Evaluation of fatigue strength on multiaxial notched specimenss considering failure probability
Source abstract
Abstract
Abstract Based on the von-Mises criterion, the influence of stress gradient and additional strengthening effects on fatigue life are considered and a fatigue life prediction method suitable for notched specimens is established combining with Weibull distribution. Firstly, the maximum shear strain amplitude is defined as the damage parameter to determine the location of the critical plane, which can reflect the mechanism of crack initiation and propagation. Secondly, the equivalent stress gradient factor on the critical plane is obtained and the stress gradient influence index is introduced to characterize the degree of influence of the stress gradient. Finally, considering the effects of stress gradient and non-proportional additional strengthening, a new fatigue life prediction method is proposed based on the von-Mises criterion and the Weibull distribution, which can be used to obtain the fatigue life of multiaxial notched specimens under different failure probabilities. In order to verify the reliability of the proposed model, the prediction life using the proposed method, the SWT model, FS model and Manson-Coffin equation are compared with the experimental life of five materials (GH4169, TC4, Al7050, EN8, C40), and the compared results show that the accuracy of the proposed method is higher than that of the other three methods under proportional and non-proportional loading. Meanwhile, the P-S-N curves of multiaxial notched specimens with different failure probabilities are given and analysed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Mechanical stress and fatigue analysis · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A stress-based method to predict lifetime under multiaxial fatigue loadings10.1046/j.1460-2695.2003.00723.x ↗
2. Fatigue strength of notched specimens made of 40CrMoV13.9 under multiaxial loading10.1016/j.matdes.2013.08.013 ↗
3. Multiaxial fatigue analysis of notched components using combined critical plane and critical distance approach10.1016/j.ijmecsci.2019.06.027 ↗
4. A critical plane gradient approach for the prediction of notched HCF life10.1016/j.ijfatigue.2004.10.003 ↗
5. Proportional/nonproportional constant/variable amplitude multiaxial notch fatigue: cyclic plasticity, non-zero mean stresses, and critical distance/plane10.1111/ffe.13036 ↗
6. Stress distribution and fatigue crack propagation analyses in welded joints10.1111/ffe.12871 ↗
7. Fatigue life estimation for 2017A–T4 and 6082–T6 aluminium alloys subjected to bending-torsion with mean stress10.1016/j.ijfatigue.2015.05.005 ↗
8. The Effect of Surface Pit Treatment on Fretting Fatigue Crack Initiation10.32604/cmc.2020.012878 ↗
9. A new multiaxial fatigue life prediction model for aircraft aluminum alloy10.1016/j.ijfatigue.2020.105993 ↗
10. On the consideration of normal and shear stress interaction in multiaxial fatigue damage analysis10.1016/j.ijfatigue.2017.03.042 ↗
11. A convex hull-based approach for multiaxial high-cycle fatigue criteria10.1111/ffe.13318 ↗
12. Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials10.1016/j.ijfatigue.2018.03.028 ↗
13. Critical plane modelling of fatigue initiation under rolling and sliding contact10.1243/030932404773123949 ↗
14. Estimation of fatigue life under multiaxial loading by varying the critical plane orientation10.1016/j.ijfatigue.2016.10.028 ↗
15. Method for Predicting the Fatigue Life of Geometrically Discontinuous Structures Under Combined Bending and Torsion10.1111/ffe.13438 ↗
16. A novel model for low-cycle multiaxial fatigue life prediction based on the critical plane-damage parameter10.1007/s10338-019-00083-w ↗
17. Evaluation of notch size effect on LCF life of TA19 specimens based on the stress gradient modified critical distance method10.1111/ffe.12821 ↗
18. Size effect tests of different notch depth specimens with support rotation measurements10.1016/j.engfracmech.2016.02.028 ↗
19. Liu JH, Lv X, Wei YB, et al. A novel model for low-cycle multiaxial fatigue life prediction based on the critical plane-damage parameter. Sci. Prog. 2020, 103(3): doi:10.1177/0036850420936220.10.1177/0036850420936220 ↗
20. Multiaxial low cycle fatigue life of Ti-6Al-4V under non-proportional loading with mean strain10.1016/j.tafmec.2017.04.004 ↗
21. An accurate and efficient scheme for linear and nonlinear analyses based on a gradient-weighted technique10.1016/j.ijnonlinmec.2018.07.011 ↗
22. Non-probabilistic polygonal convex set model for structural uncertainty quantification10.1016/j.apm.2020.07.025 ↗
23. Recent advances on notch effects in metal fatigue: A review10.1111/ffe.13195 ↗
24. Assessment of notch fatigue and size effect using stress field intensity approach10.1016/j.ijfatigue.2021.106279 ↗
25. Fatigue life prediction of notched components under size effect using stress gradient-based approach
26. A new approach to fitting the three-parameter Weibull distribution: An application to glass ceramics10.1080/03610926.2019.1702698 ↗
27. A novel flexible additive Weibull distribution with real-life applications10.1080/03610926.2020.1732658 ↗
28. Fatigue-Life Prediction of Mechanical Element by Using the Weibull Distribution10.3390/app10186384 ↗
29. Stress Loading Analysis for Quayside Container Crane Draw Bar Based on VMD-Weibull Distribution10.1088/1742-6596/1637/1/012125 ↗
30. The effect of notch size on critical distance and fatigue life predictions - ScienceDirect10.1016/j.matdes.2020.109095 ↗
31. A New Method of Fatigue Life Prediction for Notched Specimen
32. The use of the theory of critical distance and the stress-gradient approach in the fatigue life estimation of notched components10.1177/1464420715605137 ↗
33. Luo YB, Wang YR, Zhong B, et al. Fatigue life prediction of vortex reducer based on stress gradient. J Mech Des 2018, 141(3): doi: 10.1115/1.4042189.10.1115/1.4042189 ↗
34. Multiaxial fatigue life prediction for powder metallurgy superalloy FGH96 based on stress gradient effect10.1016/j.ijfatigue.2017.12.006 ↗
35. A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime10.1111/j.1460-2695.2007.01122.x ↗
36. Additional cyclic strain hardening and its relation to material structure, mechanical characteristics, and lifetime10.1016/j.ijfatigue.2006.06.014 ↗
37. Prediction of fatigue lifetime under multiaxial cyclic loading using finite element analysis10.1016/j.matdes.2009.06.046 ↗
38. Multiaxial fatigue life prediction for titanium alloy TC4 under proportional and nonproportional loading10.1016/j.ijfatigue.2013.08.028 ↗
39. A critical distance/plane method to estimate finite life of notched components under variable amplitude uniaxial/multiaxial fatigue loading10.1016/j.ijfatigue.2011.11.015 ↗
40. Multiaxial fatigue life prediction for various metallic materials based on the critical plane approach10.1016/j.ijfatigue.2010.07.003 ↗
41. Analysis of the fatigue life estimators of the materials using small samples10.1177/0309324718782245 ↗
42. Reliability of fatigue strength curves for riveted connections using normal and Weibull distribution functions10.1061/AJRUA6.0001081 ↗
43. Stress- strain function for the fatigue of metals
44. A critical plane approach to multiaxial fatigue damage including out - of - phase loading10.1111/j.1460-2695.1988.tb01169.x ↗