1179/026708301101509449 ↗

8. Application of modern aluminum alloys to aircraft10.1016/0376-0421(95)00004-6 ↗

9. Study of the constitutive behavior of 7075–T651 aluminum alloy10.1016/j.ijimpeng.2017.05.002 ↗

10. An investigation of the effects of solution heat treatment on mechanical properties for AA 6xxx alloys: Experimentation and modelling10.1016/j.ijplas.2004.11.002 ↗

11. Overview of Quick Plastic Forming Technology10.4028/www.scientific.net/MSF.551-552.3 ↗

12. Warm formability and post-forming microstructure/property of high-strength AA 7075–T6 Al alloy10.1016/j.msea.2016.08.054 ↗

13. Alistair DF, Dean TA, Jianguo L. Process for forming aluminium alloy sheet components. WO 2010/032002; 2009.

14. Hot stamping of an Al-Li alloy: A feasibility study10.1051/matecconf/20152105007 ↗

15. Thermo-mechanical forming procedure of high strength Aluminum sheet with improved mechanical properties and process efficiency

16. Effect of Tool Temperature on Mechanical Properties and Microstructure of Thermo-Mechanically Processed AA6082 and AA7075 Aluminum Alloys10.3139/105.110412 ↗

17. Influence of process parameters on properties of AA6082 in hot forming process10.1016/S1003-6326(17)60272-3 ↗

18. A Novel Experimental Design to Obtain Forming Limit Diagram of Aluminium Alloys for Solution Heat Treatment, Forming and In-Die Quenching Process10.4028/www.scientific.net/KEM.622-623.241 ↗

19. Performance of Thermo-Mechanically Processed AA7075 Alloy at Elevated Temperatures—From Microstructure to Mechanical Properties10.3390/met10070884 ↗

20. Dynamic Tensile Deformation of High Strength Aluminum Alloys Processed Following Novel Thermomechanical Treatment Strategies10.1002/adem.202000193 ↗

21. Investigation on strengthening of 6A02 aluminum alloy sheet in hot forming-quenching integrated process with warm forming-dies10.1016/j.msea.2013.08.059 ↗

22. On the Effect of Quenching on Postweld Heat Treatment of Friction-Stir-Welded Aluminum 7075 Alloy10.1007/s11665-019-04252-3 ↗

23. Microstructure and Cyclic Deformation Behavior of a Friction-Stir-Welded 7075 Al Alloy10.1007/s11661-009-0152-3 ↗

24. Effect of orientation and extrusion welds on the fatigue life of an Al-Mg-Si-Mn alloy10.1016/j.ijfatigue.2007.11.013 ↗

25. Equal-channel angular pressing influencing the mean stress sensitivity in the high cycle fatigue regime of the 6082 aluminum alloy10.1016/j.msea.2020.140014 ↗

26. Effects of microstructural heterogeneity on very high cycle fatigue properties of 7050–T7451 aluminum alloy friction stir butt welds10.1016/j.ijfatigue.2015.10.001 ↗

27. Fatigue crack growth resistance of 7075 Al alloy after equal channel angular pressing10.1111/ffe.12472 ↗

28. Improving the fatigue strength of 7075 alloy through aging10.1016/j.msea.2018.09.047 ↗

29. Effect of aging time and aging temperature on fatigue and fracture behavior of 6063 aluminum alloy under seawater influence10.1016/j.matdes.2006.12.003 ↗

30. Room-temperature low-cycle fatigue and fracture behaviour of asymmetrically rolled high-strength 7050 aluminium alloy plates10.1016/j.ijfatigue.2020.105919 ↗

31. Effect of tensile pre-strain on low-cycle fatigue behaviour of 7050–T6 aluminium alloy10.1016/j.engfailanal.2020.104592 ↗

32. Role of ultrasonic shot peening on low cycle fatigue behavior of 7075 aluminium alloy10.1016/j.ijfatigue.2017.06.033 ↗

33. May A, Belouchrani MA, Taharboucht S, Boudras A. Influence of heat treatment on the fatigue behaviour of two aluminium alloys 2024 and 2024 plated. Procedia Eng., vol 2, Elsevier; 2010, p. 1795–804. Doi: 10.1016/j.proeng.2010.03.193.10.1016/j.proeng.2010.03.193 ↗

34. Effect of grain size on the fatigue crack growth behavior of 2524–T3 aluminum alloy10.1016/j.acme.2016.01.004 ↗

35. Effect of grain size on fatigue-crack growth in 2524 aluminium alloy10.1016/j.ijfatigue.2015.11.011 ↗

36. Study on the fatigue life and damage accumulation of a compressor blade based on a modified nonlinear damage model10.1111/ffe.12753 ↗

37. The effects of residual stress on fatigue behavior and crack propagation from laser shock processing-worked hole10.1016/j.matdes.2012.07.024 ↗

38. Effect of Overaging on the Cyclic Deformation Behavior of an AA6061 Aluminum Alloy10.3390/met8070528 ↗

39. The role of monotonic pre-deformation on the fatigue performance of a high-manganese austenitic TWIP steel10.1016/j.msea.2008.09.033 ↗

40. On the low cycle fatigue response of CoCrNiFeMn high entropy alloy with ultra-fine grain structure10.1016/j.actamat.2020.116540 ↗

