Analytical fatigue life prediction of shot peened AA 7050-T7451
Source abstract
Abstract
Abstract Fatigue lives of as-polished and shot peened specimens were predicted using the original Navarro-Rios model (monotonic damage model) and a more recent version of the same model (cyclic damage model). Crack closure, residual stress relaxation, cold work and cyclic yield stress were experimentally characterized and implemented within the cyclic damage model. Two shot peening conditions were studied (S230 and Z425 shots at 8A and 100% coverage). The in-depth profiles of the relaxed residual stress and cold work were experimentally characterized and implemented within both versions of the model. Two stress amplitudes leading to high cycle fatigue (HCF) and low cycle fatigue (LCF) were studied at a stress ratio of 0.1. Predictions of the cyclic damage model were globally closer to experimental fatigue lives than those predicted by the monotonic damage model. The monotonic damage model significantly overestimated fatigue life of shot peened samples in LCF. A detailed list of the used parameters and their characterization is provided. Finally, potential improvements and uses of the model for future studies are proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Michaud AS. Influence du grenaillage sur la vie en fatigue d’un alliage d’aluminium. Master’s thesis, École Polytechnique de Montréal, Canada; 2007.
2. Improvement of fatigue property in 7050-T7451 aluminum alloy by laser peening and shot peening10.1016/j.msea.2011.01.077 ↗
3. The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloy10.1016/j.msea.2009.08.045 ↗
4. Optimisation of the fatigue resistance of 2024-T351 aluminium alloys by controlled shot peening-methodology, results and analysis10.1016/j.ijfatigue.2004.01.003 ↗
5. Modelling fatigue crack growth in shot-peened components of Al 2024-T35110.1046/j.1460-2695.2000.00287.x ↗
6. High cycle fatigue characteristics of aluminum alloy by shot peening
7. High-and very high-cycle plain fatigue resistance of shot peened high-strength aluminum alloys: The role of surface morphology10.1016/j.ijfatigue.2014.07.002 ↗
8. Influence of shot peening and hard chromium electroplating on the fatigue strength of 7050-T7451 aluminum alloy10.1016/j.ijfatigue.2006.10.003 ↗
9. The surface treatment influence on the fatigue crack propagation of al 7050-T7451 alloy10.1016/j.msea.2008.10.053 ↗
10. Suresh · 1998
11. Predicting fatigue resistance of nano-twinned materials: Part I–role of cyclic slip irreversibility and peierls stress10.1016/j.ijfatigue.2014.05.014 ↗
12. Predicting fatigue resistance of nano-twinned materials: Part II–effective threshold stress intensity factor range10.1016/j.ijfatigue.2014.06.006 ↗
13. Nonuniqueness of the fatigue threshold10.1016/j.ijfatigue.2017.07.027 ↗
14. Factors of crack initiation and microcrack propagation in aluminum lithium 2091 and in aluminum 2024
15. Small crack growth and fatigue life predictions for high-strength aluminium alloys: Part I–experimental and fracture mechanics analysis10.1046/j.1460-2695.1998.00080.x ↗
16. Experimental investigation and fatigue life prediction for 7475-T7351 aluminum alloy with and without shot peening-induced residual stresses10.1016/j.actamat.2011.03.013 ↗
17. Observations of fatigue crack initiation in 7075-T65110.1016/j.ijfatigue.2009.06.003 ↗
18. Mechanisms of fatigue crack growth–a critical digest of theoretical developments10.1111/ffe.12392 ↗
19. Newman Jr JC. Fastran-2: A fatigue crack growth structural analysis program. NASA STI/Recon Technical Report N 92; 1992.
