Anisotropic cyclic deformation behavior of extruded ZA81M magnesium alloy
Source abstract
Abstract
Abstract Anisotropic cyclic deformation behavior and fatigue life of extruded ZA81M magnesium alloy were investigated. The alloy showed a tilted basal texture towards extrusion direction, which resulted in the different cyclic deformation behavior along extrusion direction and transverse direction. The tilted basal texture made basal slip favorable along extrusion direction, thus leading to the decrease of twinning deformation during compression, which resulted in the less asymmetric hysteresis loops and the lower mean stress along extrusion direction. The fatigue life was longer for specimens along extrusion direction than for those along transverse direction. The difference in the deformation mode was considered to be one of the reasons for the superior fatigue property, aside from the alleviated detrimental effect from the tensile mean stress for specimens along extrusion direction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Tailoring texture and refining grain of magnesium alloy by differential speed extrusion process10.1016/j.msea.2014.06.045 ↗
2. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression10.1016/j.msea.2011.12.013 ↗
3. Investigation of fatigue anisotropy in an extruded magnesium alloy10.1016/j.ijfatigue.2013.01.006 ↗
4. Role of loading direction on cyclic behaviour characteristics of AM30 extrusion and its fatigue damage modelling10.1016/j.msea.2016.05.116 ↗
5. Role of twinning and slip in cyclic deformation of extruded Mg–3%Al–1%Zn alloys10.1016/j.scriptamat.2010.08.008 ↗
6. Effect of twinning, slip, and inclusions on the fatigue anisotropy of extrusion-textured AZ61 magnesium alloy10.1016/j.msea.2011.05.047 ↗
7. The effects of texture and extension twinning on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B10.1016/j.msea.2010.07.047 ↗
8. Fatigue properties of rolled magnesium alloy (AZ31) sheet: influence of specimen orientation10.1016/j.ijfatigue.2010.10.013 ↗
9. Influence of different extrusion processes on mechanical properties of magnesium alloy10.1016/j.jma.2014.10.001 ↗
10. Influence of an asymmetric shear deformation on microstructure evolution and mechanical behavior of AZ31 magnesium alloy sheet10.1016/j.msea.2013.10.045 ↗
11. A high strength and ductility Mg–Zn–Al–Cu–Mn magnesium alloy10.1016/j.matdes.2012.12.080 ↗
12. Hot deformation behavior and processing maps of as-cast Mg–8Zn–1Al–0.5Cu–0.5Mn alloy10.1016/S1003-6326(15)63957-7 ↗
13. Anisotropy of the fatigue behavior of extruded and rolled magnesium alloys10.1016/j.ijfatigue.2012.02.011 ↗
14. Grain size effects on dislocation and twinning mediated plasticity in magnesium10.1016/j.scriptamat.2015.09.008 ↗
15. Microstructure and mechanical properties of Mg–Al–Zn alloy sheet fabricated by cold extrusion10.1016/j.matlet.2008.05.045 ↗
16. Fatigue of ZK60 magnesium alloy under uniaxial loading10.1016/j.ijfatigue.2014.02.019 ↗
17. Effect of strain ratio and strain rate on low cycle fatigue behavior of AZ31 wrought magnesium alloy10.1016/j.msea.2009.04.051 ↗
18. A crystal plasticity theory for latent hardening by glide twinning through dislocation transmutation and twin accommodation effects10.1016/j.jmps.2009.12.004 ↗
19. Strain hardening of titanium: role of deformation twinning10.1016/S1359-6454(03)00239-8 ↗
20. Fatigue deformation characteristic of as-extruded AM30 magnesium alloy10.1016/j.matdes.2009.08.042 ↗
21. Unraveling cyclic deformation mechanisms of a rolled magnesium alloy using in situ neutron diffraction10.1016/j.actamat.2014.11.030 ↗
22. Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2007.10.030 ↗
23. Low cycle fatigue of an extruded Mg–3Nd–0.2Zn–0.5Zr magnesium alloy10.1016/j.matdes.2014.07.016 ↗
24. A study of fatigue damage development in extruded Mg–Gd–Y magnesium alloy10.1016/j.msea.2013.09.089 ↗
25. Effect of aging treatment on low-cycle fatigue behavior of extruded Mg–8Al–0.5Zn alloys10.1016/j.matdes.2012.05.015 ↗
26. Ellyin · 2012 · 85
27. Low-cycle fatigue characteristics of rolled Mg–3Al–1Zn alloy10.1016/j.ijfatigue.2010.05.002 ↗
28. Crack nucleation due to dislocation pile-ups at twin boundary–grain boundary intersections10.1016/j.msea.2015.02.048 ↗
29. High cycle fatigue behavior of extruded and double-aged Mg-6Zn-1Mn alloy10.1016/j.msea.2016.02.079 ↗
30. Enhanced very high cycle fatigue performance of extruded Mg–12Gd–3Y–0.5Zr magnesium alloy10.1016/j.msea.2010.12.092 ↗
31. The role of twinning–detwinning on fatigue fracture morphology of Mg–3%Al–1%Zn alloy10.1016/j.msea.2008.04.056 ↗
32. Fatigue damage development in pure polycrystalline magnesium under cyclic tension–compression loading10.1016/j.msea.2011.06.064 ↗
33. Relationship between fatigue crack initiation and activated twins in as-extruded pure magnesium10.1016/j.scriptamat.2013.08.006 ↗
34. Fatigue damage development in extruded Mg-3Al-Zn magnesium alloy10.1016/j.msea.2016.05.009 ↗
35. Effect of strain amplitude on tension–compression fatigue behavior of extruded Mg6Al1ZnA magnesium alloy10.1016/j.scriptamat.2010.01.052 ↗