Effect of tensile overload on fatigue crack behavior of 2205 duplex stainless steel: Experiment and finite element simulation
Source abstract
Abstract
Abstract The effect of tensile overload on fatigue crack behaviors of 2205 duplex stainless steel has been studied by experimental and finite element methods (FEM). The residual stresses were measured by neutron diffraction technique and simulated by FEM. The results show that the fatigue crack propagation is obviously delayed due to larger residual plastic strain caused by overload. Both the magnitude and region of compressive residual stress increase correspondingly. The retardation region caused by overload is well characterized by the peak position difference of residual stress. The retardation region is closely related with the overload ratio, overload position and load ratio.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Thermal aging at 475 °C of newly developed lean duplex stainless steel 2404: mechanical properties and corrosion behavior10.1016/j.corsci.2016.12.014 ↗
2. Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications10.1016/j.actamat.2014.12.012 ↗
3. Failure investigation of a centrifuge duplex stainless steel basket10.1016/j.engfailanal.2011.07.008 ↗
4. The effect of single overloads in tension and compression on the fatigue crack propagation behaviour of short cracks10.1016/j.ijfatigue.2016.02.001 ↗
5. Crack retardation mechanism due to overload in base material and laser welds of Al alloys10.1016/j.ijfatigue.2011.07.010 ↗
6. Delamination and fatigue crack growth behavior in Fiber Metal Laminates (Glare) under single overloads10.1016/j.ijfatigue.2015.04.002 ↗
7. A numerical study of the effect of single overloads on plasticity induced crack closure10.1016/j.tafmec.2016.12.001 ↗
8. Effect of crack closure on non-linear crack tip parameters10.1016/j.ijfatigue.2014.10.001 ↗
9. The significance of fatigue crack closure
10. Prediction of crack growth under complex loading cycles10.1016/0142-1123(94)90452-9 ↗
11. Synergy of crack closure, near-tip residual stress and crack-tip blunting in crack growth under periodic overloads-A fractographic study10.1016/j.ijfatigue.2016.08.004 ↗
12. The evolution of crack-tip stresses during a fatigue overload event10.1016/j.actamat.2010.03.013 ↗
13. Measuring overload effects during fatigue crack growth in bainitic steel by synchrotron X-ray diffraction10.1016/j.ijfatigue.2014.03.015 ↗
14. Spectrum loading and crack growth
15. Willenborg · 1971
16. Prediction of crack growth in 350WT steel subjected to constant amplitude with over-and under-loads using a modified wheeler approach10.1016/j.marstruc.2003.10.001 ↗
17. An engineering model of fatigue crack growth under variable amplitude loading10.1016/j.ijfatigue.2007.03.004 ↗
18. A material sensitive modified wheeler model for predicting the retardation in fatigue response of AM60B due to an overload10.1016/j.ijfatigue.2013.06.022 ↗
19. Overload effects in fatigue crack growth by crack-tip blunting10.1016/j.ijfatigue.2005.06.003 ↗
20. Effects of surface deformation and crack closure on fatigue crack propagation after overloading and underloading10.1016/j.ijfatigue.2004.03.017 ↗
21. Neutron diffraction measurements of residual stresses around a crack tip developed under variable-amplitude fatigue loadings10.1111/j.1460-2695.2010.01490.x ↗
22. A study of overload effect on fatigue crack propagation using EBSD FIB-DIC and FEM methods10.1016/j.engfracmech.2016.04.034 ↗
23. Experimental evaluation of shielding effect on growing fatigue cracks under overloads using ESPI10.1016/j.ijfatigue.2015.10.003 ↗
24. Crack tip strain evolution and crack closure during overload of a growing fatigue crack10.3221/IGF-ESIS.41.20 ↗
25. Evaluation of the overload effect on fatigue crack growth with the help of synchrotron XRD strain mapping10.1016/j.engfracmech.2010.08.018 ↗
26. A study on fatigue crack growth behavior subjected to a single tensile overload: Part II. Transfer of stress concentration and its role in overload-induced transient crack growth10.1016/j.actamat.2010.09.048 ↗
27. A study on fatigue crack growth behavior subjected to a single tensile overload: Part I. An overload-induced transient crack growth micromechanism10.1016/j.actamat.2010.09.049 ↗
28. Neutron diffraction residual stress analysis during fatigue crack growth retardation of stainless steel10.1016/j.ijfatigue.2017.08.007 ↗
29. A. International · 2011
30. R. Pynn, Neutron scattering-a non-destructive microscope for seeing inside matter; 2009.10.1007/978-0-387-09416-8_2 ↗
31. Revealing the cyclic hardening mechanism of an austenitic stainless steel by real-time in situ neutron diffraction10.1016/j.scriptamat.2014.06.021 ↗
32. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
33. Fracture toughness of a welded duplex stainless steel10.1016/j.engfracmech.2005.03.009 ↗
34. DIC-based studies of the overloading effects on the fatigue crack propagation behavior of Ti-6Al-4V ELI alloy10.1016/j.ijfatigue.2018.03.017 ↗
35. Size effects on residual stress and fatigue crack growth in friction stir welded 2195–T8 aluminium-Part II: Modelling10.1016/j.ijfatigue.2011.05.008 ↗
36. Computation of residual stress intensity factors induced by single overload during fatigue crack growth
37. G. Irwin, Plastic zone near a crack and fracture toughness, 1997.
38. Crack opening displacement and the rate of fatigue crack growth10.1007/BF00703882 ↗
39. Corrosion fatigue crack propagation of a duplex stainless steel X6 Cr Ni Mo Cu 25-6 in air and in artificial sea water10.1016/S0142-1123(02)00046-4 ↗
40. Fatigue crack propagation under biaxial fatigue loading with single overloads10.1016/j.ijfatigue.2017.12.018 ↗
41. Technology, Numerical and experimental study on the optimization of overload parameters for the increase of fatigue life10.1016/j.ast.2014.03.002 ↗
42. Texture, residual stresses and mechanical properties analysis in the commercial 1.4462 duplex stainless steel subjected to hydrostatic extrusion10.1016/j.acme.2018.12.008 ↗
43. Characterization on stress-strain behavior of ferrite and austenite in a 2205 duplex stainless steel based on nanoindentation and finite element method
44. Fatigue crack growth in a laser shock peened residual stress field10.1016/j.ijfatigue.2019.01.020 ↗
45. Separating plasticity-induced closure and residual stress contributions to fatigue crack retardation following an overload10.1016/j.jmps.2016.10.001 ↗
46. The overload effect on the crack-tip cyclic plastic deformation response in SA333 Gr 6 C-Mn steel10.1016/j.tafmec.2018.11.004 ↗