Investigation on impact damage evolution under fatigue load and shear-after-impact-fatigue (SAIF) behaviors of stiffened composite panels
Source abstract
Abstract
Abstract Experimental investigation on impact damage evolution under fatigue load and shear-after-impact-fatigue (SAIF) behaviors of stiffened composite panels were conducted in this paper. BVID was introduced into stiffened composite panels at a typical position. Damage areas, in-plane dimensions, dent depths were measured and relationships among the three parameters were determined by plane surface function. All fatigue specimens survived after 10 6 cycles at the given fatigue load level and the impact damage did not deteriorate or enlarge during fatigue loading. Then SAI (shear-after-impact) and SAIF experiments were conducted with a comparison of shear on virgin specimens. Buckling/failure modes of virgin, impact and impact-fatigue specimens were obtained. Buckling/failure load of impact specimens decreased by 17% and 16% compared to that of virgin specimens respectively. Additionally, fatigue load led a further 4.3% and 6.6% drop in buckling/failure load of impact-fatigue specimens compared to that of pure-impact specimens, although the impact damage area did not deteriorate or enlarge during and after the fatigue treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Investigation on tension-tension fatigue performances and reliability fatigue life of T700/MTM46 composite laminates10.1016/j.compstruct.2015.09.057 ↗
2. On the validation of a damage mesomodel for laminated composites by means of open-hole tensile tests on quasi-isotropic laminates10.1016/j.compositesa.2011.07.004 ↗
3. Durability of CFRP laminates under thermomechnical loading: a micro-meso damage model10.1016/j.compscitech.2005.07.031 ↗
4. Effect of hygrothermal condition on buckling and post-buckling performance of CCF300/5228A aero composite stiffened panel under axial compression10.1177/0731684415585381 ↗
5. Yi · 2013
6. Investigations on buckling behaviour of laminated curved composite stiffened panels10.1007/s10443-013-9337-4 ↗
7. Experimental and numerical analysis for the post-buckling behavior of stiffened composite panels with impact damage10.1016/j.compstruct.2015.08.019 ↗
8. Inter-laminar and intra-laminar damage evolution in composite panels with skin-stringer debonding under compression10.1016/j.compositesb.2016.03.058 ↗
9. Experiment and analysis of hat-stringer-stiffened composite curved panels under axial compression10.1016/j.compstruct.2014.11.074 ↗
10. Effect of the stiffener stiffness on the buckling and post-buckling behavior of stiffened composite panels – experimental investigation10.1016/j.compstruct.2014.10.021 ↗
11. COCOMAT-improved material exploitation of composite airframe structures by accurate simulation of postbuckling and collapse10.1016/j.compstruct.2005.11.042 ↗
12. POSICOSS-improved postbuckling simulation for design of fibre composite stiffened fuselage structures10.1016/j.compstruct.2005.11.041 ↗
13. Buckling measurement and numerical analysis of M-type ribs stiffened composite panel10.1016/j.tws.2014.08.008 ↗
14. Postbuckling strengths of composite laminate with various shaped cutouts under in-plane shear10.1016/j.compstruct.2010.05.008 ↗
15. Post-buckling analysis of composite plates under combined compression and shear loading using finite strip method10.1016/j.finel.2014.01.002 ↗
16. Optical measurement on dynamic buckling behavior of stiffened composite panels under in-plane shear10.1016/j.optlaseng.2016.04.017 ↗
17. Buckling of laminated composite stiffened panels subjected to in-plane shear: a parametric study10.1016/j.tws.2006.03.008 ↗
18. Buckling load prediction of laminated composites stiffened panels subjected to in-plane shear using artificial neural networks10.1016/j.tws.2016.01.025 ↗
19. Damage mechanism characterization in composite damage tolerance investigations10.1016/0263-8223(93)90015-I ↗
20. Micromodel-based simulations for laminated composites10.1016/j.compscitech.2008.09.041 ↗
21. Violeau D, Ladevèze P, Lubineau G. Micromodel-based simulations for laminated composites. Special Issue on the 12th European Conference on Composite Materials, ECCM 2006, 69: 1364–71.10.1016/j.compscitech.2008.09.041 ↗
22. Towards a bridge between the micro- and mesomechanics of delamination for laminated composites10.1016/j.compscitech.2004.12.026 ↗
23. A micro-meso computational strategy for the prediction of the damage and failure of laminates10.1016/j.compstruct.2012.05.028 ↗
24. Experimental investigation on edge impact damage and Compression-After-Impact (CAI) behavior of stiffened composite panels10.1016/j.compstruct.2015.11.060 ↗
25. Effect of impact damage positions on the buckling and post-buckling behaviors of stiffened composite panel10.1016/j.compstruct.2016.08.012 ↗
26. Study on corrosion damage distribution law of aircraft structure
27. Global behaviour of a composite stiffened panel in buckling. Part 2: Experimental investigation
28. Local buckling of composite beams with edge-stiffened flanges subjected to axial load10.1177/0731684415602072 ↗
29. Design and analysis of stiffened composite panels including postbuckling and collapse10.1016/j.compstruc.2007.04.022 ↗