The effect of cyclic loading on the creep fatigue life and creep strength of a DS superalloy: Damage mechanism and life modeling
Source abstract
Abstract
Abstract In this paper, the creep-fatigue behavior of directionally solidified superalloy DZ125 has been investigated by stress-controlled experiments at high temperatures with different dwell times. The endurance life(i.e Cumulated dwell time) has shown consistent changing trend with different load conditions. Crack growth form and creep-fatigue interaction are analyzed on the basis of microscope observation results. A new continuum damage mechanics(CDM) model is proposed and the damage behavior of DZ125 under different dwell times is systematically analyzed by this new model. Secondly, a life prediction model of high precision with fully coverage of dwell time and hold stress is proposed based on material’s endurance strength decline and classical Larson-Miller life prediction method. Finally, the ultimate value of endurance strength decline of the superalloy affected by cyclic loads is determined for engineering application purpose.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Effect of notches on creep–fatigue behavior of a P/M nickel-based superalloy10.1016/j.ijfatigue.2016.01.024 ↗
2. Cyclic hardening/softening behavior of 316L stainless steel at elevated temperature including strain-rate and strain-range dependence: Experimental and damage-coupled constitutive modeling10.1016/j.ijplas.2018.11.001 ↗
3. A physically based model for correlating the microstructural degradation and residual creep lifetime of a polycrystalline Ni-based superalloy10.1016/j.jallcom.2018.11.417 ↗
4. Effect of MCrAlY coating on the low-cycle fatigue behavior of a directionally solidified nickel-base superalloy at different temperatures10.1016/j.ijfatigue.2015.02.018 ↗
5. Influence of MCrAlY coating on low-cycle fatigue behavior of a directionally solidified nickel-based superalloy in hot corrosive environment10.1016/j.msea.2016.09.064 ↗
6. High temperature fatigue and creep-fatigue behaviors in a Ni-based superalloy: damage mechanisms and life assessment10.1016/j.ijfatigue.2018.05.008 ↗
7. Microstructure heterogeneity and creep damage of DZ125 nickel-based superalloy10.1016/j.pnsc.2014.05.004 ↗
8. Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition10.1016/j.matchar.2019.02.021 ↗
9. Influence of coarsened and rafted microstructures on the thermomechanical fatigue of a Ni-base superalloy10.1016/j.ijfatigue.2015.08.001 ↗
10. A closure model for predicting crack growth under creep-fatigue loading10.1016/j.ijfatigue.2019.03.029 ↗
11. In-phase thermomechanical fatigue lifetime prediction of nickel-based single crystal superalloys from smooth specimens to notched specimens based on coupling damage on critical plane10.1016/j.ijfatigue.2019.05.016 ↗
12. Experimental investigation of fatigue crack growth behavior of GH2036 under combined high and low cycle fatigue10.1016/j.ijfatigue.2015.10.027 ↗
13. Thermomechanical fatigue experiment and failure analysis on a nickel-based superalloy turbine blade10.1016/j.engfailanal.2019.04.023 ↗
14. Effect of high-temperature hot corrosion on the low cycle fatigue behavior of a directionally solidified nickel-base superalloy10.1016/j.ijfatigue.2014.08.011 ↗
15. Damage mechanism in austenitic steel during high temperature cyclic loading with dwells10.1016/j.ijfatigue.2018.02.017 ↗
16. Effect of local recrystallized grains on the low cycle fatigue behavior of a nickel-based single crystal superalloy10.3390/cryst9060312 ↗
17. Creep-fatigue and cyclically enhanced creep mechanisms in aluminium based metal matrix composites10.1016/j.euromechsol.2018.10.015 ↗
18. Characterization of anisotropic behaviour of ZK60 extrusion under stress-control condition and notes on fatigue modeling10.1016/j.ijfatigue.2019.05.030 ↗
19. Influence of hold time and stress ratio on cyclic creep properties under controlled tension loading cycles of grade 91 steel10.1016/j.net.2016.11.007 ↗
20. Liu · 2011
21. Zhou · 2007
22. On the creep fatigue and creep rupture behaviours of 9–12% Cr steam turbine rotor10.1016/j.euromechsol.2019.04.017 ↗
23. Creep fatigue behaviour of directionally solidified nickel base superalloy
24. Creep-fatigue design rules for cyclic softening steels10.1016/j.ijfatigue.2018.08.008 ↗
25. Creep-fatigue behavior of turbine disc of superalloy GH720Li at 650°C and probabilistic creep-fatigue modeling10.1016/j.msea.2016.05.117 ↗
