Variation of local stress ratio and its effect on notch fatigue behavior of 2024-T4 aluminum alloy
Source abstract
Abstract
Abstract Fatigue tests and finite element analysis of notched specimen were carried out to investigate the variation of local stress ratio at notch root and its influence on fatigue strength. The S–N curve of 2024-T4 aluminum alloy was kinked at the critical nominal stress amplitude, above which the local stress ratio became low due to the development of local plastic deformation at notch root. The predicted fatigue lives based on linear fracture mechanics approach were in agreement with the experimental results below the critical nominal stress amplitude. The predicted fatigue lives based on the SWT parameter, where the variation of local stress ratio was taken into account, were in good agreement with the experimental results above the critical nominal stress amplitude.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Dowling · 1999
2. McEvily · 2002
3. Analysis of low cycle fatigue in AlMgSi aluminum alloys10.1016/j.engfailanal.2003.09.003 ↗
4. A modification of Morrow and Smith–Watson–Topper mean stress correction models10.1111/j.1460-2695.2011.01577.x ↗
5. Strain-controlled low-cycle fatigue properties of extruded 6061-T6 aluminum alloy10.1007/s11665-012-0411-0 ↗
6. Theory of stress concentration for shear strained prismatic bodies with arbitrary nonlinear stress strain law10.1115/1.3641780 ↗
7. Calculation of inelastic notch-tip strain-stress histories under cyclic loading10.1016/0013-7944(85)90112-2 ↗
8. Morrow J. Fatigue properties of metals. Section 3.2. Fatigue Design Handbook. Pub. No. AE-4. SAE. Warrendale. PA; 1968.
9. The effect of stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 aluminum
10. A stress-strain function for the fatigue of metals
11. On the Glinnka and Neuber methods for calculating notch tip strains under cyclic load spectra10.1016/S0142-1123(00)00061-X ↗
12. ASTM E606-92. Standard practice for strain-controlled fatigue testing; 1998.
13. Pilkey · 2007
14. ASTM E468-11. Standard practice for presentation of constant amplitude fatigue test results for metallic materials; 2001.
15. A method for obtaining and analyzing sensitivity data10.1080/01621459.1948.10483254 ↗
16. Suresh · 1998
17. Nachtigall · 1977
18. Mentat II Users Guide. Marc Analysis Research Corporation. USA; May 2013.
19. Notch effects in fatigue and fracture
20. Campbell · 2012
21. Grosskreutz JC, Shaw GG. Mechanisms of fatigue in 1100-0 and 2024-T4 aluminum. Air Force Material Report, Air Force Materials Laboratory, Research and Technology Division, Air Force Systems Command. AFML-TR-65-127; 1965.
22. Low cycle lifetime assessment of Al2024 alloy10.1016/j.ijfatigue.2010.01.014 ↗
23. A study of nucleation and fatigue behavior of an aerospace aluminum alloy 2024-T310.1016/j.ijfatigue.2004.06.010 ↗
24. Slip-band damage and extrusion
25. Estimation of cyclic strain hardening exponent and cyclic strength coefficient of steel by artificial neutral networks
26. Analysis of low cycle fatigue in AlMgSi aluminium alloys10.1016/j.engfailanal.2003.09.003 ↗
27. A study of the effects of cyclic thermal stresses on a ductile metal
28. Manson SS. Behavior of materials under conditions of thermal stress. NASA Report 1170, Supersedes NASA TN 2933; 1954.
29. Stephens · 2000
30. A critical analysis of crack propagation laws
31. Murakami · 1987 · Vol. 1 · 40
32. Merkle JG. A review of some of the existing stress-intensity factor solutions for part-through surface cracks, U.S. Atomic Energy Commission ORNL-TM-3983; 1973.
33. Fatigue crack propagation of short cracks10.1115/1.3443647 ↗
34. Stress ratio and notch effect on fatigue crack initiation and propagation in 2024 Al alloy