In-situ DIC investigation on local stress-strain behavior in creep-fatigue test of dissimilar steel welded joint
Source abstract
Abstract
Abstract The digital image correlation technique was employed to investigate the variations of local stress–strain behavior in tensile and creep-fatigue tests for 9Cr/CrMoV welded joint. The strain concentration shifts from fine grain HAZ to over-tempered HAZ of CrMoV in tensile test. For strain-controlled creep-fatigue test, different ratcheting of sub-regions is observed, which is attributed to mismatched yielding and negative mean stress caused by stress relaxation. In addition, crack initiates and propagates at fine grain HAZ with characteristics of fatigue-dominated damage, where the actual strain amplitude and hysteresis energy density are about 4 and 10 times of base steel respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Optimization of the heat treatment for steam and gas turbine parts manufactured from 9–12% Cr steels10.1016/S0924-0136(97)00421-4 ↗
2. Development of thermal fatigue damage in 1CrMoV rotor steel10.1016/j.nucengdes.2007.05.002 ↗
3. Microstructure characteristics and temperature-dependent high cycle fatigue behavior of advanced 9% Cr/CrMoV dissimilarly welded joint10.1016/j.msea.2014.07.067 ↗
4. Soft zone formation by carbon migration and its effect on the high-cycle fatigue in 9% Cr–CrMoV dissimilar welded joint10.1016/j.matlet.2014.08.158 ↗
5. Role of butter layer in low-cycle fatigue behavior of modified 9Cr and CrMoV dissimilar rotor welded joint10.1016/j.matdes.2014.02.022 ↗
6. Transition and fracture shift behavior in LCF test of dissimilar welded joint at elevated temperature10.1016/j.jmst.2017.06.015 ↗
7. Dwell effects on high temperature fatigue behavior: Part I10.1016/S0261-3069(00)00060-1 ↗
8. Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part III: Lifetime prediction10.1016/j.ijfatigue.2008.02.006 ↗
9. Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part I: Effect of tensile holding period on fatigue lifetime10.1016/j.ijfatigue.2007.05.007 ↗
10. Creep-fatigue-oxidation interactions in a 9Cr–1Mo martensitic steel. Part II: Effect of compressive holding period on fatigue lifetime10.1016/j.ijfatigue.2007.05.008 ↗
11. Creep–fatigue-oxidation interaction in Grade 91 steel weld joints for high temperature applications10.1016/j.msea.2011.07.046 ↗
12. Understanding low cycle fatigue and creep–fatigue interaction behavior of 316 L(N) stainless steel weld joint10.1016/j.ijfatigue.2015.09.003 ↗
13. High-temperature low-cycle fatigue behavior of a 9Cr-ODS steel: Part 2 - hold time influence, microstructural evolution and damage characteristics10.1016/j.msea.2018.05.107 ↗
14. Fatigue–creep behavior of 1.25Cr0.5Mo steel at high temperature and its life prediction10.1016/j.ijfatigue.2006.07.008 ↗
15. Effect of cyclic softening and stress relaxation on fatigue behavior of 2.25Cr1Mo0.25V steel under strain-controlled fatigue-creep interaction at 728 K10.1016/j.ijfatigue.2020.105848 ↗
16. Failure competition behavior of 9Cr/617 dissimilar welded joint during LCF test at elevated temperature10.1016/j.msea.2019.138810 ↗
17. Microstructural characteristics and low cycle fatigue properties at 230 °C of different weld zone materials from a 100 mm thick dissimilar weld of ultra-supercritical rotor steel10.1016/j.ijfatigue.2019.105248 ↗
18. Comparative evaluation of LCF behavior of dissimilar steels and welds in an ultra-supercritical turbine rotor at 280 °C10.1016/j.ijfatigue.2020.105771 ↗
19. Experimental and numerical characterization of low cycle fatigue and creep fatigue behaviour of P92 steel welded joint10.1111/ffe.12722 ↗
20. Effect of change in microstructures due to simulation temperatures on the low cycle fatigue behavior of P91 steel10.1016/j.ijfatigue.2020.105847 ↗
21. A comparative study on the cyclic plasticity and fatigue failure behavior of different subzones in CrNiMoV steel welded joint10.1016/j.ijmecsci.2018.10.026 ↗
22. Low cycle fatigue testing using miniature specimens10.1016/j.ijfatigue.2020.105636 ↗
23. Applications of digital-image-correlation techniques to experimental mechanics10.1007/BF02325092 ↗
24. Heterogeneous creep deformation in Dissimilar Metal Welds (DMWs)10.1016/j.msea.2019.01.075 ↗
25. High-temperature deformation measurements using digital-image correlation10.1007/BF02328699 ↗
26. Early detection of crack initiation sites in TiAl alloys during low-cycle fatigue at high temperatures utilizing digital image correlation10.3139/146.110064 ↗
27. Macroscopic and microscopic characterizations of Portevin-LeChatelier effect in austenitic stainless steel using high-temperature digital image correlation analysis10.1016/j.actamat.2020.116560 ↗
28. High temperature fatigue of welded joints—experimental investigation and local analysis of butt welded flat and cruciform specimens10.1115/1.4036140 ↗
29. Thermo-mechanical fatigue behaviour of welded tubular parts made of ferritic stainless steel10.1016/j.ijfatigue.2013.04.004 ↗
30. Experimental investigation on the heterogeneous ratchetting of SUS301L stainless steel butt weld joint during uniaxial cyclic loading10.1016/j.ijfatigue.2017.08.027 ↗
31. Clarification of creep deformation mechanism in heat-affected zone of 9Cr steels with In Situ experiments10.1016/j.scriptamat.2020.113640 ↗
32. Characterization of high-gradient welded microstructure and its failure mode in fatigue test10.1016/j.ijfatigue.2018.03.029 ↗
33. Isothermal low-cycle fatigue and fatigue-creep of a 42CrMo4 steel10.1016/j.ijfatigue.2020.105538 ↗
34. Mechanism-based strain gradient plasticity - I. Theory10.1016/S0022-5096(98)00103-3 ↗
35. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
36. Dislocation density and sub-grain size evolution of 2CrMoNiWV during low cycle fatigue at elevated temperatures10.1016/j.actamat.2011.12.031 ↗
37. A strain energy density method for the prediction of creep–fatigue damage in high temperature components10.1016/j.msea.2009.11.028 ↗
38. Evaluation of creep–fatigue life based on fracture energy for modified 9Cr–1Mo steel10.1016/j.msea.2012.10.029 ↗