26. E.B.o.C.A.M. Handbook · 2013
27. Z.J. S, Strength of Materials, Press of Harbin of Institute of Technology, Harbin; 2004.
28. Creep crack growth by grain boundary cavitation under monotonic and cyclic loading10.1016/j.jmps.2017.07.018 ↗
29. On the kinetics of rafting in CMSX-4 superalloy single crystals10.1016/S1359-6454(99)00093-2 ↗
30. Damage propagation mechanism in low-cycle creep fatigue of Cu–Cr–Zr alloy10.1016/j.ijfatigue.2016.02.025 ↗
31. Performance, parametric study of cyclic plasticity behavior in a directionally solidified superalloy with partial recrystallization by crystal plasticity finite element simulation
32. Crack initiation and propagation mechanisms during thermal fatigue in directionally solidified superalloy DZ12510.1016/j.ijfatigue.2018.09.001 ↗
33. Oxidation-assisted creep damage in a wrought nickel-based superalloy: experiments and modelling10.1016/j.msea.2009.10.054 ↗
34. Wei-xin · 1996
35. Ultra-high Cycle Fatigue Behavior of Directionally Solidified Superalloy DZ125 under Different Loading Conditions
36. Rabotnov YN, Leckie FA, Prager W. Creep Problems in Structural Members. 1970;37:249.10.1115/1.3408479 ↗
37. Lemaitre · 1996
38. Microstructure-sensitive creep models for nickel-base superalloy single crystals10.1016/j.msea.2013.04.072 ↗
39. Creep-Fatigue behavior of Ni-Based single crystal superalloys CMSX-3
40. Study on cyclic creep fracture life of deformed superalloy notched specimens
41. Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part III: Lifetime prediction10.1016/j.ijfatigue.2008.02.006 ↗
42. J.G. Chao Y, Research Y H I O M, et al., ACTA METALLRUGICA SINICA, Cyclic creep behavior of directionally solidified nickel-based superalloy DZ17g, (1999).
43. Fracture analysis of static creep and cyclic creep of notched wrought superalloy specimens
44. Coffin · 1976 · 349
45. Coffin Jr. LF. Fatigue at high temperature-prediction and interpretation 1974; 188: 109–127.10.1243/PIME_PROC_1974_188_014_02 ↗
46. Halford G, Hirschberg M, Manson S, Creep fatigue analysis by strain-range partitioning; 1971.
47. H.J. R, High Temperature Fatigue of Steel, Science Press, Beijing; 1988.
48. Creep–fatigue endurance of 304 stainless steels10.1016/j.tafmec.2014.05.001 ↗
49. Review of creep–fatigue endurance and life prediction of 316 stainless steels10.1016/j.ijpvp.2014.12.002 ↗
50. A systematical weight function modified critical distance method to estimate the creep-fatigue life of geometrically different structures10.1016/j.ijfatigue.2019.04.032 ↗
51. A finite cyclic elasto-plastic constitutive model to improve the description of cyclic stress-strain hysteresis loops10.1016/j.ijplas.2017.04.009 ↗
52. Design for creep: a critical examination of some methods10.1016/j.engfailanal.2012.08.022 ↗
53. A generalized hysteresis energy method for fatigue and creep-fatigue life prediction of 316L(N)10.1016/j.msea.2014.11.097 ↗
54. Crystal viscoplasticity model for the creep-fatigue interactions in single-crystal Ni-base superalloy CMSX-810.1016/j.ijplas.2017.08.008 ↗