Evolution of the residual stresses of types I, II, and III of duplex stainless steel during cyclic loading in high and very high cycle fatigue regimes
Source abstract
Abstract
Abstract Residual stresses (RSs) in the very high cycle fatigue regime have to be evaluated, as in some cases they are comparable with the applied stress, affecting the fatigue behaviour. In this work, the evolution of RSs in terms of types I, II, and III was investigated for a duplex stainless steel (DSS) during cyclic loading in high and very high cycle fatigue regimes. The results showed that the type I RS can increase the fatigue strength and prolong the fatigue life remarkably while the types II and III RSs varying in micro-scale dominate the micro-crack initiation mechanism of the DSS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Surface Treatment and Residual Stress · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Effect of 475°C embrittlement on the mechanical properties of duplex stainless steel10.1016/j.msea.2009.01.039 ↗
2. Anisotropy effects on the fatigue behaviour of rolled duplex stainless steels10.1016/S0142-1123(02)00173-1 ↗
3. Shear and bending performance of new type enhanced lattice truss structures10.1016/j.ijmecsci.2017.10.045 ↗
4. Fabrication and mechanical properties of three-dimensional enhanced lattice truss sandwich structures10.1177/1099636218789602 ↗
5. The development of grain-orientation-dependent residual stresses in a cyclically deformed alloy10.1038/nmat812 ↗
6. Interactions between the phase stress and the grain-orientation-dependent stress in duplex stainless steel during deformation10.1016/j.actamat.2006.04.019 ↗
7. Direct experimental mapping of microscale deformation heterogeneity in duplex stainless steel10.1016/j.msea.2008.02.021 ↗
8. Micromechanical behaviours of duplex steel: in situ neutron diffraction measurements and simulations10.1088/0953-8984/20/10/104259 ↗
9. An in situ high-energy X-ray diffraction study of micromechanical behaviour of multiple phases in advanced high-strength steels10.1016/j.actamat.2009.05.002 ↗
10. Micromechanical interactions in a superduplex stainless steel subjected to low cycle fatigue loading10.1111/j.1460-2695.2008.01277.x ↗
11. Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction10.1016/j.matdes.2016.03.137 ↗
12. Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy10.1016/j.matdes.2020.108505 ↗
13. Shot peening effects on residual stresses redistribution of offshore wind monopile multi-pass weldments10.1016/j.marstruc.2019.03.006 ↗
14. Effect of shot peening on residual stress distribution and tribological behaviours of 17Cr2Ni2MoVNb steel10.1016/j.surfcoat.2020.125497 ↗
15. Optimum design of compressive residual stress field caused by ultrasonic surface rolling with a mathematical model10.1016/j.apm.2019.07.009 ↗
16. Investigation into contributions of static and dynamic loads to compressive residual stress fields caused by ultrasonic surface rolling10.1016/j.ijmecsci.2019.105144 ↗
17. Contribution of ultrasonic surface rolling process to the fatigue properties of TB8 alloy with body-centered cubic structure10.1016/j.jmst.2020.05.047 ↗
18. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel10.1016/S0142-1123(01)00205-5 ↗
19. Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA611010.1016/j.msea.2005.11.064 ↗
20. Influence of shot peening on fatigue durability of normalized steel subjected to variable amplitude loading10.1016/j.ijfatigue.2011.11.011 ↗
21. Stability of shot peening induced residual stresses and their influence on fatigue lifetime10.1016/j.msea.2010.09.050 ↗
22. Possel-Dölken I. Röntgenographische Bestimmung von Mikrospannungen in polykristallinen Werkstoffen und ihr Verhalten bei statischer Verformung und schwingender Beanspruchung. Doctorate Thesis, Aachen; 2007.
23. Mikroeigenspannungen in einem ferritischen und einem ferritisch austenitischen Stahl, Stabilität/Abbau bei der Schwingbeanspruchung
24. Load sharing between austenite and ferrite in a duplex stainless steel during cyclic loading10.1007/s11661-000-0166-3 ↗
25. Changes in the macrostresses and microstresses in steel with fatigue10.1016/0921-5093(92)90341-W ↗
26. Aktuelle Fragestellungen, experimentelle Herausforderungen und neue Forschungsergebnisse zum Ermüdungsverhalten metallischer Werkstoffe im Bereich sehr hoher Lastspielzahlen
27. XRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17–4PH10.1016/j.msea.2011.03.098 ↗
28. Inter- and intragranular stresses in cyclically-deformed 316 stainless steel10.1016/j.msea.2005.02.030 ↗
29. X-ray and neutron diffraction measurements of dislocation density and subgrain size in a friction-stir-welded aluminum alloy10.1007/s11661-009-9963-5 ↗
30. Neutron diffraction measurements of time-dependent residual stresses generated by severe thermomechanical deformation10.1016/j.scriptamat.2009.05.040 ↗
31. The behaviour of short fatigue cracks during Very High Cycle (VHCF) Fatigue of duplex stainless steel10.1016/j.engfracmech.2015.03.024 ↗
32. Dual role of deformation-induced geometrically necessary dislocations with respect to lattice plane misorientations and/or long-range internal stresses10.1016/j.actamat.2006.03.047 ↗
33. Precise measurement of strain accommodation in a Mg-Gd-Y-Zn alloy using cross-correlation-based high resolution EBSD10.1016/j.matchar.2020.110384 ↗
34. Investigation of nanoscale strains at the austenitic stainless steel 316L surface: coupling between nanogauges gratings and EBSD technique during in situ tensile test
35. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
36. Experimental and numerical assessment of fibre bridging toughening effects on the compressive behaviour of delaminated composite plates
37. Experimental investigation of delamination growth in composite laminates under a compressive load10.1155/2017/3431093 ↗
38. Small-scale patterning methods for digital image correlation under scanning electron microscopy10.1088/0957-0233/22/12/125501 ↗
39. Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction10.1016/j.actamat.2004.07.036 ↗
40. Residual stresses in cold drawn ferritic rods10.1016/j.scriptamat.2004.10.010 ↗
41. Anistropic high cycle fatigue of duplex steel: influence of microstresses10.3139/146.020007 ↗
42. Evolution of the residual stress state in a duplex stainless steel during loading10.1016/S1359-6454(99)00149-4 ↗
43. The effects of residual macrostresses and microstresses on fatigue crack initiation10.1016/S0921-5093(99)00779-0 ↗
44. Residual stress distribution and their influence on fatigue lifetimes10.1016/S0142-1123(01)00133-5 ↗
45. Totten · 2002
46. Dönges B. Ermüdungsmechanismen eines Duplexstahls bei niedrigen Spannungsamplituden:experimentelle Charakterisierung und modellmäßige Beschreibung des Einflusses der Mikrostruktur auf die Lebensdauer, Doctorate Thesis, Siegen; 2017.
47. Microcrack initiation mechanism of a duplex stainless steel under very high cycle fatigue loading condition: the significance of load partitioning and micro residual stresses10.1016/j.actamat.2020.08.042 ↗
48. Significance of crystallographic misorientation at phase boundaries for fatigue crack initiation in a duplex stainless steel during high and very high cycle fatigue loading10.1016/j.msea.2013.09.098 ↗
49. Experimental investigation and numerical description of the damage evolution in a duplex stainless steel subjected to VHCF-loading10.1016/j.msea.2015.08.021 ↗
50. Vacancy dipoles in fatigued copper10.1080/14786437608223793 ↗
51. Micromechanics theory of fatigue crack initiation applied to time-dependent fatigue