On the effect of internal friction on torsional and axial cyclic loading
Source abstract
Abstract
Abstract Failure of materials subjected to torsional and axial cyclic loading is studied by applying the principles of thermodynamics of dissipative processes. Extensive experimental tests are conducted using stainless steel (SS) 304 and SS316 materials to gain insight into both torsional and tension–compression fatigue life. It is shown that the higher magnitude of dissipated energy in torsional loading, as reported in many studies, is due to the anelastic deformation in the material and its associated internal friction. It is further shown that proper assessment of the damaging dissipation energy requires one to exclude the non-damaging internal friction from the total amount of energy dissipation. Accumulation of thermodynamic entropy generation as an index parameter using the modified dissipated energy is estimated to predict the fatigue life. The experimental results are found to be in good agreement with the proposed fatigue life prediction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. A failure analysis of concrete composites incorporating fly ash during torsional loading10.1016/j.compstruct.2017.05.073 ↗
2. Thermodynamic analysis of fatigue failure in a composite laminate10.1016/j.mechmat.2011.12.003 ↗
3. A study of mode III fracture toughness in young and mature concrete with fly ash additive
4. Biaxial cyclic high-strain fatigue of aluminum alloy RR5810.1243/03093247V083209 ↗
5. Biaxial Fatigue Tests on Thin Walled Tubes of NiCr23Col2Mo (Inconel 617) at 950° C
6. A new approach to the evaluation of fatigue under multiaxial loadings10.1115/1.3224982 ↗
7. Development of a biaxial fatigue testing rig10.1243/03093247V101001 ↗
8. Manson, S. and G. Halford, Discussion:“Multiaxial Low-Cycle Fatigue of Type 304 Stainless Steel”(Blass, JJ, and Zamrik, SY, 1976 Winter Annual Meeting). journal of Engineering Materials and Technology, 1977. 99(3): p. 283-285.10.1115/1.3443540 ↗
9. Fracture Modes and Low Cycle Biaxial Fatigue at Elevated Temperature: Transactions of ASME
10. High strain biaxial fatigue of a structural steel10.1111/j.1460-2695.1994.tb00798.x ↗
11. Multiaxial low-cycle fatigue of type 304 stainless steel
12. A theory for the effect of mean stress on fatigue of metals under combined torsion and axial load or bending10.1115/1.4008327 ↗
13. A fatigue crack initiation and growth life estimation method in single-bolted connections10.1177/0309324719829274 ↗
14. A theory for fatigue failure under multiaxial stress-strain conditions10.1243/PIME_PROC_1973_187_161_02 ↗
15. Jordan, E.H., M.W. Brown, and K.J. Miller, Fatigue under severe nonproportional loading, in Multiaxial fatigue. 1985, ASTM International.10.1520/STP36243S ↗
16. Plastic strain energy in fatigue failure10.1115/1.3264362 ↗
17. Multiaxial fatigue damage models10.1115/1.3225980 ↗
18. A multiaxial fatigue strain energy density parameter related to the critical fracture plane10.1111/j.1460-2695.1995.tb00140.x ↗
19. Liu · 1993
20. Fatigue behavior under multiaxial loading in the presence of a notch: methodologies for the prediction of life to crack initiation and life spent in crack propagation (shoulder fillet, plastic strain
21. Chu · 1993
22. Low-cycle multiaxial fatigue behaviour and fatigue life prediction for CuZn37 brass using the stress-strain models10.1016/j.ijfatigue.2017.04.011 ↗
23. Fatigue analysis under variable amplitude loading using an energy parameter10.1016/S0142-1123(02)00169-X ↗
24. Evaluation of low-cycle fatigue strength of structural metals
25. Evaluating a strain energy fatigue method using cyclic plasticity models10.1111/j.1460-2695.2010.01463.x ↗
26. Evaluation of multiaxial fatigue criteria under irregular loading10.1016/S0142-1123(02)00013-0 ↗
27. Rapid determination of fatigue failure based on temperature evolution: Fully reversed bending load10.1016/j.ijfatigue.2009.07.015 ↗
28. Thermoelasticity for the evaluation of fatigue behavior of 7005/Al2O3/10p metal matrix composite sheets joined by FSW10.1016/j.ijfatigue.2007.01.021 ↗
29. Thermomechanical behaviour of metals in cyclic loading10.1007/BF00367821 ↗
30. Heat dissipation measurements in low stress cyclic loading of metallic materials: From internal friction to micro-plasticity10.1016/j.mechmat.2009.03.003 ↗
31. Research on high-cycle fatigue behavior of FV520B stainless steel based on intrinsic dissipation10.1016/j.matdes.2015.10.103 ↗
32. Cumulative damage evaluation in multiple cycle fatigue tests taking into account energy parameters10.1016/j.ijfatigue.2012.10.020 ↗
33. Caillard, D. and J.-L. Martin, Thermally activated mechanisms in crystal plasticity. 2003: Elsevier.
34. Slimani, A., P. Fleischmann, and R. Fougères, Dislocation dynamic in aluminium polycrystals during cyclic plasticity studied by acoustic emission. Journal de Physique. 3, 1992. 2(6): p. 933-945.
