Melting route effects on the rotatory bending fatigue and rolling contact fatigue properties of high carbon bearing steel SAE52100
Source abstract
Abstract
Abstract The rotatory bending fatigue (RBF) behavior, the rolling contact fatigue (RCF) behavior and inclusion characteristics are examined on SAE52100 steels fabricated by three different melting routes. It is found that both RCF-life and RBF-strength are strongly determined by the inclusion size and no RCF could be found when the maximum inclusion size is smaller than 16 μm, which is strongly dependent on the melting routes. This conclusion is not only very important to control of the characteristics of non-metallic inclusions but to the adjustment and improvement of processing techniques of SAE52100 bearing steels in the steel industry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Steels for bearings10.1016/j.pmatsci.2011.06.002 ↗
2. Influence of nonmetallic inclusion size on rolling contact fatigue life in bearing steel
3. Evaluation of nonmetallic inclusions size by statistics of extreme value and prediction of fatigue life in bearing steels
4. Effect of ladle usage on cleanliness of bearing steel10.1007/s11663-017-1150-2 ↗
5. Rolling bearing steels – a technical and historical perspective10.1179/1743284711Y.0000000043 ↗
6. Rolling Bearings. Bearings materials, NSK Motion and Control, www.nskamericas.com.
7. Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime10.1016/j.ijfatigue.2005.08.015 ↗
8. Characteristic S-N properties of high-carbon–chromium-bearing steel under axial loading in long-life fatigue10.1046/j.1460-2695.2002.00574.x ↗
9. Reliability evaluation on very high cycle fatigue property of SAE52100 bearing steel10.1016/j.ijfatigue.2009.12.008 ↗
10. Effects of double quenching on fatigue properties of high carbon bearing steel with extra-high purity10.1016/j.ijfatigue.2019.06.036 ↗
11. Gigacycle rolling contact fatigue of bearing steels: A review10.1016/j.ijfatigue.2016.06.034 ↗
12. A new proposed Weibull distribution of inclusion size and its correlation with rolling contact fatigue life of an extra clean bearing steel10.1016/j.ijfatigue.2019.04.031 ↗
13. It’s sll about the steel: the importance of bearing steel cleanliness for long-life applications
14. Ovako Steel Cleanliness Specifications, Technical Report; 1998.
15. Grain refinement in bearing steels using a double-quenching heat-treatment process10.1007/s12239-009-0082-5 ↗
16. Fatigue strength improvement of AISI52100 bearing steel by induction heating and repeated quenching10.1007/s11003-012-9443-8 ↗
17. Microstructural analysis of a multistage heat-treated ultrahigh strength low alloy steel10.1016/0025-5416(84)90175-7 ↗
18. Manufacturing Engineer's Reference Book. Edited by D. Koshal. Butterworth-Heinemann Ltd., Linacre House, Jordan Hill, Oxford; 1993.
19. The relationship between 100Cr6 steelmaking, inclusion microstructure and rolling contact fatigue performance
20. Understanding the factors controlling rolling contact fatigue damage in VIM-VAR M50 steel10.1016/j.ijfatigue.2017.10.018 ↗
21. Local stress and strain in heterogeneously deformed aluminum: a comparison analysis by microhardness, electron microscopy and finite element modelling10.1016/j.ijplas.2018.11.014 ↗
22. High ductility and toughness of a micro-duplex medium-Mn steel in a large temperature range from -196 °C to 200 °C10.1016/S1006-706X(15)30122-9 ↗
23. Evaluation of local strength via microstructural quantification in a pearlitic rail steel deformed by simultaneous compression and torsion10.1016/j.msea.2018.09.067 ↗
24. Plastic deformation of submicron-sized crystals studied by in-situ Kikuchi diffraction and dislocation imaging10.1016/j.matchar.2012.04.019 ↗
25. Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel10.1016/j.ijfatigue.2019.105351 ↗
26. Structure and strength of sub-100 nm lamellar structures in cold-drawn pearlitic steel wire10.1080/02670836.2018.1440155 ↗
27. Enhancing heavy load wear resistance of AISI 4140 steel through the formation of a severely deformed compound-free nitrided surface layer10.1016/j.surfcoat.2018.09.066 ↗
28. The effect of long-time austenization on the wear resistance and thermal fatigue properties of a high-speed steel roll10.1007/s11661-009-9907-0 ↗
29. Sub-surface damage investigation by high frequency ultrasonic echography on 100Cr6 bearing steel10.1016/S0301-679X(96)00041-2 ↗
30. A new model for fatigue life dispersion in rolling contact10.1016/0043-1648(78)90211-9 ↗
31. A novel inclusion inspection method employing 20Hz fatigue testing10.1007/s11661-003-0011-6 ↗
32. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
33. Formation of CaS on Al2O3-CaO inclusions during solidification of steels10.1007/s11663-002-0042-1 ↗
34. Effect of CaO-Al2O3-MgO slags on the formation of MgO-Al2O3 inclusions in ferritic stainless steel10.1007/s11663-005-0041-0 ↗
35. Relationship among fatigue life, inclusion size and hydrogen concentration for high-strength steel in the vhcf regime10.1016/j.msea.2009.10.056 ↗
36. Propagation of surface initiated rolling contact fatigue cracks in bearing steel10.1016/j.ijfatigue.2016.12.004 ↗
37. Gigacycle fatigue properties of high-strength steels according to inclusion and ODA sizes10.1007/s11661-007-9225-3 ↗
38. Murakami Y, Toriyama T, Tsubota K, Furumura K. What happens to the fatigue limit of bearing steel without nonmetallic inclusions?: Fatigue strength of electron beam remelted super clean bearing steel. Bearing Steels: Into the 21st Century, ASTM STP 1327, J.J.C. Hoo and W.B. Green, Eds., American Society for Testing and Materials; 1998.10.1520/STP12122S ↗
39. Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. I: Basic fatigue mechanism and evaluation of correlation between the fatigue fracture stress and the size and location of non-metallic inclusions10.1016/0142-1123(89)90054-6 ↗
40. Mechanism of fatigue failure in ultralong life regime10.1046/j.1460-2695.2002.00576.x ↗
41. Statistical duplex S-N characteristics of high carbon chromium bearing steel in rotating bending in very high cycle regime10.1016/j.ijfatigue.2009.08.001 ↗
42. Prediction of threshold value for FGA formation10.1016/j.msea.2011.05.070 ↗
43. Effects of inclusion size and location on very-high-cycle fatigue behavior for high strength steels10.1016/j.msea.2012.07.118 ↗
44. Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels10.1016/j.scriptamat.2012.07.049 ↗
45. Factors influencing the mechanism of superlong fatigue failure in steels10.1046/j.1460-2695.1999.00187.x ↗
46. Characterization of inclusions in clean steels: a review including the statistics of extremes methods10.1016/S0079-6425(02)00014-2 ↗
47. The exponential law of endurance tests
48. Ultrasonic fatigue tests on bearing steel AISI-SAE 52100 at frequency of 20 and 30 kHz10.1016/S0142-1123(03)00161-0 ↗
49. Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety10.1016/j.ijfatigue.2006.11.015 ↗