Variable amplitude very high cycle fatigue of 17-4PH steel with a stepwise S-N curve
Source abstract
Abstract
High and very high cycle fatigue (VHCF) tests were performed with 17-4PH stainless steel under constant amplitude (CA) and variable amplitude (VA) loading at load ratios of −1 and 0.05. Stepwise (duplex) S-N curves were determined with failure from surface inclusions above the transition stress amplitude, σtr, and from the interior below σtr. Similar σtr for CA and VA loading were found. VA failure occurred at Miner damage sums between 0.1 and 0.9 (surface failure) and 0.2 and 2.2 (internal failure). Omission of stress amplitudes less than 60% of the maximum amplitude is allowable for VA studies in the VHCF regime.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Cyclic deformation and fatigue behaviour of a-iron mono- and polycrystals10.1007/BF00053520 ↗
2. Microstructure and cyclic deformation behaviour of plain carbon and low alloy steels10.1016/0142-1123(90)90092-S ↗
3. Specific features of high-cycle and ultra-high-cycle fatigue10.1046/j.1460-2695.2002.00562.x ↗
4. Very high cycle fatigue of normalized carbon steels10.1016/j.ijfatigue.2005.05.016 ↗
5. Prediction of non propagating cracks10.1016/0013-7944(79)90081-X ↗
6. Factors affecting non-propagation of fatigue crack in a low-carbon steel (effect of oxide-induced crack closure)10.1299/jsmea.44.138 ↗
7. Fatigue damage of low amplitude cycles in low carbon steel10.1007/s10853-009-3751-x ↗
8. Material defects as the basis of fatigue design10.1016/j.ijfatigue.2011.12.001 ↗
9. Super-long life tension–compression fatigue properties of quenched and tempered 0.46% carbon steel10.1016/S0142-1123(98)00028-0 ↗
10. Stepwise S-N curve and fish-eye failure in gigacycle fatigue10.1046/j.1460-2695.1999.00206.x ↗
11. S-N curve characteristics and subsurface crack initiation behaviour in ultra-long life fatigue of a high carbon-chromium bearing steel10.1046/j.1460-2695.2001.00459.x ↗
12. Murakami Y, Endo M. Effects of hardness and crack geometries on DKth of small cracks emanating from small defects. In: Rios K.J.M.a.E.R.d.l., editor. The Behaviour of short fatigue cracks, EGF, Mech. Eng. Pub., London; 1986. p. 275–93.
13. Influence of inclusion size on fatigue behavior of high strength steels in the gigacycle fatigue regime10.1016/j.ijfatigue.2006.06.004 ↗
14. Effects of inclusion size and location on very-high-cycle fatigue behavior for high strength steels10.1016/j.msea.2012.07.118 ↗
15. On ́multi-stagéfatigue life diagrams and the relevant life-controlling mechanisms in ultrahigh-cycle fatigue10.1046/j.1460-2695.2002.00550.x ↗
16. Gigacycle fatigue properties of high-strength steels according to inclusion and ODA sizes10.1007/s11661-007-9225-3 ↗
17. Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime10.1016/j.ijfatigue.2014.03.003 ↗
18. Influence of inclusion type on the very high cycle fatigue properties of 18Ni maraging steel10.1007/s10853-017-0831-1 ↗
19. Mechanism of fatigue failure in ultralong life regime10.1046/j.1460-2695.2002.00576.x ↗
20. Characteristic S-N properties of high-carbon-chromium-bearing steel under axial loading in long-life fatigue10.1046/j.1460-2695.2002.00574.x ↗
21. Effect of stress ratio on long life fatigue behavior of high carbon chromium bearing steel under axial loading10.1016/j.ijfatigue.2005.04.018 ↗
22. Very high cycle fatigue properties of bearing steel under axial loading condition10.1016/j.ijfatigue.2008.11.001 ↗
23. Influence of mean stresses on fatigue life and damage of a turbine blade steel in the VHCF-regime10.1016/j.ijfatigue.2012.12.012 ↗
24. Influence of mean stress and variable amplitude loading on the fatigue behaviour of a high-strength steel in the VHCF regime Int10.1016/j.ijfatigue.2013.04.015 ↗
25. Mean stress sensitivity of spring steel in the very high cycle fatigue regime10.1007/s10853-015-9098-6 ↗
26. VHCF properties and fatigue limit prediction of precipitation hardened 17–4PH stainless steel10.1016/j.ijfatigue.2016.03.034 ↗
