Low-temperature hot corrosion effects on the low-cycle fatigue lifetime and cracking behaviors of a powder metallurgy Ni-based superalloy
Source abstract
Abstract
Abstract In this paper, low-cycle fatigue (LCF) experiments were conducted to analyze the influence of low-temperature hot corrosion on the LCF behavior of the powder metallurgy Ni-based superalloy FGH96 at 700 °C. The LCF lifetime of the salt-coated samples was drastically lower than that of bare samples. The low-temperature hot corrosion would change the crack initiation mode (from subsurface defects to corrosion pits) and early propagation modes (from transgranular to intergranular). Moreover, the degradation mechanism of hot corrosion in the LCF lifetime was connected with early crack initiation resulting both from the deteriorated surface because of corrosion pits and the accelerated fatigue crack propagation due to weakened grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Microstructurally sensitive crack nucleation around inclusions in powder metallurgy nickel-based superalloys10.1016/j.actamat.2016.07.023 ↗
2. Mechanistic behaviour and modelling of creep in powder metallurgy FGH96 nickel superalloy10.1016/j.msea.2016.08.101 ↗
3. Influence of the different salt deposits on the fatigue behavior of a directionally solidified nickel-based superalloy10.1016/j.ijfatigue.2015.11.020 ↗
4. Hot corrosion in gas turbine components10.1016/S1350-6307(00)00035-2 ↗
5. Type II hot corrosion: behavior of CMSX-4 and IN738LC as a function of corrosion environment10.1002/maco.201307425 ↗
6. Hot corrosion failure in the first stage nozzle of a gas turbine engine10.1016/j.engfailanal.2015.11.057 ↗
7. Hot corrosion of high-temperature alloys10.1146/annurev.ms.07.080177.002401 ↗
8. Hot corrosion of gas turbine alloys10.5006/0010-9312-23.3.72 ↗
9. Mechanisms for the hot corrosion of nickel-base alloys10.1007/BF02649626 ↗
10. Investigation of the mechanisms of Type-II hot corrosion of superalloy CMSX-410.1016/j.corsci.2013.11.048 ↗
11. Hot corrosion of materials: a fluxing mechanism?10.1016/S0010-938X(01)00057-9 ↗
12. An overview of Na2SO4 and/or V2O5 induced hot corrosion of Fe-and Ni-based superalloys
13. Pit morphology and depth after low-temperature hot corrosion of a disc alloy10.1080/09603409.2016.1174476 ↗
14. High-temperature corrosion of superalloys10.1080/02670836.1987.11782259 ↗
15. Hot corrosion and performance of nickel-based coatings
16. Hot corrosion of coated and uncoated single crystal gas turbine materials10.1002/maco.200804130 ↗
17. Hot corrosion of materials: fundamental studies10.1007/BF03222665 ↗
18. Effect of high-temperature hot corrosion on the low cycle fatigue behavior of a directionally solidified nickel-base superalloy10.1016/j.ijfatigue.2014.08.011 ↗
19. Influence of hot corrosion on low cycle fatigue behavior of nickel base superalloy SU 26310.1016/j.ijfatigue.2013.02.006 ↗
20. Effect of hot corrosion on the mechanical performances of superalloys and coating systems10.1016/0010-938X(93)90331-A ↗
21. Isothermal high temperature low cycle fatigue behavior of Nimonic-263: influence of type I and type II hot corrosion10.1016/j.msea.2014.11.016 ↗
22. Intermediate temperature, low-cycle fatigue behavior of coated and uncoated nickel base superalloys in air and corrosive sulfate environments10.1115/1.3225675 ↗
23. The effects of a liquid sulfate/chloride environment on superalloy stress rupture properties at 1300 F (704 °C)10.1007/BF02644383 ↗
24. Effect of hot corrosion on low cycle fatigue behavior of superalloy IN71810.1016/j.ijfatigue.2013.08.009 ↗
25. Effect of saline environment on lcf behavior of Inconel 718 at 550 °C10.1007/s11665-014-1278-z ↗
26. Factors affecting the corrosion fatigue life in nickel based superalloys for disc applications MATEC Web of Conferences
27. On the mechanistic basis of fatigue crack nucleation in Ni superalloy containing inclusions using high resolution electron backscatter diffraction10.1016/j.actamat.2015.06.035 ↗
28. Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature10.1016/j.actamat.2009.08.022 ↗
29. The effects of hot corrosion pits on the fatigue resistance of a disk superalloy10.1007/s11665-009-9399-5 ↗
30. Fatigue resistance of a hot corrosion exposed disk superalloy at varied test temperatures10.1080/09603409.2016.1179000 ↗
31. The flow behavior and constitutive equation in isothermal compression of FGH4096-GH4133B dual alloy10.1016/j.matdes.2014.06.063 ↗
32. Competing fatigue failure behaviors of Ni-based superalloy FGH96 at elevated temperature10.1016/j.msea.2016.05.034 ↗
33. Designation. E466-07, Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials. ASTM, 2007.
34. ISO 1099. Metallic materials–Fatigue testing — Axial force–controlled method. 2006.
35. High-temperature oxidation of FGH96 P/M superalloy10.1016/S1006-7191(07)60014-3 ↗
36. Simultaneous sulfidation-oxidation of nickel at 603° C in SO2-O2-SO3 atmospheres10.1007/BF02658326 ↗
37. Low temperature hot corrosion of cobalt-base alloys: Part II. Reaction mechanism10.1007/BF02647842 ↗
38. Experimental and theoretical investigation of environmental media on very-high-cycle fatigue behavior for a structural steel10.1016/j.actamat.2010.10.064 ↗
39. Corrosion fatigue behavior of extruded magnesium alloy AZ80-T5 in a 5% NaCl environment10.1016/j.engfracmech.2010.03.032 ↗
40. A continuum damage mechanics model for pit-to-crack transition in AA2024-T310.1016/j.corsci.2015.06.009 ↗
41. Test method for corrosion pit-to-fatigue crack transition from a corner of hole in 7075–T651 aluminum alloy10.1016/j.ijfatigue.2016.05.021 ↗
42. Pit to crack transition in stress corrosion cracking of a steam turbine disc steel10.1016/j.corsci.2003.09.017 ↗
43. Pit-to-crack transition under cyclic loading in 12% Cr steam turbine blade steel10.1016/j.ijfatigue.2014.10.010 ↗
44. Initiation sites for cracks developed from pits in a shot-peened 12Cr martensitic stainless steel10.1016/j.ijfatigue.2017.01.040 ↗
45. A study of the mechanism of internal sulfidation-internal oxidation during hot corrosion of Ni-base alloys10.1007/BF00659270 ↗
46. Effect of composition on the oxidation and hot corrosion resistance of NiAl doped with precious metals10.1016/S0257-8972(00)00878-1 ↗
47. Thermal evolution behavior of carbides and γ′ precipitates in FGH96 superalloy powder10.1016/j.matchar.2012.02.014 ↗
48. Correlation between grain boundary misorientation and M23C6 precipitation behaviors in a wrought Ni-based superalloy10.1016/j.matchar.2013.02.006 ↗