Creep-fatigue damage simulation at multiple length scales for an aeroengine titanium alloy
Source abstract
Abstract
Abstract Aeroengine titanium alloys such as Ti-6Al-4V experience creep-fatigue loading conditions during the critical fighter aircraft operations. To ensure and enhance the reliable application of such alloys, mechanical behaviour across multiple length scales need renewed attention. Hence, in the present investigation, an attempt has been made to study creep-fatigue damage across multiple length scales (microstructure to component level) using damage mechanics methodology for Ti-6Al-4V alloy. This involves ambient creep, fatigue and creep-fatigue experimentation; identification of various parameters for creep and fatigue models; developing a creep-fatigue model and finally application of this model for damage simulation at specimen, component and microstructure levels. At specimen level, creep-fatigue damage has been obtained from simulations and compared with experimental values. A very good comparison has been observed for the applied maximum peak stress range of 925–975 MPa. The creep-fatigue model has also been successful in mapping damage and identifying critical damage locations in component as well as in the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions
2. Deformation and creep modeling in polycrystalline Ti-6Al alloys10.1016/S1359-6454(03)00289-1 ↗
3. An investigation of the effects of microstructure on dwell fatigue crack growth in Ti-624210.1016/j.msea.2005.05.097 ↗
4. A size-dependent crystal plasticity finite-element model for creep and load shedding in polycrystalline titanium alloys10.1016/j.actamat.2007.03.017 ↗
5. Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature10.1016/S0142-1123(97)00020-0 ↗
6. Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI-68510.1016/0142-1123(94)90194-5 ↗
7. Dieter · 1988
8. Application of damage concepts to predict creep-fatigue failures
9. Analysis on the fatigue damage evolution of notched specimens with consideration of cyclic plasticity10.1111/ffe.12299 ↗
10. A unified viscoplastic constitutive model with damage for multi-axial creep–fatigue loading10.1177/1056789514537007 ↗
11. The fatigue life prediction for structure with surface scratch considering cutting residual stress, initial plasticity damage and fatigue damage10.1016/j.ijfatigue.2015.01.011 ↗
12. Lemaitre · 1992
13. Analysis and modeling of thermal signatures for fatigue damage characterization in Ti–6Al–4V titanium alloy10.1007/s10921-015-0317-5 ↗
14. Creep–fatigue interactions in Ti-6Al-4V alloy at ambient temperature10.1007/s12666-015-0766-7 ↗
15. Micro-texture analysis and modeling of ambient fatigue and creep-fatigue damages in Ti-6Al-4V alloy
16. Observation of etch-pits and LAGB configurations during ambient creep of Ti-6Al-4V alloy10.1007/s11661-016-3443-5 ↗
17. Creep-fatigue damage modeling in Ti-6Al-4V alloy: a mechanistic approach10.1016/j.ijfatigue.2017.01.016 ↗
18. Modeling of anisotropic tensile and cyclic viscoplastic behaviour of a nickel-base directionally solidified superalloy10.1016/j.matdes.2013.10.085 ↗
19. Toward predictive understanding of fatigue crack nucleation in ni-based superalloys10.1007/s11837-017-2307-9 ↗
20. Comparison of experimental results and finite element simulation of strain localization scheme under cyclic loading10.1016/j.commatsci.2009.04.037 ↗
21. Numerical analysis on the local mechanical fields in polycrystalline 316ln stainless steel under cyclic fatigue loading: comparison with experimental results10.1016/j.msea.2017.04.023 ↗
22. A multiscale model for the elastoviscoplastic behaviour of directionally solidified alloys: application of FE structural computations10.1016/j.ijsolstr.2013.12.013 ↗
23. A Class of viscoplastic constitutive models based on the maximum dissipation principle10.1016/S0167-6636(00)00011-9 ↗
24. A Review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
25. Cyclic inelastic constitutive equations and their impact on the fatigue life predictions10.1016/j.ijplas.2012.01.010 ↗
26. Structure Life prediction at high temperature: present and future capabilities10.1080/02619180.1987.11753344 ↗
27. Continuum damage mechanics: present state and future trends10.1016/0029-5493(87)90225-1 ↗
28. Simulation of elevated temperature fatigue damage evolution using the finite element method for near alpha titanium alloy10.1111/ffe.12247 ↗
29. Kattan · 2002
30. Pragmatic optimisation methods for determining material constants of viscoplasticity model from isothermal experimental data10.1179/1743284713Y.0000000277 ↗
31. Analysis of ultra low cycle fatigue problems with Barcelona plastic damage model and a new isotropic hardening law10.1016/j.ijfatigue.2014.11.013 ↗
32. User manual, Zebulon 8.4.2. www.nwnumerics.com.
33. Distinguishing the ambient temperature creep region in a deformation mechanism map of annealed CP-Ti10.1016/j.scriptamat.2005.08.045 ↗
34. Crystal plasticity modeling of deformation and creep in polycrystalline Ti-624210.1007/s11661-006-0082-2 ↗
35. Creep-fatigue calculations procedures for code case 1592
36. Development of generic creep-fatigue life prediction models10.1016/j.matdes.2003.11.001 ↗