Fatigue behaviour of hot pressed austenitic TWIP steel and TWIP steel/Mg-PSZ composite materials
Source abstract
Abstract
Abstract This research work presents the fatigue behaviour of a high-alloyed austenitic TWIP steel as well as metal matrix composites based on this steel grade as matrix material and MgO partially stabilized zirconia (Mg-PSZ) as reinforcing phase. The specimens were produced using the hot pressing technique. The unreinforced steel and MMCs containing 5 and 10 vol.% Mg-PSZ were investigated under total strain control in order to clarify the influence of the ceramic reinforcement. The cyclic deformation behaviour in terms of cyclic softening and/or cyclic hardening as well as fatigue lives of the different materials are discussed. Microstructures were examined to study the deformation and dislocation structures as well as phase transformations using electron channelling contrast imaging (ECCI) and electron backscatter diffraction (EBSD), respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Energy-absorbing TRIP-steel/Mg-PSZ composite honeycomb structures based on ceramic extrusion at room temperature10.1111/j.1744-7402.2008.02321.x ↗
2. Microstructure and compression strength of novel TRIP-steel/Mg-PSZ composites10.1002/adem.200900210 ↗
3. Reinforcing mechanism of Mg-PSZ particles in highly-alloyed TRIP steel10.1002/srin.201100099 ↗
4. Orientation relationships between phases arising during compression testing in ZrO2-TRIP-steel composites10.1016/j.jallcom.2012.02.014 ↗
5. Strain-rate-dependent flow stress and failure of an Mg-PSZ reinforced TRIP matrix composite produced by spark plasma sintering10.1002/srin.201100268 ↗
6. SEM investigation of high-alloyed austenitic stainless cast steels with varying austenite stability at room temperature and 100°C10.1002/srin.201100293 ↗
7. Influence of temperature on phase transformation and deformation mechanisms of cast CrMnNi-TRIP/TWIP steel10.4028/www.scientific.net/SSP.172-174.172 ↗
8. Cyclic deformation behaviour of three austenitic cast CrMnNi TRIP/TWIP steels with various Ni content10.1002/srin.201100080 ↗
9. Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes10.2355/isijinternational.43.438 ↗
10. In situ characterization of deformation behavior of austenitic high manganese steels10.1002/srin.201100311 ↗
11. Strain-hardening of twinning-induced plasticity steels10.1016/j.scriptamat.2011.11.029 ↗
12. The role of monotonic pre-deformation on the fatigue performance of a high-manganese austenitic TWIP steel10.1016/j.msea.2008.09.033 ↗
13. Fatigue behavior of high-Mn TWIP steels10.1016/j.msea.2009.03.039 ↗
14. Fatigue behavior of four high-Mn twinning induced plasticity effect steels10.1007/s11661-010-0193-7 ↗
15. Hamada A, Porter D, Puustinen J, Rovatti L, Karjalainen P. Study of cyclic strain localization and fatigue fracture mechanism of high-manganese twinning-induced plasticity steels. In: Polák J, Kruml T, Man J, editors. Proceedings of XVI international colloquium mechanical fatigue of metals; 2012. p. 56–63.
16. Some aspects of the cyclic behavior of twinning-induced plasticity steels10.1016/j.scriptamat.2011.12.008 ↗
17. Transformation toughening in zirconia-containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
18. Determination of the phase distribution in sintered TRIP-matrix/Mg-PSZ composites using EBSD10.1002/srin.201100064 ↗
19. Glage A, Segel C, Weigelt C, Räthel J, Biermann H. Low cycle fatigue behavior of powder metallurgy stainless steel/Mg-PSZ composite materials. In: Proc of ECCM15, Venice; 2012.10.1002/srin.201100288 ↗
20. Stacking fault energy of cryogenic austenitic steels10.1088/1009-1963/11/6/315 ↗
21. Electron diffraction based techniques in scanning electron microscopy of bulk materials10.1016/S0968-4328(97)00032-2 ↗
22. Cyclic deformation of powder metallurgy stainless steel/Mg-PSZ composite materials10.1002/srin.201100288 ↗
23. Cyclic stress–strain behavior of particle reinforced metal matrix composites10.1016/S1359-6462(98)00067-0 ↗
24. Effect of reinforcement size on low cycle fatigue behavior of SiC particle reinforced aluminum matrix composites10.1016/0956-716X(95)00281-Y ↗
25. New method for evaluation of the Manson–Coffin–Basquin and Ramberg–Osgood equations with respect to compatibility10.1016/j.ijfatigue.2008.01.012 ↗
26. Experimental investigation on cyclic deformation behaviour of primary heat transport piping materials: masing analysis of hysteresis loops
27. Ellyin · 1997
28. Cyclic deformation and fatigue of selected ferritic and austenitic steels: specific aspects10.2355/isijinternational.37.1154 ↗
29. Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions10.1016/j.msea.2008.09.031 ↗
30. Contribution of deformation mechanisms to strength and ductility in two Cr–Mn grade austenitic stainless steels10.1016/j.msea.2012.08.108 ↗
31. Stacking fault model of ε-martensite and its DIFFaX implementation10.1107/S0021889811019558 ↗
32. Understanding the influence of particle size on strain versus fatigue life, and fracture behavior of aluminum alloy composites produced by spray deposition10.1007/s10853-010-4885-6 ↗