journal article·2014-08

Microstructure degradation in high temperature fatigue of TiAl alloy

T. Kruml, K. Obrtlík

Publisher page

Abstract

Abstract Low cycle fatigue properties of lamellar TiAl with 8 at.% Nb were studied at four temperatures: room temperature, 700, 750 and 800 °C. Up to 750 °C, stable cyclic behaviour is observed while cyclic softening is characteristic for 800 °C. The strength of the alloy is still high even at 800 °C. The TEM observation did not reveal any substantial changes in the microstructure due to the cycling at RT. At 750 °C, the lamellar structure was in some places destroyed by cyclic plastic straining and pure γ-phase islands with high density of dislocation debris were formed. At 800 °C, the domains without lamellar structure cover about 10% of volume and are almost dislocation free. The destruction of lamellar microstructure and possible annealing of dislocation debris is the reason for marked cyclic softening at 800 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Fatigue deformation of TiAl base alloys10.1007/BF02661644 ↗
2. Plastic anisotropy and fatigue of TiAl PST crystals: a review10.1016/0966-9795(96)00012-X ↗
3. Cyclic deformation-behavior of Ti–Al alloys containing oriented lamellae10.1080/01418619508242960 ↗
4. Fatigue properties of TiAl alloys10.1016/j.intermet.2004.09.007 ↗
5. Low-cycle fatigue and deformation substructures in an engineering TiAl alloy10.1016/j.intermet.2006.09.003 ↗
6. Cyclic deformation mechanisms in a cast gamma titanium aluminide alloy10.1016/j.msea.2005.01.073 ↗
7. Fatigue tests of un-HIPed gamma-TiAl engine valves for motorcycles10.1016/j.ijfatigue.2005.09.004 ↗
8. Understanding the fatigue resistance of gamma titanium aluminide
9. Cyclic plasticity and strain localization in cast γ-TiAl based alloy10.1016/j.proeng.2011.04.231 ↗
10. Persistent microslip bands in the lamellar TiAl structure subjected to room temperature fatigue10.1016/S1359-6462(01)01114-9 ↗
11. Electron microscope characterization of low cycle fatigue in a high-strength multiphase titanium aluminide alloy10.1016/j.ijfatigue.2009.04.001 ↗
12. Fundamental aspects of fatigue and fracture in a TiAl sheet alloy10.1007/s11661-998-0160-8 ↗
13. Fracture characteristics of γ-TiAl alloy with high Nb content under cyclic loading10.1016/j.jallcom.2008.10.118 ↗
14. Influence of niobium alloying on the low cycle fatigue of cast TiAl alloys at room and high temperatures10.1016/j.proeng.2010.03.246 ↗
15. Fatigue properties of high Nb TiAl alloy
16. Thermo-mechanical fatigue behaviour of a modern γ-TiAl alloy10.1016/j.ijfatigue.2007.01.049 ↗
17. A stress–strain function for the fatigue of metals
18. Cyclic deformation and fatigue in TiAl intermetallic compound under plastic strain control10.1016/j.ijfatigue.2009.10.009 ↗
19. Impact of microstructure, temperature and strain ratio on energy based low-cycle fatigue life prediction models for TiAl alloys10.1016/j.ijfatigue.2009.11.008 ↗
20. The effect of the applied strain range on fatigue cracking in lamellar TiAl alloy10.1016/S0925-8388(01)01812-6 ↗