On fatigue stress-cycle curves of carbon, glass and hybrid carbon/glass-reinforced fibre metal laminates
Source abstract
Abstract
Abstract In this paper, theoretical predictions of static and fatigue strength were performed and validated experimentally of conventional and carbon/glass fibres reinforced hybrid fibre metal laminates (FMLs). It was found, that the hybrid glass/carbon FMLs are featured by lower static but higher fatigue strength than glass reinforces laminates currently using in aircraft. The potential for fatigue resistance was proposed as a new comparable parameter describing global fatigue response of the laminates. It was theoretically predicted and experimentally confirmed that the fatigue degradation of laminates is governed by either composite failure or aluminium fatigue, depending on the loading magnitude.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Structure Analysis and Optimization · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Fatigue initiation in fibre metal laminates10.1016/j.ijfatigue.2005.07.030 ↗
2. Schijve J. Fatigue of structures and materials. Springer 2009. ISBN-13:978-1-4020-6807-2. DOI 10.1007/978-1-4020-6808-9.
3. Predicting fatigue crack initiation in fibre metal laminates based on metal fatigue test data10.1016/j.ijfatigue.2014.07.004 ↗
4. Fatigue crack growth behaviour of fibre-metal laminate GLARE-1 and metal Laminate 7475 with different blunt notches10.1111/j.1460-2695.1997.tb01512.x ↗
5. Fatigue crack initiation in fibre-metal laminate GLARE 210.1016/S0921-5093(97)00294-3 ↗
6. Alderliesten · 2017
7. On the available relevant approaches for fatigue crack propagation prediction in Glare10.1016/j.ijfatigue.2006.03.003 ↗
8. Analytical prediction model for fatigue crack propagation and delamination growth in Glare10.1016/j.ijfatigue.2006.07.006 ↗
9. Alderliesten RC. Fatigue crack propagation and delamination growth in GLARE. PhD dissertation. Delft: Delft University of Technology; 2005.
10. A generalized solution to the crack bridging problem of fiber metal laminates10.1016/j.engfracmech.2013.03.008 ↗
11. A theoretical model for predicting fatigue crack growth in fibre-reinforced metal laminates10.1046/j.1460-2695.1998.00076.x ↗
12. Bridging stress distribution in center-cracked fiber reinforced metal laminates: modelling and experiment10.1016/S0013-7944(99)00018-1 ↗
13. Fatigue crack growth properties of a GLARE3-5/4 fiber/metal laminate10.1016/S0013-7944(99)00021-1 ↗
14. Predicting the influence of discretely notched layers on fatigue crack growth in fibre metal laminates10.1016/j.engfracmech.2015.06.062 ↗
15. Crack paths in fibre metal laminates: Role of fibre bridging10.1016/j.engfracmech.2013.03.020 ↗
16. Modelling cyclic shear deformation of fibre/epoxy layers in fibre metal laminates10.1016/j.compscitech.2006.12.011 ↗
17. Application of the energy release rate approach for delamination growth in Glare10.1016/j.engfracmech.2005.10.006 ↗
18. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
19. Delamination in Fiber Metal Laminates (GLARE) during fatigue crack growth under variable amplitude loading10.1016/j.ijfatigue.2011.04.002 ↗
20. Application of a modified Wheeler model to predict fatigue crack growth in Fibre Metal Laminates under variable amplitude loading10.1016/j.engfracmech.2010.03.041 ↗
21. Delamination and fatigue crack growth behavior in Fiber Metal Laminates (Glare) under single overloads10.1016/j.ijfatigue.2015.04.002 ↗
22. An experimental study on fatigue characteristics of CFRP-steel hybrid laminates10.1016/j.matdes.2015.09.024 ↗
23. Fatigue damage in titanium-graphite hybrid laminates10.1016/S0266-3538(02)00027-1 ↗
24. Residual fatigue life of carbon fibre aluminium laminates10.1016/j.ijfatigue.2017.03.026 ↗
25. Isostrain elastoplastic model for prediction of static strength and fatigue life of fiber metal laminates10.1016/j.ijfatigue.2018.01.009 ↗
26. Off-axis fatigue behaviour and its damage mechanics modelling for unidirectional fibre–metal hybrid composite: GLARE 210.1016/S1359-835X(00)00135-4 ↗
27. A new function for fatigue curves characterization and its multiple merits10.1016/S0142-1123(00)00082-7 ↗
28. Jones · 1999
29. Fatigue of fiber-metal-laminates with aluminum core, CFRP face sheets and elastomer interlayers (FMEL)10.1016/j.ijfatigue.2017.10.017 ↗
30. Investigation of tensile and bending behavior of aluminum based hybrid fiber metal laminates10.1016/j.mspro.2014.07.242 ↗
31. On the effect of glass and carbon fiber hybridization in fiber metal laminates: Analytical, numerical and experimental investigation10.1016/j.compstruct.2019.03.051 ↗
32. Two-stress level fatigue of unidirectional fiber–metal hybrid composite: GLARE 210.1016/S0142-1123(01)00108-6 ↗
33. Dassault Systemes Simulia Corp. Abaqus 2017 documentation. Providenc (RI, USA); 2017.
34. On fracture locus in the equivalent strain and stress triaxiality space10.1016/j.ijmecsci.2004.02.006 ↗
35. The effect of transverse shear deformation on the bending of elastic plates10.1115/1.4009435 ↗
36. Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates10.1115/1.4010217 ↗
37. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
38. A fatigue criterion for fiber-reinforced materials10.1177/002199837300700404 ↗
39. Characterisation of fatigue crack growth and related damage mechanisms in FRP–metal hybrid laminates10.1016/j.compscitech.2007.11.013 ↗
40. Mandell JF, Samborsky DD, Cairns DS. Fatigue of composite materials and substructures for wind turbine blades. Report SAND02–0771. Albuquerque (New Mexico): Sandia National Laboratories; 2002.10.2172/793410 ↗
41. Mandell JF, Samborsky DD. DOE/MSU composite material fatigue database. Sandia National Laboratories, Version 19.0; 2010.
42. Bortolotti P. Carbon glass hybrid materials for wind turbine rotor blades. Master thesis. Delft University of Technology; 2012.
43. Numerical/phenomenological model for fatigue life prediction of hybrid laminates10.1063/1.5019055 ↗
44. Fatigue of composite materials: damage mechanisms and fatigue-life diagrams
45. Fatigue of hybrid glass/carbon composites: 3D computational studies10.1016/j.compscitech.2014.01.014 ↗
46. Fibre hybridisation in polymer composites: A review10.1016/j.compositesa.2014.08.027 ↗
47. A study on tensile properties of a novel fiber/metal laminates10.1016/j.msea.2010.04.028 ↗
48. Experimental and numerical investigation on the uni-axial tensile response and failure of fiber metal laminates10.1016/j.compositesb.2017.05.072 ↗
49. Sato T, Kawai M. Characterization and modelling of off-axis fatigue failure of notched fiber metal laminate Glare-3. In: Asian Pacific conference for materials and mechanics. Yokohama, Japan; 2009.
50. Delamination growth from face sheet seams in cross-ply titanium/graphite hybrid laminates10.1016/S0266-3538(00)00206-2 ↗