Multiaxial fatigue behavior of AISI 316L subjected to strain-controlled and ratcheting paths
Source abstract
Abstract
Abstract To investigate the material behavior of a stainless steel grade AISI 316L, subjected to loading conditions typical for the primary cooling circuit of a light water nuclear reactor, a set of uniaxial, torsional and multiaxial low cycle fatigue and strain-controlled ratcheting tests has been carried out. The main goal of these experiments is to analyze how the cyclic deformation response is influenced by strain amplitudes, loading paths and ratcheting, and to estimate how fatigue life is affected by these elements. Finally, the performance of three advanced multiaxial fatigue criteria (i.e. Smith–Watson–Topper, Fatemi–Socie and Jiang) has been critically evaluated for all the considered loading cases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Dahlberg MKF, et al. Development of a European procedure for assessment of high cycle thermal fatigue in light water reactors: final report of the NESC-thermal fatigue project. Technical report EUR 22763 EN, 2007.
2. Inelastic analysis of new thermal ratchetting due to a moving temperature front10.1016/S0749-6419(01)00062-6 ↗
3. Synthesis of the elastoviscoplastic behavior and modelization of an austenitic stainless steel over a large temperature range, under uniaxial and biaxial loadings. Part I: Behavior10.1016/0749-6419(93)90014-H ↗
4. Ratcheting of cyclically hardening and softening materials: I. Uniaxial behavior10.1016/0749-6419(94)90033-7 ↗
5. Experimental study on uniaxial and multiaxial strain cyclic characteristics and ratcheting of 316L stainless steel
6. Ratchetting process in the stainless steel AISI 316L at 300K: an experimental investigation10.1016/S0749-6419(03)00076-7 ↗
7. About the cyclic accumulation of the inelastic strain observed in metals subjected to cyclic stress control10.1016/j.ijplas.2012.10.009 ↗
8. Ratcheting of cyclically hardening and softening materials: II. Multiaxial behavior10.1016/0749-6419(94)90034-5 ↗
9. Ratchetting under tension–torsion loadings: experiments and modelling10.1016/S0749-6419(99)00056-X ↗
10. Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension–torsion-internal and external pressure10.1016/S0749-6419(01)00013-4 ↗
11. The deformation and fracture of a ductile metal under superimposed cyclic and monotonic strain10.1520/STP26840S ↗
12. Ratchetting characteristics of 316FR steel at high temperature. Part I: Strain-controlled ratchetting experiments and simulations10.1016/S0749-6419(98)00009-6 ↗
13. Uniaxial ratchetting of 316FR steel at room temperature. Part I: Experiments10.1115/1.482761 ↗
14. Cyclic mechanical behavior of 316L: uniaxial LCF and strain-controlled ratcheting tests10.1016/j.nucengdes.2013.01.010 ↗
15. A review of critical plane orientations in multiaxial fatigue failure criteria of metallic materials10.1007/s10704-005-1088-2 ↗
16. A stress–strain function for the fatigue of metals (stress–strain function for metal fatigue including mean stress effect)
17. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
18. A multiaxial fatigue strain energy density parameter related to the critical fracture plane10.1111/j.1460-2695.1995.tb00140.x ↗
19. An energy method for predicting fatigue life, crack orientation, and crack growth under multiaxial loading condition10.1016/S0142-1123(01)00169-4 ↗
20. A fatigue criterion for general multiaxial loading10.1046/j.1460-2695.2000.00247.x ↗
21. A modification of Morrow and Smith–Watson–Topper mean stress correction models10.1111/j.1460-2695.2011.01577.x ↗
22. A generalized fatigue damage parameter for multiaxial fatigue life prediction under proportional and non-proportional loadings10.1016/j.ijfatigue.2013.10.007 ↗
23. A unified multiaxial fatigue damage model for isotropic and anisotropic materials10.1016/j.ijfatigue.2006.03.011 ↗
24. Viscoplastic behavior of stainless-steel AISI 316L under cyclic loading conditions10.1007/BF01176091 ↗
25. ASTM, ASTM E606/E606M – 12, Standard test method for strain-controlled fatigue testing. In: ASTM international, West Conshohocken (PA USA): Book of Standards Volume 03.01; 2012.
26. ASTM, ASTM E2207 – 08, Standard practice for strain-controlled axial-torsional fatigue testing with thin-walled tubular specimens. In: ASTM International, West Conshohocken (PA, USA): Book of Standards Volume 03.01; 2008.
27. A study of the effects of cyclic thermal stresses on a ductile metal
28. Manson SS. NACA Rep. TN-2933, 1953.
29. Chopra OK, Shack WJ. Review of the margins for ASME code fatigue design curve-effects of surface roughness and material variability. Tech. Rep. NUREG/CR-6815 ANL-02/39, Washington (DC, USA): Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission; 2003.10.2172/925073 ↗
30. A computational fatigue analysis of cyclic thermal shock in notched specimens10.1016/j.nucengdes.2008.10.003 ↗
31. 2000 · 212
32. Plastically elastically dominant fatigue interaction in 316L stainless steel and 6061-T6 aluminium alloy10.1046/j.8756-758x.2002.00488.x ↗
33. Analysis of the hysteresis loop in stainless steels I, Austenitic and ferritic steels10.1016/S0921-5093(00)01251-X ↗
34. Benchmark experiments and characteristic cyclic plasticity deformation10.1016/j.ijplas.2007.10.003 ↗
35. Low cycle fatigue behavior in vacuum of a 316L type austenitic stainless steel between 20 and 600°C. Part I: Fatigue resistance and cyclic behavior10.1016/S0921-5093(96)10558-X ↗
36. Cyclic plasticity in type 316L austenitic stainless-steel10.1111/j.1460-2695.1994.tb00808.x ↗
37. An experimental investigation of cyclic hardening of 316-stainless steel and of 2024-aluminum alloy under multiaxial loadings10.1016/0029-5493(89)90112-X ↗
38. Constitutive-equations for nonproportional cyclic elastoviscoplasticity10.1115/1.3225985 ↗
39. Effects of plastic strain amplitudes on nonproportional cyclic plasticity10.1007/BF01176916 ↗
40. Time-independent constitutive theories for cyclic plasticity10.1016/0749-6419(86)90010-0 ↗
41. An internal variable dependent constitutive cyclic plastic material description including ratcheting calibrated for AISI 316L10.1016/j.commatsci.2014.02.026 ↗
42. Dislocation substructures and nonproportional hardening10.1115/1.2903357 ↗
43. Microscopic analysis of the influence of ratcheting on the evolution of dislocation structures observed in AISI 316L stainless steel during low cycle fatigue10.1016/j.msea.2013.08.041 ↗
44. Multiaxial fatigue damage models10.1115/1.3225980 ↗
45. Biaxial fatigue of stainless steel 304 under irregular loading
46. A weight function-critical plane approach for low-cycle fatigue under variable amplitude multiaxial loading10.1111/j.1460-2695.2006.01003.x ↗
47. Die Lebensdauer von Kugellagern
48. Cumulative damage in fatigue10.1115/1.4009458 ↗