Study of random fatigue behavior of C/SiC composite thin-wall plates
Source abstract
Abstract
Abstract As an alternative method of acoustic experiment, vibration tests of C/SiC thin-wall plates were conducted to study the random fatigue behavior. The vibration specimen was clamped with cantilever boundary and subjected to limited-bandwidth vibration excitation. The strain history and fundamental frequency of the specimens were monitored during the vibration test. It was found that the measured strain value and strain amplitude value accorded with Gauss and Rayleigh distribution, respectively. The fundamental frequency decreased greatly when the vibration specimen failed, which could be recognized as failure criterion for the specimen under random loading. The microscopic fracture morphologies showed that the majority failure mode of fibers in the longitudinal and transverse directions were fiber pull-out and fiber splitting, respectively. The tensile force induced by reversed bending load is the main driving force for damage in specimen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Warren · 1991
2. Ding D. Processing: properties and applications of ceramic matrix composites, SiCf/SiC: an overview. In: Low IM, editor. Advances in ceramic matrix composites; 2014, p. 9–26.10.1533/9780857098825.1.9 ↗
3. Thermal-acoustic fatigue of a multilayer thermal protection system in combined extreme environments
4. The stochastic dynamic snap-through response of thermally buckled composite panels10.1016/j.compstruct.2015.05.032 ↗
5. Wolfe · 1995
6. Dynamic response of doubly curved honeycomb sandwich panels to random acoustic excitation. Part 1: experimental study10.1016/S0022-460X(02)01210-5 ↗
7. Some remarks on the acoustic fatigue of aluminum skin-stringer structures with either integrally milled or riveted edge reinforcements10.1016/S0034-1223(98)80003-1 ↗
8. Jacobs JH, Gruensfelder C, Hedgecock CE. Thermal acoustic fatigue of ceramic matrix composite materials. In: Proceedings of the 34th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference; 1993, p. 200–06.10.2514/6.1993-1319 ↗
9. Introduction to the fatigue life prediction of composite materials and structures: past, present and future prospects
10. New specimen and horn design for combined tension and torsion ultrasonic fatigue testing in the very high cycle fatigue regime10.1016/j.ijfatigue.2017.05.022 ↗
11. ESDU Engineering Data: Acoustic Fatigue Series, Vol 1 General, endurance under acoustic loading, Vol 2, Loading actions, Damping, Vol 3, Stress/strain response to acoustic loading, Vol 4, Natural frequencies of plate structures, Vol 5, Natural frequencies of shell structures; Vol 6, Natural frequencies of sandwich panels and box structures, ESDU, International Ltd London.
12. Wolfe HF, Camden MP, Byrd LW et al. Development of failure criteria for dynamic high cycle fatigue of ceramic matrix composites. In: AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference and exhibit, 39th, and AIAA/ASME/AHS adaptive structures forum, Long Beach, CA; 1998, p. 2550–58.10.2514/6.1998-1976 ↗
13. Behavior of two-dimensional C/SiC composites subjected to thermal cycling in controlled environments10.1016/j.carbon.2005.07.003 ↗
14. On the fatigue failure of structures due to vibrations excited by random pressure fields10.1121/1.1909481 ↗
15. Rassaian M, Lee JC, Young GK et al. Acoustic pressure load conversion method to vibration spectra: US, US 6363789 B1; 2002.
16. Optimization of segmented constrained layer damping with mathematical programming using strain energy analysis and modal data10.1016/j.matdes.2009.07.026 ↗
17. Fatigue cracking and its influence on dynamic response characteristics of spot welded specimens10.1007/BF02427963 ↗
18. Fatigue behavior of aluminum stiffened plate subjected to random vibration loading10.1016/S1003-6326(14)63196-4 ↗
19. A hybrid frequency–time domain method for predicting multiaxial fatigue life of 7075–T6 aluminium alloy under random loading10.1111/ffe.12224 ↗
20. Evaluation of mechanical component fatigue behavior under random loads: Indirect frequency domain method10.1016/j.ijfatigue.2013.11.017 ↗
21. Random fatigue: a new frequency domain criterion for the damage evaluation of mechanical components10.1016/j.ijfatigue.2014.07.005 ↗
22. Fatigue life prediction of metal structures subjected to combined thermal-acoustic loadings using a new critical plane model10.1016/j.ijfatigue.2016.11.023 ↗
23. Fatigue life prediction under random loading conditions in 7475-T7351 aluminum alloy using the RMS model10.1177/1056789506058605 ↗