Cyclic deformation and microstructure evolution of high Nb containing TiAl alloy during high temperature low cycle fatigue
Source abstract
Abstract
Abstract The cyclic stress-strain (CSS) behavior of high Nb containing TiAl alloy with a duplex microstructure was investigated at 850 °C. Transmission electron microscope (TEM) observations and electron backscattered diffraction (EBSD) techniques were carried out to obtain insight into the microstructure evolution governing this behavior. At low strain amplitude, the material exhibits a rapid saturation of stress amplitude. At intermediate and high strain amplitude, the CSS behavior is characterized by generally cyclic softening. The changes of microstructure are strain-induced phase transformations and dynamic recrystallization, which lead to a degradation of lamellar microstructure. Twin boundaries can promote discontinuous dynamic recrystallization of γ phase, for processing relatively high energy. α2 + γ → B2, α2 → B2, and α2lamellae → γ phase transformations are detrimental to fatigue life of the material, because fracture propagation are usually along B2 phase boundaries and γ grain boundaries, thus, the fracture mode is a combination of ductile fracture and intergranular cleavage fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Gamma titanium aluminides: their status and future10.1007/BF03221229 ↗
2. Appel · 2011
3. Intermetallic alloys based on gamma titanium aluminide10.1007/BF03220267 ↗
4. Schafrik · 2001 · 13
5. Gamma titanium aluminide alloys—an assessment within the competition of aerospace structural materials10.1016/S0921-5093(98)01158-7 ↗
6. Thermomechanical fatigue behaviours of a third generation γ-TiAl based alloy10.1016/j.intermet.2006.10.027 ↗
7. Recent progress in the development of gamma titanium aluminide alloys10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J ↗
8. The microstructure and tensile property degradation of a gamma-TiAl alloy during isothermal and cyclic high temperature exposures10.1016/j.intermet.2010.11.006 ↗
9. Development and evaluation of TiAl sheet structures for hypersonic applications10.1016/j.msea.2007.02.020 ↗
10. Plastic anisotropy and fracture behavior of cyclically deformed TiAl polysynthetically twinned crystals10.1016/0921-5093(94)03270-X ↗
11. Electron microscope characterization of low cycle fatigue in a high-strength multiphase titanium aluminide alloy10.1016/j.ijfatigue.2009.04.001 ↗
12. Effect of deformation temperature on fatigue and fracture behavior in TiAl polysynthetically twinned crystals10.1007/s11661-998-1003-3 ↗
13. Low-cycle fatigue and deformation substructures in an engineering TiAl alloy10.1016/j.intermet.2006.09.003 ↗
14. Cyclic deformation mechanisms in a gamma titanium aluminide alloy at room temperature10.1016/j.scriptamat.2004.09.022 ↗
15. Microstructure degradation in high temperature fatigue of TiAl alloy10.1016/j.ijfatigue.2013.10.005 ↗
16. Mechanical properties of high niobium TiAl alloys doped with Mo and C10.1016/j.matdes.2016.03.079 ↗
17. Cyclic plasticity and strain localization in cast γ-TiAl based alloy10.1016/j.proeng.2011.04.231 ↗
18. Cyclic deformation and fatigue in TiAl intermetallic compound under plastic strain control10.1016/j.ijfatigue.2009.10.009 ↗
19. Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale10.1016/j.intermet.2006.10.003 ↗
20. Ordered ωo phases in a 4Zr–4Nb-containing TiAl-based alloy10.1016/j.actamat.2007.12.013 ↗
21. On the microsegregation of Ti–45Al–(8–9)Nb–(W, B, Y) alloy10.1016/j.matlet.2006.04.115 ↗
22. Investigations of hydrogen-promoted α2-lamella decomposition of a γ-TiAl based alloy10.1016/j.matlet.2015.03.079 ↗
23. Ordered α2 to ωo phase transformations in high Nb-containing TiAl alloys10.1016/j.actamat.2015.03.025 ↗
24. Thermal exposure induced α2+γ→B2(ω) and α2→B2(ω) phase transformations in a high Nb fully lamellar TiAl alloy10.1016/S1359-6462(02)00350-0 ↗
25. Effect of stress ratio on fatigue crack growth in TiAl intermetallics at room and elevated temperatures10.1016/S0921-5093(00)00958-8 ↗
26. Cyclic deformation mechanisms in a cast gamma titanium aluminide alloy10.1016/j.msea.2005.01.073 ↗
27. Physical constants, deformation twinning and microcracking of titanium aluminides10.1007/s11661-998-0158-2 ↗
28. On deformation twin boundaries and twin-related lamellae in TiAl
29. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 71810.1016/j.msea.2007.09.008 ↗
30. Dynamic recrystallization kinetics of a powder metallurgy Ti–22Al–25Nb alloy during hot compression10.1016/j.msea.2014.04.062 ↗
31. Effect of elastic anisotropy on the dissociation widths of superdislocations in TiAl10.1016/S0167-577X(00)00315-3 ↗