20. Fatigue crack growth computer program “NASGRO” version 3.0: reference manual. Tech Rep ;2002.
21. Harter J. AFGROW users guide and technical manual. Air vehicles directorate. Air Force Research Laboratory OH.
22. Crack growth of physically small cracks10.1016/j.ijfatigue.2007.01.031 ↗
23. Analysis of the effects of controlled shot peening on fatigue damage of high strength aluminium alloys10.1016/S0142-1123(02)00049-X ↗
24. A crack-tip strain model for the growth of small fatigue cracks10.1016/0036-9748(83)90346-0 ↗
25. Short crack fatigue behaviour in a medium carbon steel10.1111/j.1460-2695.1984.tb00408.x ↗
26. A micro-mechanics analysis for short fatigue crack growth10.1111/j.1460-2695.1985.tb00419.x ↗
27. Modelling of small fatigue crack growth interacting with grain boundary10.1016/0013-7944(86)90266-3 ↗
28. Short and long fatigue crack growth: a unified model10.1080/01418618808204496 ↗
29. An alternative model of the blocking of dislocations at grain boundaries10.1080/01418618808204497 ↗
30. Compact solution for a multizone bcs crack model with bounded or unbounded end conditions10.1080/01418618808204498 ↗
31. Modelling small fatigue cracks interacting with grain boundaries10.1111/j.1460-2695.1991.tb00658.x ↗
32. A micromechanical model for small fatigue crack growth: an approach based on two threshold conditions10.1111/j.1460-2695.2009.01355.x ↗
33. Bianchetti C, Zheng R, Chromik R, Lévesque M, Brochu M. Comparison of small and long fatigue crack growth behavior in AA 7050-T7451. Submitted to Eng Fracture Mech J in March 2018. Also available in the Ph.D thesis of the current author.10.1016/j.engfracmech.2018.09.009 ↗
34. The role of microstructural dissimilitude in fatigue and fracture of small cracks10.1016/0001-6160(88)90038-7 ↗
35. Predicting the interfaces between fatigue crack growth regimes in 7150-T651 aluminium alloy using the fatigue damage map10.1016/S0921-5093(02)00416-1 ↗
36. Probabilistic analysis of the effect of shot peening on the high and low cycle fatigue behaviors of AA 7050-T745110.1016/j.ijfatigue.2018.02.029 ↗
37. Two-parameter fatigue crack growth driving force: successive blocking of the monotonic and cyclic plastic zones at microstructural barriers10.1016/j.ijfatigue.2011.12.013 ↗
38. Surface roughness and residual stresses on the fatigue life of shot peened components: Theoretical determination
39. de los Rios E, Trull M, Levers A. Extending the fatigue life of aerospace materials by surface engineering. In: ECF13, San Sebastian 2000; 2000.
40. Fatigue crack growth modelling by successive blocking of dislocations
41. de los Rios E, Trooll M, Levers A. Improving the fatigue crack resistance of 2024-T351 aluminium alloy by shot peening. In: CEAS forum on life extension- aerospace technology opportunities, Cambridge, United Kingdom; 1999. p. 26.
42. An analysis of stress concentrations caused by shot peening and its application in predicting fatigue strength10.1111/j.1460-2695.1992.tb01262.x ↗
43. A micro-mechanics model of corrosion-fatigue crack growth in steels10.1111/j.1460-2695.1996.tb00174.x ↗
44. Fatigue crack growth threshold conditions at notches. part I: theory10.1046/j.1460-2695.2000.00257.x ↗
45. Fatigue crack growth threshold conditions at notches. part II: generalization and application to experimental results10.1046/j.1460-2695.2000.00258.x ↗
46. Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatments10.1007/s00339-010-5672-6 ↗
47. Assessment of surface hardening effects from shot peening on a ni-based alloy using electron backscatter diffraction techniques10.1016/j.actamat.2011.04.025 ↗
48. Almen intensity effect on microstructure and mechanical properties of low carbon steel subjected to severe shot peening10.1016/j.apsusc.2013.10.184 ↗
49. Experimental assessment and simulation of surface nanocrystallization by severe shot peening10.1016/j.actamat.2015.06.054 ↗
50. Dowling · 2012 · 339
51. Theory of stress concentration for shear-strained prismatical bodies with arbitrary nonlinear stress-strain law10.1115/1.3641780 ↗
52. Dowling · 2012 · 715
53. Dowling · 2012 · 644
54. Reverse bending fatigue of shot peened 7075-T651 aluminium alloy: The role of residual stress relaxation10.1016/j.ijfatigue.2008.11.017 ↗
55. Characterization of shot peened 2024-t351 aluminum alloy
56. Influence of different shot peening treatments on surface state and fatigue behaviour of Al 6063 alloy10.1016/j.engfracmech.2017.03.017 ↗
57. Crack incubation in shot peened AA7050 and mechanism for fatigue enhancement10.1111/ffe.12652 ↗
58. ASM 4050H Standard Aluminum Alloy, Plate 6.2Zn 2.3Cu 2.2Mg 0.12Zr (7050-T7451) Solution Heat treated, stress relieved, and overaged. SAE International; 2011.
59. Noyan · 2013
60. Precision and accuracy of stress measurement with a portable x-ray machine using an area detector10.1107/S1600576716018914 ↗
61. Delbergue D, Lévesque M, Bocher P. About the importance of X-ray elastic constant determination in the precise measurement of residual stress profiles. In: 13th international conference of shot peening; 2017. p. 237–43.
62. Moore M, Evans W. Mathematical correction for stress in removed layers in X-ray diffraction residual stress analysis. Tech Rep, SAE Technical Paper; 1958.10.4271/580035 ↗
63. Warren · 1969
64. Neutron diffraction in situ monitoring of the dislocation density during martensitic transformation in a stainless steel10.1016/j.scriptamat.2012.11.031 ↗
65. The measurement of subsurface residual stress and cold work distributions in nickel base alloys
66. Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy10.1016/j.ijfatigue.2010.08.012 ↗
67. Surface characteristics and fatigue behavior of shot peened Inconel 71810.1016/j.ijfatigue.2018.01.005 ↗
68. Dowling · 2012 · 449
69. Hardness as a tool for the estimation of the microstructural threshold