Fatigue life of micro-arc oxidation coated AA2024-T3 and AA7075-T6 alloys
Source abstract
Abstract
Abstract Two types of aluminum (Al) alloys, namely 2024-T3 and 7075-T6, were treated by micro-arc oxidation (MAO). Microstructure of as-fabricated ceramic coatings was investigated. Furthermore, the effect of MAO time on fatigue life of the coated samples with thin coating was systematically explored. Morphologies of the coating, second phase particles, and distribution of copper (Cu) and Zinc (Zn) in the coating were observed by scanning electron microscopy, confocal laser scanning microscopy, and energy dispersive spectrometry. Residual stress and phase compositions were analyzed by X-ray diffraction. More Cu in 2024-T3 Al alloy promoted formation of the coating; however, surface porosity of the coating was high. Residual stress induced in the coating deposited on AA2024 was compressive in nature. In contrast, the residual stress in the coating prepared on AA7075 was tensile due to the high content of Zn in the substrate. The results of fatigue test showed that fatigue life of the coated AA2024 increased; however, the MAO treatment was detrimental to fatigue performance of the AA7075 compared to uncoated samples. With prolonging oxidation time, the fatigue life of the coated samples first increased and then decreased. The changes of fatigue life were attributed to the residual stress, coating defects including micro-pores and micro-cracks, and second phase particles in the Al alloy substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application10.1016/j.apsusc.2009.06.116 ↗
2. Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D10.1016/j.electacta.2005.08.026 ↗
3. Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: prospects and challenges10.1016/j.pmatsci.2013.08.002 ↗
4. Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance: Part II10.1016/j.apsusc.2011.10.064 ↗
5. Corrosion and nanomechanical behaviors of plasma electrolytic oxidation coated AA7020-T6 aluminum alloy10.1016/j.msea.2016.02.045 ↗
6. An investigation into the mechanical and tribological properties of plasma electrolytic oxidation and hard-anodized coatings on 6082 aluminum alloy10.1016/j.msea.2011.06.032 ↗
7. Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of AM50 magnesium alloy10.1016/j.msea.2008.04.031 ↗
8. Novel coatings obtained by plasma electrolytic oxidation to improve the corrosion resistance of magnesium-based biodegradable implants10.1016/j.surfcoat.2018.09.007 ↗
9. Fretting wear behaviour of ceramic coating prepared by micro-arc oxidation on Al-Si alloy10.1016/j.wear.2007.01.050 ↗
10. Characterisation of oxide films produced by plasma electrolytic oxidation of a Ti-6Al-4V alloy10.1016/S0257-8972(00)00719-2 ↗
11. Effect of microarc oxidised layer thickness on plain fatigue and fretting fatigue behaviour of Al-Mg-Si alloy10.1016/j.ijfatigue.2007.08.014 ↗
12. Fatigue properties of Keronite((R)) coatings on a magnesium alloy10.1016/S0257-8972(03)00877-6 ↗
13. The effect of oxide coatings on fatigue properties of 7475–T6 aluminium alloy10.1016/j.surfcoat.2006.02.002 ↗
14. Effect of microarc oxidation coating on fatigue performance of Ti-Al-Zr alloy10.1016/j.apsusc.2009.06.038 ↗
15. High-cycle fatigue behavior of microarc oxidation coatings deposited on a 6061–T6 Al alloy10.1007/s11661-009-0057-1 ↗
16. Fatigue response of porous coated titanium biomedical alloys10.1016/j.scriptamat.2009.03.017 ↗
17. In vitro fatigue behavior of surface oxidized Ti35Zr10Nb biomedical alloy10.1016/j.msec.2011.08.010 ↗
18. Influence of prior shot peening variables on the fatigue life of micro arc oxidation coated 6061–T6 Al alloy10.1016/j.ijfatigue.2017.09.020 ↗
19. Effect of combined shot-peening and PEO treatment on fatigue life of 2024 Al alloy10.1016/j.tsf.2006.07.123 ↗
20. The influence of the coating technique on the high cycle fatigue life of alumina coated Al 6061 alloy10.1007/s12666-010-0028-7 ↗
21. Fatigue behavior of modified surface of Ti-6Al-7Nb and CP-Ti by micro-arc oxidation10.1016/j.matdes.2014.07.074 ↗
22. Micro-arc oxidation of Ti6Al4V and Ti6Al7Nb alloys for biomedical applications10.1016/j.matchar.2011.01.002 ↗
23. Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214–T6 and 7050–T7410.1016/j.surfcoat.2009.03.021 ↗
24. The effect of Zn on the microarc oxidation coating behavior of synthetic Al-Zn binary alloys10.1016/j.jallcom.2012.02.094 ↗
25. Effect of the Cu content on the microstructure and corrosion behavior of PEO coatings on Al-xCu alloys10.1149/2.0471809jes ↗