35. S-N curve characteristics and subsurface crack initiation behaviour in ultra-long life fatigue of a high carbon-chromium bearing steel10.1046/j.1460-2695.2001.00459.x ↗
36. Mechanism of fatigue failure in ultralong life regime10.1046/j.1460-2695.2002.00576.x ↗
37. There is no infinite fatigue life in metallic materials10.1046/j.1460-2695.1999.00183.x ↗
38. An energy method for rapid evaluation of high-cycle fatigue parameters based on intrinsic dissipation10.1016/j.ijfatigue.2015.04.016 ↗
39. On the role of internal friction in low-and high-cycle fatigue10.1016/j.ijfatigue.2018.05.007 ↗
40. On the evaluation of fracture fatigue entropy10.1016/j.tafmec.2018.05.013 ↗
41. Fatigue resistant silicon nitride ceramics due to anelastic deformation and energy dissipation10.1016/S0925-8388(00)00999-3 ↗
42. A simple approach for predicting fatigue crack propagation rate based on thermography10.1016/j.tafmec.2020.102534 ↗
43. On the role of internal friction in low-and high-cycle fatigue10.1016/j.ijfatigue.2018.05.007 ↗
44. On the application of fracture fatigue entropy to variable frequency and loading amplitude10.1016/j.tafmec.2018.09.005 ↗
45. Modulus of Elasticity and Damping as a Function of the Material State
46. Internal friction in solids10.1088/0959-5309/52/1/322 ↗
47. Thermal shock behaviour of a coarse grain porous alumina10.1007/BF00356636 ↗
48. Extending the validity of lumped capacitance method for large Biot number in thermal storage application10.1016/j.solener.2012.03.016 ↗
49. Lemaitre · 1990
50. The energy required for fatigue(Plastic strain hystersis energy required for fatigue in ferrous and nonferrous metals)
51. An irreversible thermodynamics theory for damage mechanics of solids10.1177/1056789504041058 ↗
52. Rapid estimation of fatigue entropy and toughness in metals10.1016/j.matdes.2014.04.086 ↗
53. On the entropy of fatigue crack propagation10.1016/j.ijfatigue.2019.105413 ↗
54. Low Cycle Fatigue Life Prediction Using Unified Mechanics Theory in Ti-6Al-4V Alloys10.3390/e22010024 ↗
55. Computational damage mechanics of electromigration and thermomigration10.1063/1.4821015 ↗
56. Assessment of low cycle fatigue life of steam turbine rotor based on a thermodynamic approach10.1115/1.4006004 ↗
57. A thermodynamic entropy approach to reliability assessment with applications to corrosion fatigue10.3390/e17106995 ↗
58. Mechanothermodynamic entropy and analysis of damage state of complex systems10.3390/e18070268 ↗
59. An Entropy Based Low-Cycle Fatigue Life Prediction Model for Solder Materials10.3390/e19100503 ↗
60. Nondestructive estimation of remaining fatigue life without the loading history10.1177/1056789519860242 ↗
61. Online monitoring of metal fatigue life
62. Non-destructive testing and fatigue life prediction at different environmental temperatures10.1016/j.infrared.2018.11.020 ↗
63. Temperature-induced buckling of ductile metals during cyclic loading and the subsequent early fracture10.1016/j.ijmecsci.2020.105525 ↗
64. Ellyin, F., Fatigue damage, crack growth and life prediction. 2012: Springer Science & Business Media.
65. Analysis of the fatigue strength of a stainless steel based on the energy dissipation10.1016/j.ijfatigue.2006.02.043 ↗
66. Quantitative Thermographic Methodology for fatigue assessment and stress measurement10.1016/j.ijfatigue.2010.07.004 ↗
67. The influence of PVD coating on the low cycle fatigue behaviour of Cr-Mo-V steel at elevated temperatures10.1016/j.surfcoat.2017.05.008 ↗
68. Low-cycle fatigue under out-of-phase loading conditions10.1115/1.3443523 ↗
69. Taira, S., T. Inoue, and M. Takahashi. Low cycle fatigue under multiaxial stresses (in the case of combined cyclic tension-compression and cyclic torsion in the same phase at elevated temperature). in Proceedings of the 10th Japan Congress on Testing Materials. 1967.
70. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
71. Socie, D.F., L.A. Waill, and D.F. Dittmer, Biaxial fatigue of Inconel 718 including mean stress effects, in Multiaxial fatigue. 1985, ASTM International.10.1520/STP36238S ↗
72. Low cycle fatigue of steels under biaxial straining10.1243/03093247V022117 ↗
73. High temperature low cycle biaxial fatigue of two steels10.1111/j.1460-2695.1979.tb00379.x ↗
74. Fatigue strength of small-scale type 304 stainless steel thin films10.1016/j.msea.2006.03.090 ↗
75. The effect of mean stress on the fatigue behavior of 316 LN stainless steel in air and mercury10.1016/S0022-3115(03)00121-1 ↗
76. Low cycle fatigue of thin-walled hollow cylindrical specimens of mild steel in uni-axial and torsional tests at constant strain amplitude10.1007/BF00184149 ↗