Fatigue behavior of 2618-T851 aluminum alloy under uniaxial and multiaxial loadings
Source abstract
Abstract
AA2618 aeronautical aluminum alloy has been largely used in the past, especially in well-known Concorde aircraft, developed during sixties decade. In more recent aircraft, this alloy has been largely replaced by others such as 7075 which present greater fatigue resistance. Forgotten for a time, AA2618 comes back in new aircrafts for structural parts submitted to fatigue loading at high temperature because of only a slight decrease of fatigue resistance of this alloy compared to room temperature fatigue resistance. In this paper, a complete fatigue characterization of 2618-T851 aluminum alloy is presented: fatigue tests under uniaxial tensile or torsion cyclic loadings, with mean tensile or shear stress have been realized; fatigue tests under combined tensile-torsion, in or out-of-phase have also been conducted as well as some combined tensile-torsion-internal pressure fatigue tests. All these tests covered 104–107 cycles range. At last, Crossland multiaxial fatigue criterion has been used and extended to median fatigue life domain to analyze these results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. The development of Hiduminium-RR58 aluminium alloy: the background to the choice of the main structural material for Concorde10.1108/eb034573 ↗
2. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
3. Romanowski · 1981
4. The structure of AlxFeNi phase in Al-cu-mg-Fe-Ni alloy ‘AA2618)
5. A study on the re-solution heat treatment of AA2618 aluminium alloy10.1016/j.matchar.2006.07.002 ↗
6. Influence of deformation ageing treatment on microstructure and properties of aluminium alloy 261810.1016/j.matchar.2007.08.007 ↗
7. Microstructure changes in 2618 aluminium alloy during ageing and creep10.1016/j.jallcom.2009.08.014 ↗
8. characterization of precipitation upon cooling of an AA2618 Al-Cu-Mg alloy10.1016/j.jallcom.2015.09.113 ↗
9. Lumm · 1966
10. Development of Hidunium-RR-58 structural aluminium alloy used on
11. Royster · 1969
12. Tensile deformation of 2618 and Al-Fe-Si-V aluminium alloy at elevated temperatures10.1016/0956-716X(90)90504-A ↗
13. Influence of microstructure on the quasistatic and low cycle fatigue behavior of an AA2618 aluminium alloy10.1016/j.proeng.2011.04.223 ↗
14. Creep behaviour and microstructural stability of al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys10.1016/S0921-5093(97)00240-2 ↗
15. Hot and warm forming of 2618 aluminium alloy10.1016/S1471-5317(03)00008-7 ↗
16. Anelastic creep behavior of RR-58 aluminium alloy at 180°c: phenomenological aspects and analysis based on the unbowing of dislocation segments10.1016/j.msea.2005.08.055 ↗
17. Effects of heat treatment on the microstructure and mechanical properties of AA2618 DC cast alloy10.1016/j.matdes.2014.04.045 ↗
18. Fatigue threshold in a 2618A aluminium alloy10.1111/j.1460-2695.1980.tb01110.x ↗
19. Influence of various parameters on the determination of the fatigue crack arrest threshold10.1111/j.1460-2695.1981.tb01371.x ↗
20. Fracture toughness and microstructure in AA 2xxx aluminium alloys
21. Low-cycle fatigue behavior of AA2618-T61 forged disk10.1016/j.matdes.2010.04.043 ↗
22. Indentification of modes of fracture in a 2618–T6 aluminium alloy using stereophotgrammetry10.1016/j.matchar.2011.09.005 ↗
23. Failure analysis in aluminium turbocharger wheels10.1016/j.engfailanal.2015.11.024 ↗
24. Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy10.1016/j.ijfatigue.2008.06.003 ↗
25. Influence of surface treatments on fatigue life of Al 7010 alloy10.1016/j.jmatprotec.2010.06.019 ↗
26. Effect of sealed anodic film on fatigue performance of 2214–T6 aluminium alloy10.1016/j.surfcoat.2011.10.033 ↗
27. A predictive fatigue life model for anodized 7050 aluminium alloy10.1016/j.ijfatigue.2012.11.002 ↗
28. Effect of mean shear stress on torsion fatigue failure behavior of 2A12-T4 aluminium alloy10.1016/j.ijfatigue.2013.11.012 ↗
29. On the consideration of normal and shear stress interaction in multiaxial fatigue damage analysis10.1016/j.ijfatigue.2017.03.042 ↗
30. Fatigue life of AlCu4Mg1 aluminium alloy under constant-amplitude in- and out-of-phase bending with torsion
31. Multiaxial fatigue behaviour of AA6068 and AA2017A aluminium alloys under in-phase bending with torsion loading condition
32. Fatigue crack propagation under in-phase and out-of-phase biaxial loading
33. Tension–torsion high-cycle fatigue failure analysis of 2A12-T4 aluminum alloy with different stress ratios10.1016/j.ijfatigue.2010.12.007 ↗
34. Determine the fatigue lifetime for aluminium alloy EN AW 2007.T3 during cyclic bending-torsion loading under in-and-out of phase shift φ = 0° and φ = 90° using selected fatigue criteria