26. Hudson CM. Effect of stress ratio on fatigue-crack growth in 7075-T6 and 2024-T3 aluminum-alloy specimens, New York; 1969.10.1016/0013-7944(69)90003-4 ↗
27. Effect of micro-arc oxidation coatings and micro-arc oxidation coatings after sealing treatment on fatigue properties of 2024 aluminium alloys
28. Improvement on the fatigue performance of 2024–T4 alloy by synergistic coating technology10.3390/ma7053533 ↗
29. Microarc oxidation coating combined with surface pore-sealing treatment enhances corrosion fatigue performance of 7075–T7351 Al alloy in different media10.3390/ma10060609 ↗
30. Rotating bending fatigue microscopic fracture characteristics and life prediction of 7075–T7351 Al alloy10.3390/met8040210 ↗
31. A study of the corrosion of aluminum alloy 2024–T3 under thin electrolyte layers10.1016/j.corsci.2003.10.005 ↗
32. Microstructure and failure mechanisms of refill friction stir spot welded 7075–T6 aluminum alloy joints10.1016/j.matdes.2012.08.026 ↗
33. The effect of surface roughness of the substrate on fatigue life of coated aluminum alloy by micro-arc oxidation10.1016/j.jallcom.2018.06.290 ↗
34. A model to predict the relaxation of weld residual stress by cyclic load: experimental and finite element modeling10.1016/j.ijfatigue.2016.11.011 ↗
35. The tribological performance of ultra-hard ceramic composite coatings obtained through microarc oxidation10.1016/S0257-8972(02)00646-1 ↗
36. Growth regularity of ceramic coatings formed by microarc oxidation on Al-Cu-Mg alloy10.1016/S0040-6090(00)01026-9 ↗
37. Growth, microstructure and mechanical properties of microarc oxidation coatings on titanium alloy in phosphate-containing solution10.1016/j.apsusc.2004.03.231 ↗
38. Characterisation of ceramic coatings produced by plasma electrolytic oxidation of aluminum alloy10.1016/j.msea.2006.09.004 ↗
39. Fatigue behavior and physical characterization of surface-modified Ti-6Al-4V ELI alloy by micro-arc oxidation
40. Growth of ceramic coatings on AZ91D magnesium alloys by micro-arc oxidation in aluminate-fluoride solutions and evaluation of corrosion resistance10.1016/j.apsusc.2004.11.031 ↗
41. Influence of frequency and duty cycle on microstructure of plasma electrolytic oxidized AA7075 and the correlation to its corrosion behavior10.1016/j.surfcoat.2015.08.043 ↗
42. Composition and adhesion of protective coatings on aluminum10.1016/S0257-8972(01)01307-X ↗
43. Interface adhesion properties of functional coatings on titanium alloy formed by microarc oxidation method10.1016/j.apsusc.2009.03.007 ↗
44. High strength Al with uniformly distributed Al2O3 fragments fabricated by accumulative roll bonding and plasma electrolytic oxidation10.1016/j.msea.2015.05.104 ↗
45. X-ray computed tomographic investigation of the porosity and morphology of plasma electrolytic oxidation coatings10.1021/acsami.6b00274 ↗
46. Residual stresses in plasma electrolytic oxidation coatings on Al alloy produced by pulsed unipolar current10.1016/j.surfcoat.2005.08.092 ↗
47. Electrochemical performance of microarc oxidation films formed on AZ91D magnesium alloy in silicate and phosphate electrolytes10.1016/j.surfcoat.2005.05.039 ↗
48. Characterization and wear- and corrosion-resistance of microarc oxidation ceramic coatings on aluminum alloy10.1016/j.jallcom.2004.05.084 ↗
49. Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys10.1016/S0272-8842(96)00067-3 ↗
50. Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process10.1016/j.surfcoat.2004.10.147 ↗
51. Effects of micro arc oxidation on fatigue limits and fracture morphologies of 7475 high strength aluminum alloy10.1016/j.jallcom.2015.07.262 ↗
52. Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperature10.1016/j.ijfatigue.2018.05.003 ↗
53. Residual stress relaxation and low- and high-cycle fatigue behavior of shot-peened medium-carbon steel10.1016/j.ijfatigue.2013.07.001 ↗
54. Micro-crack initiation and propagation in a high strength aluminum alloy during very high cycle fatigue10.1016/j.msea.2018.01.008 ↗
55. A literature survey on the stability and significance of residual stresses during fatigue10.1111/j.1460-2695.2007.01102.x ↗
56. Influence of duty cycle on fatigue life of AA2024 with thin coating fabricated by micro-arc oxidation10.1016/j.surfcoat.2018.12.118 ↗
57. Schijve J. Fatigue of structures and materials, 2nd ed., New York; 2004.
58. Statistical aspects of fatigue crack nucleation from particles10.1007/BF02661216 ↗
59. Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel10.1016/j.ijfatigue.2018.08.009 ↗
60. Structure and properties characterization of ceramic coatings produced on Ti-6Al-4V alloy by microarc oxidation in aluminate solution10.1016/S0167-577X(01)00440-2 ↗