Finite element and experimental analysis of elevated-temperature fatigue behavior of IN718 alloy subjected to laser peening
Source abstract
Abstract
Abstract Elevated-temperature fatigue life prediction method on laser peening (LP) treated IN718 alloy was proposed by using ABAQUS and MSC.Patran software. The elevated-temperature fatigue tests were subsequently performed to investigate the effects of LP on the fatigue life of specimens. Finally, the functional relationship model between fatigue life of the whole specimen and risk nodes was proposed to predict the ultimate elevated-temperature fatigue life according to experimental results and finite element analysis. The results indicated that the IN718 alloy served at 700 ℃ exhibited outstanding comprehensive mechanical properties due to strengthening phase precipitation. At elevated temperature, the relaxation degree of LP-induced residual stress and the change of mechanical properties dominated the ultimate fatigue life. The predicted fatigue life results obtained by the proposed calculated model showed an acceptable error compared with experimental results. Both simulation and experimental results indicated that LP treatment is beneficial to the improvement of the elevated-temperature fatigue properties of IN718 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Deformation behavior of hot-rolled IN718 superalloy under plane strain compression at elevated temperature10.1016/j.msea.2014.03.075 ↗
2. Effects of warm laser peening on the elevated temperature tensile properties and fracture behavior of IN718 nickel-based superalloy10.1016/j.engfracmech.2016.11.016 ↗
3. Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation10.1016/j.ijfatigue.2009.01.023 ↗
4. Thermo-mechanical relaxation of compressive residual stresses induced by shot peening10.1016/j.prostr.2016.06.273 ↗
5. Characterization of surface layer in TC17 alloy treated by air blast shot peening10.1016/j.matdes.2014.09.019 ↗
6. Deep rolling effect on fatigue behavior of austenitic stainless steels10.1016/j.ijfatigue.2016.10.008 ↗
7. Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling10.1016/j.ijfatigue.2015.08.007 ↗
8. Improvement in fatigue life of Al 7475–T7351 alloy specimens by applying ultrasonic and microshot peening10.1016/j.ijfatigue.2016.06.022 ↗
9. Effect of surface nanostructure on tensile behavior of superalloy IN71810.1016/j.matdes.2014.04.084 ↗
10. Residual stresses of GH742 superalloy induced by laser peening and shot peening
11. Laser shock processing on Ni-based superalloy K417 and its effect on thermal relaxation of residual stress
12. Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth10.1016/j.actamat.2014.09.032 ↗
13. Effect of laser peening with different energies on fatigue fracture evolution of 6061-T6 aluminum alloy10.1016/j.optlastec.2015.09.008 ↗
14. Thermal relaxation of residual stress in laser shock peened Ti-6Al-4V alloy10.1016/j.surfcoat.2012.05.022 ↗
15. A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH416910.1016/j.matdes.2013.08.054 ↗
16. On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 °C10.1016/j.ijfatigue.2012.03.008 ↗
17. High temperature mechanical properties and surface fatigue behavior improving of steel alloy via laser shock peening10.1016/j.matdes.2013.07.009 ↗
18. The effects of laser shock peening scanning patterns on residual stress distribution and fatigue life of AA2024 aluminium alloy10.1016/j.optlastec.2018.06.036 ↗
19. Physical study of laser-produced plasma in confined geometry10.1063/1.346783 ↗
20. Thermal evolution of residual stress in IN718 alloy subjected to laser peening10.1016/j.optlaseng.2017.03.004 ↗
21. Prediction and characterization of residual stresses from laser shock peening10.1016/j.ijfatigue.2011.08.011 ↗
22. Numerical simulation of residual stress induced in 7075 aluminum alloy by repeated high-power laser pulses
23. Finite element simulation of laser shock peening10.1016/S0142-1123(99)00035-3 ↗
24. FEM simulation of residual stresses induced by laser Peening10.1051/epjap:2003037 ↗
25. On the influence of laser peening with different coverage areas on fatigue response and fracture behavior of Ti-6Al-4V alloy10.1016/j.engfracmech.2015.08.026 ↗
26. Effects of laser peening on residual stresses and fatigue crack growth properties of Ti-6Al-4V titanium alloy10.1016/j.optlaseng.2013.06.011 ↗
27. Effects of laser energy on fatigue crack growth properties of 6061–T6 aluminum alloy subjected to multiple laser peening10.1016/j.engfracmech.2013.01.011 ↗
28. Iron GH2036 alloy residual stress thermal relaxation behavior in laser shock processing10.1016/j.optlastec.2015.05.009 ↗
29. A finite element study of thermal relaxation of residual stress in laser shock peened IN718 superalloy10.1016/j.ijimpeng.2011.02.006 ↗
30. High temperature fatigue of nickel-base superalloys–A review with special emphasis on deformation modes and oxidation10.1016/j.engfailanal.2009.01.010 ↗