Study of the biaxial fatigue behaviour and overloads on S355 low carbon steel
Source abstract
Abstract
This work aimed to study the fatigue behaviour of S355 low carbon steel under uniaxial and biaxial loading conditions and to measure the overload effects under both types of loads. The analysis is performed with a local strain approach and with damage tolerance approach. Local strain based investigation was based on Fatemi Socie critical plane model. This allows the life reduction caused by growing the crack from a stress raiser to be quantified. The fatigue life reduction caused by applying simultaneously torsional and tension loads was also evaluated with Fatemi-Socie model. In addition, the crack opening displacement (COD) and the effective stress intensity factor (SIF) were evaluated experimentally via full-field technique of digital image correlation (DIC). Both COD and SIF have been useful to understand the transient effects caused by a 40% overload under the two types of load. In addition, COD measurements allowed the offset compliance method for evaluating the opening load to be applied on a cylindrical specimen subjected to tension load. SIF estimation was also useful to quantify the mode mixity (I + II) developed during the experiment under the two types of load.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Structural Load-Bearing Analysis · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Meggiolaro MA, De Castro JTP. Fatigue design techniques. Low-cycle and multiaxial fatigue, vol. II, 1st ed. Platform, C.I.P.
2. Fatigue failure criteria for combined cyclic stress10.1007/BF00053514 ↗
3. Sonsino CM, Grubisic V. Fatigue behaviour of cyclically softening and hardening steels under multiaxial elastic-plastic deformation, vol. 853; 1985.10.1520/STP36244S ↗
4. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
5. Multiaxial fatigue: a survey of the state of the art
6. Multiaxial fatigue damage criterion10.1115/1.3226012 ↗
7. Analysis of stresses and strains near the end of a crack traversing a plate10.1115/1.4011547 ↗
8. Critical analysis of crack growth propagation laws10.1115/1.3656900 ↗
9. Anderson · 2005
10. Numerical simulation of plasticity-induced fatigue crack closure with emphasis on the crack growth scheme: 2D and 3D analyses10.1016/j.engfracmech.2007.10.017 ↗
11. Sutton · 2009
12. Optical methods for measurement of fatigue crack closure: moiré interferometry and digital image correlation10.1111/j.1460-2695.2010.01447.x ↗
13. Bearing pressures and cracks
14. On the stress distribution at the base of a stationary crack10.1115/1.4011454 ↗
15. Muskhelishvili · 1953
16. Towards a new model of crack tip stress fields10.1007/s10704-008-9209-3 ↗
17. Evaluation of stress field parameters in fracture mechanics by photoelasticity—revisited10.1016/S0013-7944(96)00098-7 ↗
18. Measuring stress intensity factors during fatigue crack growth using thermoelasticity10.1111/j.1460-2695.2004.00782.x ↗
19. Estimation of stress intensity factor by digital image correlation10.1016/0013-7944(87)90124-X ↗
20. Synchrotron X-ray diffraction based method for stress intensity factor evaluation in the bulk of materials10.1016/j.tafmec.2018.09.010 ↗
21. Bridge deflection measurement using digital image correlation10.1111/j.1747-1567.2006.00132.x ↗
22. Scanning electron microscopy for quantitative small and large deformation measurements Part I: SEM imaging at magnifications from 200 to 10,00010.1007/s11340-007-9042-z ↗
23. High resolution digital image correlation measurements of strain accumulation in fatigue crack growth10.1016/j.ijfatigue.2012.06.010 ↗
24. A general method for determining mixed-mode stress intensity factors from isochromatic fringe patterns10.1016/0013-7944(79)90123-1 ↗
25. Evaluating mixed-mode stress intensity factors from full-field displacement fields obtained by optical methods10.1016/j.engfracmech.2006.08.004 ↗
26. Quantifying crack tip displacement fields with DIC10.1016/j.engfracmech.2010.03.025 ↗
27. The effects of overloads in fatigue crack growth10.1016/0142-1123(91)90479-I ↗
28. A study of overload effect on fatigue crack propagation using EBSD, FIB–DIC and FEM methods10.1016/j.engfracmech.2016.04.034 ↗
29. Experimental and numerical investigation of thickness effects in plasticity-induced fatigue crack closure10.1016/j.ijfatigue.2008.12.003 ↗
30. Effect of overload on crack closure in thick and thin specimens via digital image correlation10.1016/j.ijfatigue.2013.07.002 ↗
31. Study of the influence of mixed mode overload on mode I fatigue crack propagation10.1016/0308-0161(93)90008-H ↗
32. Finite element analysis of fatigue crack growth with interspersed mode I and mixed mode overloads10.1016/j.ijfatigue.2004.10.008 ↗
33. Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth10.1016/j.ijfatigue.2005.05.012 ↗
34. Socie · 2000
35. Ecological criteria for the selection of materials in fatigue10.1111/ffe.12181 ↗
36. Suresh · 2004
37. ASTM E647-15. Standard test method for measurement of fatigue crack growth rates. West Conshohocken, PA; 2015 [ISBN 5967164006].
