Crack initiation and propagation in torsional fatigue of circumferentially notched steel bars

Abstract Circumferentially notched bars of austenitic stainless steel, SUS316L, and carbon steel, SGV410, with three different notch-tip radii were fatigued under cyclic torsion without and with static tension. The torsional fatigue life of SUS316L was found to increase with increasing stress concentration under the same nominal shear stress amplitude. Electrical potential monitoring revealed that the crack initiation life decreased with increasing stress concentration, while the crack propagation life increased. This anomalous notch-strengthening effect was ascribed to the larger retardation of fatigue crack propagation by sliding contacts of fracture surfaces. The superposition of static tension on cyclic torsion causes notch weakening. The notch-strengthening effect in torsional fatigue was not found in carbon steels, SGV410. The difference in the crack path of small cracks near notch root between stainless steel and carbon steel gives rise to the difference in the notch effect in torsional fatigue. The factory-roof shape observed on fracture surfaces of SUS316L became finer with higher stress amplitude and for sharper notches. The superposition of static tension makes the factory-roof shape less evident. Under higher stresses, the fracture surface was smeared to be flat. The fracture surfaces of SGV410 became smoother with increasing stress amplitude and notch acuity. The three-dimensional feature of fracture surfaces clearly showed the difference of the topography of fracture surfaces. The topographic feature was closely related to the amount of retardation of crack propagation due to the sliding contact of fracture surfaces.