Numerical and laboratory investigation of fatigue prediction models of asphalt containing glass wastes
Source abstract
Abstract
In the present study, the finite element method was applied to model the fatigue behavior of glassphalt and conventional mixtures. In order to assess the efficiency level of the presented model, all mixtures were tested using 4-point bending test. Accordingly, it can be seen that there is high consistency between the laboratory results and outputs of 3D finite element model presented in this study in both conventional asphalt and glassphalt mixes. The estimation models have predicted the fatigue life of similar samples with only a 3% error. Also, laboratory results showed a 5% improvement in the fatigue performance of the glassphalt rather than conventional mixtures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Analysis of fatigue cracking of warm mix asphalt. Influence of the manufacturing technology10.1016/j.ijfatigue.2018.01.029 ↗
2. A new analytical approach for stiffness loss modelling of asphalt mixtures under cyclic indirect tensile loadings10.1016/j.ijfatigue.2020.105535 ↗
3. A review on fatigue and rutting performance of asphalt mixes
4. Fatigue performance of interface bonding between asphalt pavement layers using four-point shear test set-up10.1016/j.ijfatigue.2018.12.018 ↗
5. Residual strength model and cumulative damage characterization of asphalt mixture subjected to repeated loading10.1016/j.ijfatigue.2020.105534 ↗
6. Damage analysis four-point bending fatigue tests on stone matrix asphalt using dissipated energy approaches10.1016/j.ijfatigue.2019.105453 ↗
7. Rutting and fatigue properties of crumbed rubber hot mix asphalts
8. Shafabakhsh G., Mirabdolazimi sM, Sadeghnejad M. Evaluation the effect of nano-TiO2 on the rutting and fatigue behavior of asphalt mixtures. Constr Build Mater, 2014;54:566–571.10.1016/j.conbuildmat.2013.12.064 ↗
9. Laboratory investigation of hot mix asphalt containing waste materials10.1080/14680629.2016.1189349 ↗
10. Laboratory evaluation of HMA with high density polyethylene as a modifier10.1016/j.conbuildmat.2010.12.037 ↗
11. Fatigue performance characterization and prediction of asphalt binders using the linear amplitude sweep based viscoelastic continuum damage approach10.1016/j.ijfatigue.2018.09.028 ↗
12. Arabani M, Mirabdolazimi sM, Sassani A. The effect of waste tire thread mesh on the dynamic behaviour of asphalt mixtures. Constr Build Mater 2010;24: 1060–1068.10.1016/j.conbuildmat.2009.11.011 ↗
13. Evaluating the effect of additives on improving asphalt mixtures fatigue behavior10.1016/j.conbuildmat.2015.04.046 ↗
14. Kim · 2009
15. Evaluation of fatigue crack behavior in asphalt concrete pavements with different polymer modifiers10.1016/j.conbuildmat.2011.08.017 ↗
16. Digital model of flexural fatigue testing for asphalt mixtures with micromechanical finite element method
17. Extended FEM modeling of crack propagation using semi-circular bending test10.1016/j.conbuildmat.2013.06.046 ↗
18. Weise C et al. Determination of the fatigue behaviour of asphalt base mixes using the indirect tensile and the 4 point bending test. in 2nd Workshop on Four Point Bending, Pais (ed.), University of Minho. 2009.
19. Experimental investigation of the fatigue behaviour of asphalt concrete mixtures containing waste iron powder10.1016/j.msea.2011.01.099 ↗
20. Wu S, Yang W, Xue Y. Preparation and properties of glass–asphalt concrete. Wuham, China: Key Laboratory for Silicate Materials Science and Engineering of Ministry of Education, Wuham University of Technology; 2004.
21. Yildirim Y, Qatan A, Prozzi J. Field manual for crack sealing in asphalt pavements; 2006.
22. Assessment of mechanical properties of rice husk ash modified asphalt mixture10.1016/j.conbuildmat.2017.05.127 ↗
23. Fatigue and permanent deformation models for polymer-modified asphalt mixtures10.3141/1767-17 ↗
24. Asphalt cracking: a Nottingham perspective
25. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives10.1016/j.conbuildmat.2009.06.036 ↗
26. Abendeh R. Effect of Waste Glass on Properties of Asphalt Concrete Mixtures. Jordan Journal of Civil Engineering; 2017:11.
27. Maupin · 1998
28. New achievements on positive effects of nanotechnology zyco-soil on rutting resistance and stiffness modulus of glasphalt mix10.1016/j.conbuildmat.2015.10.150 ↗
29. Evaluation of the visco-elasto-plastic behavior of glasphalt mixtures through generalized and classic Burger’s models modification10.1016/j.conbuildmat.2016.04.157 ↗
30. Airey GD, Collop AC, Thom NH. Mechanical performance of asphalt mixtures incorporating slag and glass secondary aggregates. In: Proceedings of the 8th Conference on Asphalt Pavements for Southern Africa (CAPSA’04), South Africa; 2004.
31. Properties of hot mix asphalt with substitued waste glass
32. Effect of glass cullet on the improvement of the dynamic behaviour of asphalt concrete10.1016/j.conbuildmat.2010.09.043 ↗
33. New achievements in visco-elastoplastic constitutive model and temperature sensitivity of glasphalt10.1080/10298436.2014.893317 ↗
34. Modeling the fatigue behaviors of glasphalt mixtures10.1016/j.scient.2012.02.021 ↗
35. Investigation of the effect of Larestan’s pipeline water on the mechanical properties of concretes containing granite aggregates10.1155/2019/4197186 ↗
36. Highway AAoS, Officials T, Program NCHR. AASHTO Guide for Design of Pavement Structures, 1993. The Association; 1993.
37. AASHTO ST. Standard method of test for determining the fatigue life of compacted hot-mix asphalt (HMA) subjected to repeated flexural bending. T321-03; 2007.
38. Fracture Analysis of a Special Cracked Lap Shear (CLS) Specimen with Utilization of Virtual Crack Closure Technique (VCCT) by Finite Element Methods10.1007/s11668-017-0243-1 ↗
39. Finite element based post-buckling analysis of refined graphene oxide reinforced concrete beams with geometrical imperfection
40. Investigation of mesh sensitivity influence to determine crack characteristic by finite element methods10.1007/s11668-016-0117-y ↗
41. Fatigue response of asphalt-aggregate mixtures (with discussion)
42. Pelgröm L. Engineering mechanical properties Densiasphalt. Report prepared for Densit a/s by KOAC-WMD; 2000.
43. Coni M et al. FE evaluation of 4-point bending test for fatigue cracking assessment. Pavement Cracking: Mechanisms, Modeling, Detection, Testing and Case Histories; 2008. p. 271.
44. Thermal fatigue behavior of asphalt concrete: a laboratory-based investigation approach10.1016/j.ijfatigue.2018.11.022 ↗
45. Effect of high density polyethylene on the fatigue and rutting performance of hot mix asphalt – a laboratory study10.1080/14680629.2013.876443 ↗