27. Inclusion initiated fracture under cyclic torsion very high cycle fatigue at different load ratios10.1016/j.ijfatigue.2019.01.015 ↗
28. Inclusion initiated fracture in spring steel under axial and torsion very high cycle fatigue loading at different load ratios10.1016/j.ijfatigue.2020.105525 ↗
29. The prediction of fatigue life in the crack initiation and propagation stages - a state of the art survey10.1016/0013-7944(79)90015-8 ↗
30. Fatigue of structures and materials in the 20th century and the state of the art10.1016/S0142-1123(03)00051-3 ↗
31. Betriebsfestigkeit in Germany - an overview10.1016/S0142-1123(01)00180-3 ↗
32. Fatigue testing under variable amplitude loading10.1016/j.ijfatigue.2006.10.011 ↗
33. Lifetime measurements for random loading in the very high cycle fatigue range10.1016/0142-1123(86)90021-6 ↗
34. Variable amplitude loading in the very high-cycle fatigue regime10.1046/j.1460-2695.2002.00570.x ↗
35. Influence of transformation induced crack closure on slow fatigue crack growth under variable amplitude loading10.1111/j.1460-2695.1995.tb00918.x ↗
36. Very high cycle fatigue properties of bainitic high-carbon-chromium steel under variable amplitude condition10.1016/j.ijfatigue.2009.02.038 ↗
37. Very high cycle fatigue properties of bainitic high-carbon-chromium steel10.1016/j.ijfatigue.2008.09.001 ↗
38. Experimental, analytical and numerical analyses of constant and variable amplitude loadings in the very high cycle fatigue regime10.1016/j.tafmec.2017.07.021 ↗
39. Visualization of internal small fatigue crack growth10.1016/j.matlet.2013.09.015 ↗
40. On the mechanism of fatigue failure in the superlong life regime (>107 cycles). Part I: influence of hydrogen trapped by inclusions10.1046/j.1460-2695.2000.00328.x ↗
41. On the mechanism of fatigue failure in the superlong life regime (>107 cycles). Part II: a fractographic investigation10.1046/j.1460-2695.2000.00343.x ↗
42. The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels10.1016/j.ijfatigue.2015.11.029 ↗
43. FGA formation mechanism for X10CrNiMoV12-2-2 and 34CrNiMo6 for constant and variable amplitude tests under the influence of applied mean loads10.1111/ffe.12797 ↗
44. Crack growth rates and microstructure feature of initiation region for very-high-cycle fatigue of a high-strength steel10.1111/ffe.12811 ↗
45. Characteristic of interior crack initiation and early growth for high cycle and very high cycle fatigue of a martensitic stainless steel10.1016/j.msea.2019.04.015 ↗
46. Interior induced fatigue of surface-strengthened steel under constant and variable loading: Failure mechanism and damage modeling10.1111/ffe.13103 ↗
47. Tensile and fatigue properties of 17–4 PH stainless steel at high temperatures10.1007/s11661-002-0180-8 ↗
48. Fatigue Limit prediction of the matrix of 17–4PH stainless steel based on small crack mechanics10.1115/1.4023428 ↗
49. Recent developments in ultrasonic fatigue10.1111/ffe.12365 ↗
50. Variable amplitude loading of Al 2024–T351 at different load ratios using ultrasonic equipment10.1016/j.ijfatigue.2013.06.014 ↗
51. Constant and variable amplitude fatigue testing of aluminum alloy 2024–T351 with ultrasonic and servo-hydraulic equipment10.1016/j.ijfatigue.2015.08.017 ↗
52. The influence of various types of small defects on the fatigue limit of precipitation-hardened 17–4PH stainless steel10.1016/j.tafmec.2016.10.003 ↗
53. Effect of small defects on the fatigue strength of martensitic stainless steels10.1016/j.ijfatigue.2019.06.021 ↗
54. Effect of delta ferrite on fatigue strength of SUS630 stainless steel10.2472/jsms.51.215 ↗
55. Die Lebensdauer von Kugellagern
56. Cumulative damage in fatigue10.1115/1.4009458 ↗
57. Experimental investigation on the small-load-omitting criterion10.1016/S0142-1123(01)00005-6 ↗
58. Strengthening and damaging under low-amplitude loads below the fatigue limit10.1016/j.ijfatigue.2008.08.004 ↗