Notched fatigue of additive manufactured metals under axial and multiaxial loadings, part II: Data correlations and life estimations
Source abstract
Abstract
Abstract Fatigue performance of additive manufactured (AM) metals is highly sensitive to the existence of defects. This becomes more challenging when mechanically induced stress concentrations due to notches or complexities in the geometries are also present. Multiaxial stress states are additional important consideration in designing parts for critical load carrying applications. In this work, notched uniaxial and multiaxial fatigue and cracking behavior of two commonly used AM metals (Ti-6Al-4V and 17-4 PH stainless steel) with different post fabrication heat treatments and surface roughness conditions were studied. In part I of these two-part paper series, AM notch test results were compared to AM unnotched as well as to the notched and unnotched wrought counterparts. In this second part, both crack initiation (i.e., critical plane-based method) and crack growth (i.e., fracture mechanics-based method) approaches are used for uniaxial and multiaxial data correlations and life estimations. Both approaches are shown to result in satisfactory estimations of the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Fatigue and fracture mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys10.1016/j.ijfatigue.2020.106003 ↗
2. N. Gates, A. Fatemi, Notch deformation and stress gradient effects in multiaxial fatigue, Theoretical and Applied Fracture Mechanics.
3. Fatigue crack growth behaviour of tubular aluminium specimens with a circular hole under axial and torsion loadings10.1016/j.engfracmech.2014.04.010 ↗
4. Fatigue crack growth behavior in the presence of notches and multiaxial nominal stress states10.1016/j.engfracmech.2016.08.017 ↗
5. Small fatigue crack growth under multiaxial stresses10.1016/j.ijfatigue.2013.02.002 ↗
6. Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity10.1016/j.ijfatigue.2018.12.020 ↗
7. Multiaxial fatigue analysis of notched components using combined critical plane and critical distance approach10.1016/j.ijmecsci.2019.06.027 ↗
8. Multiaxial fatigue life assessment in notched components based on the effective strain energy density10.1016/j.prostr.2020.11.003 ↗
9. The critical distance method to estimate the fatigue strength of notched additively manufactured titanium alloys10.1016/j.prostr.2020.11.114 ↗
10. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
11. Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
12. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
13. Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties10.1016/j.phpro.2014.08.120 ↗
14. Effect of surface roughness on fatigue strength of Ti-6Al-4V alloy manufactured by additive manufacturing10.1016/j.prostr.2019.12.032 ↗
15. Combined effect of surface anomalies and volumetric defects on fatigue assessment of AlSi7Mg fabricated via laser powder bed fusion
16. Overview on microstructure and defect sensitive fatigue modeling of additively manufactured materials10.1007/s11837-018-2987-9 ↗
17. A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V10.1016/j.ijfatigue.2020.105584 ↗
18. Fatigue of additive manufactured Ti-6Al-4V, part II: The relationship between microstructure, material cyclic properties, and component performance10.1016/j.ijfatigue.2019.105363 ↗
19. Defect analysis for additively manufactured materials in fatigue from the viewpoint of quality control and statistics of extremes10.1016/j.prostr.2019.12.014 ↗
20. Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. I: Basic fatigue mechanism and evaluation of correlation between the fatigue fracture stress and the size and location of non-metallic inclusions10.1016/0142-1123(89)90054-6 ↗
21. Crack growth in a range of additively manufactured aerospace structural materials10.3390/aerospace5040118 ↗
22. Representing crack growth in additively manufactured Ti-6Al-4V10.1016/j.ijfatigue.2018.07.019 ↗
23. Defect-based fatigue life prediction of L-PBF additive manufactured metals10.1016/j.engfracmech.2021.107541 ↗
24. Defect-based multiaxial fatigue life prediction of L-PBF additive manufactured metals10.1111/ffe.13449 ↗
25. Multiaxial fatigue of additive manufactured metals: performance, analysis, and applications10.1016/j.ijfatigue.2020.105479 ↗
26. Multiaxial fatigue of LB-PBF additive manufactured 17–4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy10.1016/j.ijfatigue.2020.105646 ↗
27. Fatigue performance of additive manufactured metals under variable amplitude service loading conditions including multiaxial stresses and notch effects: experiments and modelling10.1016/j.ijfatigue.2020.106002 ↗
28. Notched fatigue behavior and stress analysis under multiaxial states of stress10.1016/j.ijfatigue.2014.01.014 ↗
29. The theory of critical distances: a review of its applications in fatigue10.1016/j.engfracmech.2006.12.004 ↗
30. The theory of critical distances10.1016/j.engfracmech.2007.04.007 ↗
31. Molaei R, Fatemi A. Crack paths in additive manufactured Ti-6Al-4V specimens subjected to multiaxial cyclic loads. In: 6th International Conference on Crack Paths (CP 2018), Italy, September, 2018.
32. Crack paths in additive manufactured metallic materials subjected to multiaxial cyclic loads including surface roughness, HIP, and notch effects10.1016/j.ijfatigue.2019.03.007 ↗
33. A Critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
34. On the consideration of normal and shear stress interaction in multiaxial fatigue damage analysis10.1016/j.ijfatigue.2017.03.042 ↗
35. Multiaxial fatigue of LB-PBF additive manufactured 17–4 PH stainless steel including the effects of surface roughness and HIP treatment
36. Multiaxial fatigue: An overview and some approximation models for life estimation10.1016/j.ijfatigue.2011.01.003 ↗
37. Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect10.1016/j.ijfatigue.2017.03.044 ↗
38. Newman J. FASTRAN-2: A fatigue crack growth structural analysis program,“ NASA STI/Recon Technical Report N, vol. 92, 1992.
39. Newman · 1981 · 53
40. Newman · 1982 · 255
41. Fatigue performance of additive manufactured Ti-6Al-4V using electron and laser beam melting10.1016/j.ijfatigue.2016.05.001 ↗
42. Fatigue crack growth behavior of additively manufactured 17–4 PH stainless steel: Effects of build orientation and microstructure10.1016/j.ijfatigue.2019.02.015 ↗
43. Molaei R, Fatemi A. Variable amplitude multiaxial fatigue behavior of additive manufactured metals. In: Proceedings of the Fourth International Conference on Material and Component Performance under Variable Amplitude Loading (VAL4), Scheduled from 30. March to 1. April 2020 in Darmstadt, Germany, Publisher: DVM, Berlin, pp. 65 - 77, 2020.
44. Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals10.1016/j.tafmec.2020.102638 ↗
45. Defect characteristics and analysis of their variability in metal additive manufacturing10.1016/j.matdes.2019.108091 ↗
46. Surface roughness effect on multiaxial fatigue behavior of additive manufactured metals and its modeling10.1016/j.tafmec.2019.102260 ↗