38. Characterisation of crack-tip fields in biaxial fatigue based on high-magnification image correlation and electro-spray technique10.1016/j.ijfatigue.2014.02.016 ↗
39. Locating the crack tip using displacement field data: a comparative study10.1111/str.12017 ↗
40. Documents R. ASTM E647-00: standard test method for measurement of fatigue crack growth rates. American Society of Testing and Materials, Annual Book of Standards, vol. 03; 1999.
41. Vic-2D V6 Reference Manual. Correlated Solutions Incorporated (C.S.Inc).
42. Evaluation of crack-tip fields from DIC data: a parametric study10.1016/j.ijfatigue.2016.03.006 ↗
43. A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials10.1007/s10704-005-1088-2 ↗
44. Study of crack orientation and fatigue life prediction in biaxial fatigue with critical plane models10.1016/j.engfracmech.2015.01.020 ↗
45. Systems, S.A. ANSYS; 1996.
46. Constitutive equations for cyclic plasticity10.1016/0749-6419(89)90015-6 ↗
47. Uniaxial and biaxial ratcheting of ST52 steel under variable amplitude loading-experiments and modeling10.1016/j.proeng.2015.02.024 ↗
48. Nonproportional low-cycle fatigue criterion for type 304 stainless steel10.1115/1.2804541 ↗
49. Nonproportional low cycle fatigue of 6061 aluminum alloy under 14 strain paths10.1016/S1566-1369(99)80006-5 ↗
50. Multiaxial high-cycle fatigue criterion and life prediction for metals10.1016/j.ijfatigue.2005.01.003 ↗
51. Development of a multiaxial fatigue damage model for high strength alloys using a critical plane methodology10.1115/1.2969255 ↗
52. Evaluation of mutiaxial fatigue criteria under irregular loading10.1016/S0142-1123(02)00013-0 ↗
53. Multiaxial fatigue and failure analysis of helical compression springs10.1016/j.engfailanal.2005.10.011 ↗
54. Image J.
55. Crack initiation and growth path under multiaxial fatigue loading in structural steels10.1016/j.ijfatigue.2009.01.013 ↗
56. Multiaxial variable amplitude fatigue life analysis using the critical plane approach, Part II: notched specimen experiments and life estimations10.1016/j.ijfatigue.2017.09.009 ↗
57. Optical and analytical investigation of overloads in biaxial fatigue cracks10.1016/j.ijfatigue.2016.12.035 ↗
58. Stephens · 2001
59. An automated method of computered-controlled low-cycle fatigue crack growth testing using the eslastic-plastic parameter cyclic
60. An algorithm for evaluating crack closure from local compliance measurements10.1046/j.1460-2695.2002.00444.x ↗
61. The stress intensity of mixed mode cracks determined by digital image correlation10.1243/03093247JSA419 ↗
62. Study of a crack at a fastener hole by digital image correlation10.1007/s11340-008-9161-1 ↗
63. Some experimental observations on crack closure and crack-tip plasticity10.1111/j.1460-2695.2009.01345.x ↗
64. Stress intensity factor monitoring under cyclic loading by digital image correlation10.1111/ffe.12825 ↗
65. Fatigue crack propagation from a crack inclined to the cyclic tensile axis10.1016/0013-7944(74)90007-1 ↗
66. A model for sliding mode crack closure. Parts I and II10.1016/0013-7944(95)00044-V ↗
67. Effects of non-proportional loading paths on the orientation of fatigue crack path10.1111/j.1460-2695.2005.00882.x ↗
68. Fatigue crack closure measurements on 2024–T3 sheet specimens10.1111/j.1460-2695.1995.tb00916.x ↗
69. Application of digital image correlation to the investigation of crack closure following overloads10.1016/j.proeng.2010.03.112 ↗
70. Digital image correlation measurement of near-tip fatigue crack displacement fields: constant amplitude loading and load history effects10.1111/j.1460-2695.2012.01707.x ↗
71. Variable amplitude loading in en8 (080m40) steel: a detailed experimental study of crack growth10.1111/j.1460-2695.1996.tb00960.x ↗
72. On the dominant role of crack closure on fatigue crack growth modeling10.1016/S0142-1123(03)00132-4 ↗
73. Experimental evaluation of crack shielding during fatigue crack growth using digital image correlation10.1111/ffe.12136 ↗
74. Effects of the transient mode II on the steady state crack growth in mode I10.1016/0013-7944(87)90029-4 ↗
75. On the influence of single and multiple peak overloads on fatigue crack propagation in 7075–T6511 aluminum10.1016/0013-7944(73)90034-9 ↗
76. Effects of a single tensile overload on fatigue crack growth in a 316L steel10.1046/j.1460-2695.1999.00225.x ↗