Experimental study of the low-cycle fatigue life under multiaxial loading of aluminum alloy EN AW-2024-T3 at elevated temperatures
Source abstract
Abstract
Abstract This paper presents the results of an experimental study conducted on technical aluminum alloy EN AW-2024-T3 specimens under multiaxial low-cycle-fatigue loading at elevated temperatures. An original experimental setup, consisting of a biaxial servo-hydraulic MTS 858 MiniBionix material testing system, Maytec resistance furnace, high-temperature MTS extensometer and hydraulic grips of original design, was used in tests. Tubular specimens were subjected to multiaxial fatigue loading, proportional and non-proportional (with phase shift), under isothermal conditions of the air atmosphere. Multiaxial tests were performed under combined axial-torsional loading. Fractography analysis were conducted on the tested samples, and crack initiation mechanism under conditions of multiaxial loads at elevated temperatures were identified. Obtained fatigue life values were analyzed, particularly from the perspective of the possibility of approximating them by means of simple relations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Stress–strain behavior on tensile and low cycle fatigue tests of JLF-1 steel at elevated temperature in vacuum10.1016/j.fusengdes.2006.07.055 ↗
2. An online algorithm for temperature influenced fatigue–life estimation: strain–life approach10.1016/S0142-1123(03)00108-7 ↗
3. Comparison of prediction methods for low-cycle fatigue life of HIP superalloys at elevated temperatures for turbopump reliability10.1016/j.msea.2009.04.044 ↗
4. Damage accumulation modeling under uniaxial low cycle fatigue at elevated temperatures10.1016/j.engfailanal.2014.11.026 ↗
5. Monotonic and low cycle fatigue behaviour of 2024-T3 aluminium alloy between room temperature and 300°C for designing VAWT components10.1111/ffe.12336 ↗
6. Ultra-high-cycle fatigue properties and fracture mechanism of modified 2.25Cr–1Mo steel at elevated temperatures10.1016/j.ijfatigue.2005.08.016 ↗
7. A simple life prediction method for 304L stainless steel structures under fatigue-dominated thermo-mechanical fatigue loadings10.1016/j.msea.2011.09.045 ↗
8. Thermal fatigue strength of type 304 stainless steel in simulated BWR environment10.1016/S0029-5493(97)00372-5 ↗
9. Time-dependent fatigue damage model under uniaxial and multiaxial loading at elevated temperature10.1016/j.ijfatigue.2008.02.002 ↗
10. High-temperature fatigue property of Ti46Al8Nb alloy with the fully lamellar microstructure10.1016/j.intermet.2011.10.005 ↗
11. Effect of temperature on high cycle fatigue behavior in 18Cr–2Mo ferritic stainless steel10.1016/j.ijfatigue.2007.05.004 ↗
12. The influence of temperature on low cycle fatigue behavior of nickel base superalloy GH404910.1016/S0142-1123(99)00041-9 ↗
13. Fatigue behavior of deep rolled Al–Mg–Si–Cu alloy at elevated temperature10.1016/j.scriptamat.2006.07.030 ↗
14. A thermo-mechanical fatigue damage model for variable temperature and loading amplitude conditions10.1016/j.ijfatigue.2007.03.008 ↗
15. Effects of laser shock processing on 00Cr12 mechanical properties in the temperature range from 25°C to 600°C10.1016/j.apsusc.2010.09.002 ↗
16. Effect of temperature on cyclic deformation behavior and residual stress relaxation of deep rolled under-aged aluminium alloy AA611010.1016/j.msea.2006.10.074 ↗
17. Tension-compression fatigue behavior of a unidirectional titanium-matrix composite at elevated temperature10.1016/S0266-3538(96)00113-3 ↗
18. Fatigue behaviour of SiC-particulate-reinforced aluminium alloy composites with different particle sizes at elevated temperatures10.1016/j.compscitech.2008.06.005 ↗
19. 2011
20. The effects of temperature on the strength properties of aluminium alloy 2024-T3
21. The effects of out-of-phase biaxial-strain cycling on low-cycle fatigue10.1007/BF02322654 ↗
22. Nonproportional low cycle fatigue criterion for type 304 stainless steel10.1115/1.2804541 ↗
23. Local strain approach in non-proportional loading