Fatigue crack propagation near the interface between Al and steel in dissimilar Al/steel friction stir welds
Source abstract
Abstract
Abstract Fatigue crack propagation (FCP) tests were conducted using the dissimilar joints between Al alloy and steel fabricated by friction stir welding. CT specimens were sampled from the friction-stir-welded plates so that the initial notch was consistent with the interface. Crack closure during FCP was measured by a back-face strain gauge. The FCP rates of the welds were slower than those of Al parent metal. Crack opening points of the welds were higher than that of the parent metal. FCP rates were nearly the same among all the samples, when FCP rates were estimated by the effective stress intensity factor range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Fatigue and fracture mechanics · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Feasibility study of friction stir welding of 6061–T6 aluminium alloy with AISI 1018 steel10.1243/0954405042323612 ↗
2. Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding10.1016/j.ijmachtools.2004.03.011 ↗
3. Racineux. Friction stir diffusion bonding of dissimilar metals10.1179/136217110X12720264008475 ↗
4. Friction stir weld assisted diffusion bonding of 5754 aluminum alloy to coated high strength steels10.1016/j.matdes.2013.10.013 ↗
5. Investigation of microstructure and mechanical properties of friction stir welded AA6016-T4 and DC04 alloy joints10.1007/s00170-017-1022-6 ↗
6. Relationship between intermetallic compound layer thickness with deviation and interfacial strength for dissimilar joints of aluminum alloy and stainless steel10.1016/j.msea.2018.08.065 ↗
7. Study on low axial load friction stir lap joining of 6061–T6 and zinc-coated steel10.1007/s11661-019-05369-9 ↗
8. Microstructures in friction-stir welded dissimilar magnesium alloys and magnesium alloys to 6061–T6 aluminum alloy10.1016/j.matchar.2004.03.005 ↗
9. Microstructure of friction stir welding of aluminium alloy to magnesium alloy10.1016/j.scriptamat.2009.02.020 ↗
10. Uematsu Y, Kakiuchi T, Tozaki, Y, Asaji T. Fatigue behavior in A6061/AZ31 dissimilar friction stir spot weld made by a scroll grooved tool. Trans. the Japan Soc. Mech. Eng. 2014;80:SMM0352. (in Japanese).10.1299/transjsme.2014smm0352 ↗
11. Fatigue and fracture of friction stir linear welded dissimilar aluminum-to-magnesium alloys10.1016/j.ijfatigue.2015.09.033 ↗
12. Conventional and cooling assisted friction stir welding of AA6061 and AZ31B alloys10.1016/j.msea.2019.04.120 ↗
13. Characterisation of interface of steel/magnesium FSW10.1179/1362171810Y.0000000012 ↗
14. Comparative study of fatigue behavior in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds fabricated by scroll grooved tool without probe10.1179/1362171812Y.0000000014 ↗
15. Dissimilar FSW of immiscible materials: Steel/magnesium10.1016/j.msea.2014.11.060 ↗
16. Fatigue behavior of dissimilar friction stir welds between wrought and cast aluminum alloys10.1080/13621718.2017.1361669 ↗
17. Process parameters study on FSW joint of dissimilar metals for aluminum-steel10.1007/s10853-009-3336-8 ↗
18. Fatigue behavior of dissimilar A6061/rolled steel (SS400) friction stir welds10.2207/qjjws.31.112 ↗
19. Influence of tool shape on friction stir welded joint of aluminum and steel with circular weld line10.1016/j.proeng.2014.10.291 ↗
20. Residual stress measurement of Al/steel dissimilar friction stir weld10.1080/13621718.2019.1588521 ↗
21. Fatigue properties of butt welded aluminum alloy and carbon steel joints by friction stirring
22. Fatigue behaviour of dissimilar friction stir spot welds between A6061–T6 and low carbon steel sheets welded by a scroll grooved tool without probe10.1111/j.1460-2695.2010.01549.x ↗
23. Fatigue behavior of dissimilar Al alloy/galvanized steel friction stir spot welds fabricated by a scroll grooved tool without probe10.1179/1362171815Y.0000000053 ↗
24. Local fatigue crack propagation behavior of a two-pass friction stir welded aluminum alloy. Bulletin of the
25. Fatigue crack propagation behavior in friction stir welding of AA6063-T5: roles of residual stress and microstructure10.1016/j.ijfatigue.2012.02.003 ↗
26. Residual stress effects on near-threshold fatigue crack growth in friction stir welds in aerospace alloys10.1016/j.ijfatigue.2003.08.002 ↗
27. Size effects on residual stress and fatigue crack growth in friction stir welded 2195–T8 aluminium – Part I: Experiments10.1016/j.ijfatigue.2011.05.006 ↗
28. Fracture toughness and fatigue crack growth behavior of A3003/SUS304 lap friction stir welded joints10.2207/qjjws.33.20 ↗
29. Evaluation of fatigue crack propagation in dissimilar Al/steel friction stir welds10.1016/j.prostr.2016.06.129 ↗
30. Boundary element analysis of stress intensity factors for an interface crack in dissimilar materials10.1299/kikaia.55.340 ↗
31. Yuuki R, Xu JQ. Mechanics of Interface Crack. Seisan-Kenkyu, Monthly Journal of the Institute of Industrial Science, University of Tokyo 1990;42:508–514. (in Japanese).
32. Hertzberg · 1983