A comparison of Inconel 718 obtained with three L-PBF production systems in terms of process parameters, as-built surface quality, and fatigue performance

1. «ISO / ASTM52900-15, Standard Terminology for Additive Manufacturing – General Principles – Terminology, ASTM International, West Conshohocken, PA, 2015, www.astm.org».

2. Progress and perspectives in laser additive manufacturing of key aeroengine materials10.1016/j.ijmachtools.2021.103804 ↗

3. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗

4. Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing10.1108/aa.2012.03332baa.010 ↗

5. Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints10.1016/j.cirp.2016.05.004 ↗

6. Gibson · 2015 · 107

7. «Review of selective laser melting: Materials and applications»10.1063/1.4935926 ↗

8. Processing parameters in laser powder bed fusion metal additive manufacturing10.1016/j.matdes.2020.108762 ↗

9. Systematical review on the numerical simulations of laser powder bed additive manufacturing

10. Review: Materials Ecosystem for Additive Manufacturing Powder Bed Fusion Processes10.1007/s11837-019-03892-z ↗

11. Gebhardt A, Hötter J, e Ziebura D, «Impact of SLM build parameters on the surface quality», vol. RTejournal-Forum für Rapid Technologie, 2014; 2014, [Online]. Disponibile su: http://www.rtejournal.de/ausgabe11/3852.

12. Influence of gas atmosphere (Ar or He) on the laser powder bed fusion of a Ni-based alloy10.1016/j.jmatprotec.2020.116851 ↗

13. Fatigue behavior and modeling for additive manufactured 304L stainless steel: The effect of surface roughness10.1016/j.ijfatigue.2020.105856 ↗

14. Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V10.1179/1743284715Y.0000000053 ↗

15. Reed RC. The Superalloys: Fundamentals and Applications. Cambridge: Cambridge University Press; 2006. doi: 10.1017/CBO9780511541285.10.1017/CBO9780511541285 ↗

16. Life assessment of multiaxial thermomechanical fatigue of a nickel-based superalloy Inconel 71810.1016/j.ijfatigue.2018.11.018 ↗

17. Yasa E, Poyraz O. Powder Bed Fusion Additive Manufacturing of Ni-Based Superalloys: Applications, Characteristics, and Limitations. In: Advances in Civil and Industrial Engineering, Balasubramanian KR, Senthilkumar V, edtors. A c. di IGI Global; 2020, p. 249–270. doi: 10.4018/978-1-7998-4054-1.ch013.10.4018/978-1-7998-4054-1.ch013 ↗

18. Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition10.1016/j.msea.2019.138580 ↗

19. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗

20. Review on powder-bed laser additive manufacturing of Inconel 718 parts10.1177/0954405415619883 ↗

21. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting10.1016/j.msea.2015.05.035 ↗

22. Microstructure and Mechanical Properties of Inconel 718 Produced by SLM and Subsequent Heat Treatment10.4028/www.scientific.net/KEM.651-653.665 ↗

23. Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy10.1080/10426914.2016.1257805 ↗

24. Effects of post-processing route on fatigue performance of laser powder bed fusion Inconel 71810.1016/j.addma.2020.101442 ↗

25. Predicting fatigue life of metal LPBF components by combining a large fatigue database for different sample conditions with novel simulation strategies

26. The effect of defects and notches in quasi-static and fatigue loading of Inconel 718 specimens produced by selective laser melting10.1016/j.ijfatigue.2020.105637 ↗

27. Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 71810.1016/j.msea.2019.05.007 ↗

28. Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion10.1016/j.msea.2019.06.003 ↗

29. Morgan K, Wells D. Overview of Fatigue and Damage Tolerance Performance of SLM Alloy 718. NASA; 2017.

30. Fatigue behavior and modeling of additively manufactured IN718: The effect of surface treatments and surface measurement techniques10.1016/j.jmatprotec.2021.117475 ↗

31. As-built surface quality and fatigue resistance of Inconel 718 obtained by additive manufacturing

32. Microstructure and directional fatigue behavior of Inconel 718 produced by selective laser melting10.1016/j.prostr.2016.06.298 ↗

33. Smooth and notch fatigue behavior of selectively laser melted Inconel 718 with as-built surfaces10.1016/j.ijfatigue.2019.105211 ↗

34. «ASTM F3301–18 - Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion».

35. On the link between as-built surface quality and fatigue behavior of additively manufactured Inconel 71810.1016/j.prostr.2020.01.117 ↗

36. Nicoletto G, «An Efficient Test Method for the Quantification of Technology-Dependent Factors Affecting the Fatigue Behavior of Metallic Additive Manufacturing Components». In: Structural Integrity of Additive Manufactured Parts, Shamsaei N, Daniewicz S, Hrabe N, Beretta S, Waller J, Seifi M, editors. A c. di 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2020, pagg. 484–506. doi: 10.1520/STP162020180081.10.1520/STP162020180081 ↗

37. Anisotropic high cycle fatigue behavior of Ti–6Al–4V obtained by powder bed laser fusion10.1016/j.ijfatigue.2016.04.032 ↗

38. «ISO - ISO 6508-1:2016 - Metallic materials — Rockwell hardness test — Part 1: Test method». https://www.iso.org/standard/70460.html.

39. «ISO - ISO 4287:1997 - Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters». https://www.iso.org/standard/10132.html.

40. «ISO 25178-1:2016 - Geometrical product specifications (GPS) — Surface texture: Areal — Part 1: Indication of surface texture».

41. 2013

42. On selective laser melting of Inconel 718: Densification, surface roughness, and residual stresses10.1016/j.matdes.2020.108818 ↗

43. «RenishawAM250 In718 - Material Datasheet». https://resources.renishaw.com/en/details/data-sheet-in718-0405-powder-for-additive-manufacturing--94192.

44. EOS NickelAlloy IN718 Material Data Sheet, «EOS NickelAlloy IN718 Material Data Sheet». https://www.eos.info/03_system-related-assets/material-related-contents/metal-materials-and-examples/metal-material-datasheet/nickelalloy-inconel/material_datasheet_eos_nickelalloy_in718_m290_premium_en_web.pdf.

45. «SLM Ni-Alloy IN718 - Material Data Sheet». https://www.slm-solutions.com/fileadmin/Content/Powder/MDS/MDS_Ni-Alloy_IN718_0719_EN.pdf.

46. Diaz · 2019 · 341

47. E08 Committee, «ASTM, E739-10 - Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (-N) Fatigue Data», ASTM International. doi: 10.1520/E0739-10R15.10.1520/E0739-10R15 ↗

48. «ASTM E466-21 - Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials». Available on: https://www.astm.org/e0466-21.html.

49. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗

50. Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion