Effect of shot peening on fatigue performance of Ti2AlNb intermetallic alloy
Source abstract
Abstract
Abstract The effect of shot peening on Ti2AlNb fatigue performance was investigated. Glass fine shot peening was used and residual stresses were measured by XRD technology and electropolishing method. Rotating bending fatigue test was performed. The results show compressive residual stress is introduced and the maximum is 322 MPa, and fatigue property is significantly improved. The high cycle fatigue life is prolonged more than 25 times and fatigue endurance limit is increased from 170 MPa to 360 MPa. Moreover, fatigue cracks initiate beneath surface enhanced layer for SP specimens, while for referenced specimens they are located at surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. A new ordered orthorhombic phase in a Ti3AlNb alloy10.1016/0001-6160(88)90141-1 ↗
2. The intermetallic Ti2AlNb10.1016/S0079-6425(97)00012-1 ↗
3. Intermetallic alloys based on orthorhombic titanium aluminide10.1002/1527-2648(200111)3:11<851::AID-ADEM851>3.0.CO;2-G ↗
4. Double glow plasma surface molybdenizing of Ti2AlNb10.1016/j.surfcoat.2006.07.196 ↗
5. Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide10.1016/j.intermet.2004.12.003 ↗
6. S.Q. Li, Y.J. Cheng, X.B. Liang, J.W. Zhang, Recent work on alloy and process development of Ti2AlNb based alloys (2005), https://doi:10.4028/www.scientific.net/MSF.475-479.795.10.4028/www.scientific.net/MSF.475-479.795 ↗
7. Electron microscope characterization of low cycle fatigue in a high-strength multiphase titanium aluminide alloy10.1016/j.ijfatigue.2009.04.001 ↗
8. Cyclic deformation and microstructure evolution of high Nb containing TiAl alloy during high temperature low cycle fatigue10.1016/j.ijfatigue.2017.02.019 ↗
9. Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy10.1016/j.actamat.2005.10.043 ↗
10. Fatigue response of a grain refined TiAl alloy Ti-44Al-5Nb-1W-1B with varied surface quality and thermal exposure history10.1016/j.intermet.2017.01.010 ↗
11. The fatigue strength of notched specimens10.1007/978-1-4020-6808-9_7 ↗
12. Gao · 2014
13. Another mechanism for fatigue strength improvement of metallic parts by shot peening10.1361/105994903100277148 ↗
14. Residual stresses and fatigue performance10.1016/j.engfailanal.2006.02.011 ↗
15. Improvement of fatigue property in 7050–T7451 aluminum alloy by laser peening and shot peening10.1016/j.msea.2011.01.077 ↗
16. Precipitation and residual stress relaxation kinetics in shot-peened Inconel 71810.1361/105994906X124613 ↗
17. An analysis of residual stress fields caused by shot peening10.1007/s11661-002-0186-2 ↗
18. Investigation on the tensile residual stress due to shot peening and the internal fatigue limit of materials
19. Effect of shot peening on fatigue property of 0Cr13Ni8Mo2Al steel10.1179/026708303225010650 ↗
20. Prediction of the S-N curves of high-strength steels in the very high cycle fatigue regime10.1016/j.ijfatigue.2010.02.006 ↗