Effects of pre-strain and annealing on the fatigue properties of complex phase steel CP800
Source abstract
Abstract
Abstract This work was to experimentally explore the fatigue properties under the conditions of pre-strain and annealing for CP800. Meanwhile, the elongation of grains caused by pre-strain and the increase content of bainite and martensite caused by annealing were observed by using optical microscopy (OM) and scanning electron microscopy (SEM), respectively. An effective pre-strain range was found to increase the yield and tensile strengths by dislocation strengthening. Besides, the pre-strain presents a negative effect on fatigue life, while the fatigue life can be increased by annealing treatment. It is confirmed that the combined effect of the large pre-strain and annealing treatment leads to cyclic hardening fracture. Furthermore, two kinds of failure modes caused by surface defects and inclusions were revealed by using SEM. Eventually, the fatigue life can be well predicted with a model based on strain energy method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Effect of single tensile overload on fatigue crack growth behavior in DP780 dual phase steel10.1016/j.ijfatigue.2017.09.018 ↗
2. Fatigue behavior of AHSS lap shear and butt arc welds including the effect of periodic overloads and underloads10.1016/j.ijfatigue.2015.12.009 ↗
3. Deformation behavior of a high strength multiphase steel at macro- and micro-scales10.1016/j.msea.2014.05.068 ↗
4. Influence of pre-straining path on high cycle fatigue performance of DP 600 steel10.1016/j.ijfatigue.2019.05.017 ↗
5. Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements10.1016/j.matchar.2018.05.038 ↗
6. Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel10.1016/j.mechmat.2017.07.020 ↗
7. On the microstructure control of the bendability of advanced high strength steels10.1016/j.msea.2018.07.080 ↗
8. New developments of advanced high-strength steels for automotive applications10.1016/j.crhy.2018.11.004 ↗
9. Effect of alloying elements on microstructure and mechanical properties of hot rolled multiphase steels10.1179/174328105X47981 ↗
10. Damage mechanisms in multiphased steels with a bainitic matrix under various mechanical loading paths10.1016/j.promfg.2018.07.317 ↗
11. Hole expansion of dual-phase and complex-phase AHS steels-effect of edge conditions
12. The effects of property differences in multiphase sheet steels on local formability10.1016/j.msea.2015.12.035 ↗
13. Revealing the mechanical and microstructural performance of multiphase steels during tensile, forming and flanging operations10.1016/j.msea.2017.06.056 ↗
14. Improvement of low-cycle fatigue resistance in TWIP steel by regulating the grain size and distribution10.1016/j.actamat.2017.05.004 ↗
15. Very high cycle fatigue mechanism of carbide-free bainite/martensite steel micro-alloyed with Nb10.1016/j.msea.2009.08.024 ↗
16. Very high cycle fatigue behaviors of Mn-Si-Cr series Bainite/Martensite dual phase steels10.1016/j.matdes.2010.01.008 ↗
17. Study on Very High Cycle Fatigue Fracture of High Strength Steel with CFB/M Complex Microstructure
18. Effect of microstructure on the very high cycle fatigue behavior of a bainite/martensite multiphase steel10.1016/j.msea.2015.02.015 ↗
19. The significance of ultrafine film-like retained austenite in governing very high cycle fatigue behavior in an ultrahigh-strength MN–SI–Cr–C steel10.1016/j.msea.2015.07.095 ↗
20. The potential significance of microalloying with niobium in governing very high cycle fatigue behavior of bainite/martensite multiphase steels10.1016/j.msea.2015.10.044 ↗
21. High-cycle fatigue properties and damage mechanisms of pre-strained Fe-30Mn-0.9C twinning-induced plasticity steel10.1016/j.msea.2016.10.043 ↗
22. Relationship between fatigue limit and Vickers hardness in steels10.1016/j.msea.2011.01.040 ↗
23. Fatigue life of EN AW-2024 alloy accounting for creep pre-deformation at elevated temperature10.1016/j.ijfatigue.2017.06.037 ↗
24. The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel10.1016/j.ijfatigue.2007.06.002 ↗
25. The effects of pre-deformation on the subsequent fatigue behaviors of SUS 430 Stainless Steel in load-control10.1016/j.ijsolstr.2012.06.023 ↗
26. Effect of pre-deformation on the fatigue crack initiation life of X60 pipeline steel10.1016/j.ijpvp.2005.01.006 ↗
27. Prolonging fatigue life of a damaged steel by annealing10.1016/j.ijfatigue.2004.02.005 ↗
28. Influence of cryorolling and followed by annealing on high cycle fatigue behavior of ultrafine grained Al 2014 alloy10.1016/j.matchar.2017.02.003 ↗
29. Effect of heat treatment on the high cycle fatigue behaviour of S2205 duplex stainless steels
30. Enhanced fatigue properties of cast AZ80 Mg alloy processed by cyclic torsion and low-temperature annealing10.1016/j.msea.2017.04.061 ↗
31. E8/E8M-16a, Standard Test Methods for Tension Testing of Metallic Materials. ASTM International; 2016.
32. E466-15, Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials. ASTM International; 2015.
33. Effect of bainite morphology on mechanical properties of the mixed bainite-martensite microstructure in D6AC steel10.1016/S1005-0302(12)60065-6 ↗
34. Effects of pre-tension on fatigue behavior of rolled magnesium alloy
35. Energy-based approach to predict the fatigue life behavior of pre-strained Fe–18Mn TWIP steel
36. Microstructure and mechanical properties of Fe–0.2C–5Mn steel processed by ART-annealing10.1016/j.msea.2011.05.039 ↗
37. Effect of pre-deformation on the pre-corrosion multiaxial fatigue behaviors of 2024–T4 aluminum alloy10.1016/j.ijfatigue.2017.11.008 ↗
38. An asymmetric elastic–plastic analysis of the load-controlled rotating bending test and its application in the fatigue life estimation of wrought magnesium AZ31B10.1016/j.ijfatigue.2014.02.012 ↗