41. On the influence of ϰ-carbides on the low-cycle fatigue behavior of high-Mn light-weight steels10.1016/j.ijfatigue.2021.106327 ↗

42. On the structural integrity of Fe-36Ni Invar alloy processed by selective laser melting

43. Reduced fracturing of intermetallic particles during crack propagation in age hardening Al-based alloys due to PFZs10.1016/j.msea.2004.09.053 ↗

44. Effects of friction stir welding on microstructure of 7075 aluminum10.1016/S1359-6462(96)00344-2 ↗

45. Effect of thermo-mechanical processing on quench-induced precipitates morphology and mechanical properties in high strength AA7075 aluminum alloy10.1016/j.matchar.2021.111026 ↗

46. High-cycle, low-cycle, extremely low-cycle fatigue and monotonic fracture behaviors of low-carbon steel and itswelded joint10.3390/ma12244111 ↗

47. Cyclic deformation response of ultra-fine grained titanium at elevated temperatures10.1016/j.ijfatigue.2019.01.021 ↗

48. A remarkable improvement of low-cycle fatigue resistance of high-Mn austenitic TWIP alloys with similar tensile properties: Importance of slip mode10.1016/j.actamat.2016.07.034 ↗

49. Effect of aging treatments on the kinetics of fatigue crack growth in 7010 aluminum alloy10.1016/j.msea.2006.07.063 ↗

50. Transition of crack propagation from a transgranular to an intergranular path in an overaged Al-Zn-Mg-Cu alloy during cyclic loading10.1007/s12540-013-2009-y ↗

51. Suresh · 1998

52. Cyclic stress-strain response and microstructure under variable amplitude loading10.1111/j.1460-2695.1996.tb00971.x ↗

53. Christ H-J, Lades K, Völkl L, Mughrabi H. The Role of Microstructural Processes in the Application of the Incremental Step Test to Determine the Cyclic Stress-Strain Curve of an Aluminium Alloy. Low Cycle Fatigue Elasto-Plastic Behav Mater, Springer Netherlands; 1992, p. 100–5. Doi: 10.1007/978-94-011-2860-5_16.10.1007/978-94-011-2860-5_16 ↗

54. On the Low Cycle Fatigue Response of CoCrNiFeMn High Entropy Alloy with Ultra-fine Grain Structure

55. Christ · 2009

56. Mohamed A, El-Madhoun Y, Bassim MN. Dislocation boundary width changes due to cyclic hardening. Metall Mater Trans A Phys Metall Mater Sci, vol. 37, Springer; 2006, p. 3441–3. Doi: 10.1007/s11661-006-1039-1.10.1007/s11661-006-1039-1 ↗

57. Cyclic stress-strain response and dislocation structures in polycrystalline aluminum10.1016/S0921-5093(03)00347-2 ↗

58. Stress–strain time-dependent behavior of A356.0 aluminum alloy subjected to cyclic thermal and mechanical loadings10.1007/s11043-014-9238-4 ↗

59. On the low-cycle fatigue behavior of friction stir welded Al–Si12 parts produced by selective laser melting10.1016/j.msea.2019.138189 ↗

60. On the low-cycle fatigue response of pre-strained austenitic Fe61Mn24Ni6.5Cr8.5 alloy showing TWIP effect10.1016/j.ijfatigue.2012.01.002 ↗

61. Unexpected cyclic stress-strain response of dual-phase high-entropy alloys induced by partial reversibility of deformation10.1016/j.scriptamat.2017.09.013 ↗

62. Fatigue Damage Evolution in Ultrafine-Grained Interstitial-Free Steel10.1002/adem.201000272 ↗

63. Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth10.1098/rsta.2014.0132 ↗

64. Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis10.1016/j.ijfatigue.2012.06.007 ↗

65. Low cycle fatigue behavior of casting A319 alloy under two different aging conditions10.1016/j.msea.2015.12.023 ↗

66. The micromechanisms of fatigue crack growth in a commercial Al-Zn-Mg-Cu alloy10.1016/0001-6160(82)90175-4 ↗

67. Fatigue crack propagation under programmed loads and crack tip opening displacements10.1016/0013-7944(70)90031-7 ↗

68. A shear band decohesion model for small fatigue carck growth in an ultra-fine grain aluminium alloy10.1016/S0013-7944(99)00148-4 ↗

69. Cyclic stress-strain response of F.C.C. metals and alloys-I Phenomenological experiments10.1016/0001-6160(67)90137-X ↗

70. A quantitative approach to the cell shuttling model10.1016/0025-5416(83)90091-5 ↗

71. Fatigue Crack Initiation Mechanisms

72. Location, location & size: Defects close to surfaces dominate fatigue crack initiation10.1038/srep45239 ↗

73. Cyclic slip irreversibilities and the evolution of fatigue damage10.1007/s11663-009-9240-4 ↗

74. Half-cycle slip activity of persistent slip bands at different stages of fatigue life of polycrystalline nickel10.1016/j.msea.2008.03.027 ↗

75. On, “multi-stage” fatigue life diagrams and the relevant life-controlling mechanisms in ultrahigh-cycle fatigue10.1046/j.1460-2695.2002.00550.x ↗