Evaluation of magnesium weldment fatigue data using traction and notch stress methods
Source abstract
Abstract
Abstract Recent magnesium weldment fatigue test data (Karakas et al., 2008), which involve partial- and full-penetration butt welds, as well as non-load carrying fillet welds, have been analyzed using both traction structural stress and equivalent notch stress methods. Both methods were compared for their effectiveness in correlating the test data by incorporating fracture mechanics-based load ratio parameters and was successfully used in conjunction with the load ratio parameter. Furthermore, the equivalent traction stress parameter, once converted into an equivalent structural strain parameter, enables comparison between magnesium weldment test data with the master S-N curve scatter band adopted in ASME Div. 2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Fatigue of welded magnesium alloy joints10.2320/matertrans.45.419 ↗
2. Magnesium alloy applications in automative structures10.1007/s11837-008-0150-8 ↗
3. Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters10.1016/j.actamat.2008.09.011 ↗
4. Lap shear strength and fatigue life of friction stir spot welded AZ31 magnesium and 5754 aluminum alloys10.1016/j.msea.2012.07.019 ↗
5. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
6. Quantitative weld quality acceptance criteria: an enabler for structural lightweighting and additive manufacturing10.29391/2020.99.004 ↗
7. British Standards Institution. BS 7608:2014 Guide to fatigue design and assessment of steel products. British Standard Institution; 2014.
8. CEN. EN 1999: Design of aluminium structures. European Committee for Standardization; 2007.
9. American Society of Mechanical Engineers. ASME Boiler and Pressure Vessel Code, Section VIII, Division 2. American Society of Mechanical Engineers; 2007.
10. Fatigue characterization and modeling of friction stir spot welds in magnesium AZ31 alloy10.1115/1.4002330 ↗
11. Microstructure and mechanical properties of fiber-laser-welded and diode-laser-welded AZ31 magnesium alloy10.1007/s11661-010-0574-y ↗
12. Comparison of fatigue behavior in Mg/Mg similar and Mg/steel dissimilar refill friction stir spot welds10.1016/j.ijfatigue.2016.06.033 ↗
13. Fatigue design of welded joints from the wrought magnesium alloy AZ31 by the local stress concept with the fictitious notch radii of rf = 1.0 and 0.05 mm10.1016/j.ijfatigue.2008.05.017 ↗
14. Gurney · 1979
15. The new IIW recommendations for fatigue assessment of welded joints and components - A comprehensive code recently updated10.1016/j.ijfatigue.2008.04.002 ↗
16. Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of rf=1 mm10.1016/j.ijfatigue.2005.10.006 ↗
17. Fatigue assessment of welded joints by local approaches
18. A consideration of allowable equivalent stresses for fatigue design of welded joints according to the notch stress concept with the reference radii rref = 1.00 and 0.05 mm. Weld
19. A structural stress definition and numerical implementation for fatigue analysis of welded joints10.1016/S0142-1123(01)00055-X ↗
20. A robust structural stress method for fatigue analysis of offshore/marine structures10.1115/1.1854698 ↗
21. Dong P, Hong JK, Osage DA, Dewees DJ, Prager M. The master S-N curve method an implementataion for fatigue evaluation of welded components in the ASME B&PV code, Section VIII, Division 2 and API 579-1/ASME FFS-1. Weld Research Council Bulletin; 2010; 523.
22. A structural strain method for low-cycle fatigue evaluation of welded components10.1016/j.ijpvp.2014.03.003 ↗
23. A structural strain parameter for a unified treatment of fatigue behaviors of welded components10.1016/j.ijfatigue.2019.03.010 ↗
24. Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber’s effective stress method10.1016/j.ijfatigue.2018.03.004 ↗
25. Taylor · 2007
26. The fatigue limit prediction of notched components – A critical review and modified stress gradient based approach10.1016/j.ijfatigue.2020.105531 ↗
27. Fatigue design values for welded joints of the wrought magnesium alloy AZ31 (ISO-MgAl3Zn1) according to the nominal, structural and notch stress concepts in comparison to welded steel and aluminium connections10.1007/BF03266643 ↗
28. Consideration of mean-stress effects on fatigue life of welded magnesium joints by the application of the Smith-Watson-Topper and reference radius concepts10.1016/j.ijfatigue.2012.11.007 ↗
29. Application of Neuber’s effective stress method for the evaluation of the fatigue behaviour of magnesium welds10.1016/j.ijfatigue.2016.10.023 ↗
30. A quantitative weld sizing criterion for fatigue design of load-carrying fillet-welded connections10.1016/j.ijfatigue.2017.01.003 ↗
31. Traction structural stress analysis of fatigue behaviors of rib-to-deck joints in orthotropic bridge deck10.1016/j.ijfatigue.2019.03.038 ↗
32. DNV-RP-C203 Fatigue design of offshore steel structures. Det Norske
33. Reduction of overwelding and distortion for naval surface combatants. Part 1: Optimized weld sizing for lightweight ship structures10.5957/jspd.2014.30.4.184 ↗
34. An analytical SCF solution method for joint misalignments and application in fatigue test data interpretation10.1016/j.marstruc.2016.07.006 ↗
35. Analytical treatment of distortion effects on fatigue behaviors of lightweight shipboard structures10.1016/j.ijfatigue.2019.105286 ↗
36. A new (_K+ Kmax) 0.5 driving force parameter for crack growth in aluminum alloys10.1016/S0142-1123(01)00023-8 ↗
37. Stresses and stress intensities at notches: “Anomalous crack growth” revisited10.1016/S0142-1123(03)00130-0 ↗
38. A fatigue strength evaluation method for load-carrying fillet welded cruciform joints10.1016/j.ijfatigue.2005.10.004 ↗
39. A study on fatigue crack initiation point of load-carrying fillet welded cruciform joints10.1016/j.ijfatigue.2007.11.003 ↗