A shakedown analysis of high cycle fatigue of shape memory alloys
Source abstract
Abstract
Abstract Shape memory alloys (SMAs) are exploited in several innovative applications, experiencing up to millions of cycles, and thus requiring a fully understanding of material fatigue and fracture resistance. However, experimental and methodological descriptions of SMA cyclic response are still incomplete. Accordingly, the present paper aims to investigate the cyclic response of SMAs under macroscopic elastic shakedown and to propose a criterion for the high cycle fatigue of SMAs. A multiaxial criterion based on a multiscale analysis of the phase transformation between austenite and martensite and using the rigorous framework of standard generalized materials is proposed. The criterion is an extension of the Dang Van high cycle fatigue criterion to SMAs. The criterion is applied to uniaxial experimental data taken from the literature. It distinguishes run out from failure tests in the infinite lifetime regime. The analysis permits a novel insight into the development of a general multiaxial failure criterion for SMA materials and also suggests further experimental investigations to completely understand the fatigue behavior of SMAs under elastic shakedown.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. Seismic response of steel braced frames with shape memory alloy braces10.1016/j.jcsr.2010.06.006 ↗
2. SMA numerical modeling versus experimental results: parameter identification and model prediction capabilities10.1007/s11665-009-9409-7 ↗
3. A three-dimensional model describing stress-temperature induced solid phase transformations: solution algorithm and boundary value problems10.1002/nme.1086 ↗
4. A macroscopic 1D model for shape memory alloys including asymmetric behaviors and transformation-dependent elastic properties10.1016/j.cma.2009.01.019 ↗
5. Optimization based simulation of self-expanding nitinol stent10.1016/j.matdes.2013.03.012 ↗
6. Impact of thermomechanical texture on the superelastic response of nitinol implants10.1016/j.jmbbm.2011.05.013 ↗
7. Efficient algorithms for calculation of shear stress amplitude and amplitude of the second invariant of the stress deviator in fatigue criteria applications10.1016/S0142-1123(01)00181-5 ↗
8. A multiscale approach of fatigue and shakedown for notched structures10.1016/j.tafmec.2007.05.002 ↗
9. A model problem concerning recoverable strains of shape-memory polycrystals
10. Fast time-scale average for a mesoscopic high cycle fatigue criterion10.1016/j.ijfatigue.2012.06.015 ↗
11. Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy10.1016/j.jmps.2004.01.001 ↗
12. Relations entre grandeurs microscopiques et macroscopiques
13. Critere de fatigue polycyclique pour des materiaux anisotropes: application aux monocristaux10.1016/j.crme.2003.11.005 ↗
14. Dissipative aspects in high cycle fatigue10.1016/j.mechmat.2009.01.018 ↗
15. Ultralow-fatigue shape memory alloy films10.1126/science.1261164 ↗
16. A unified approach for high and low cycle fatigue based on shakedown concepts10.1046/j.1460-2695.2003.00675.x ↗
17. Fracture in single crystal NiTi10.1016/j.jmps.2008.04.002 ↗
18. High-cycle metal fatigue in the context of mechanical design
19. On a new multiaxial fatigue limit criterion: theory and application
20. On some recent trends in modelling of contact fatigue and wear in rail
21. Identification of the scatter in high cycle fatigue from temperature measurements10.1016/j.crme.2004.06.002 ↗
22. Determination of an HCF criterion by thermal measurements under biaxial cyclic loading10.1016/j.ijfatigue.2006.06.009 ↗
23. Shakedown analysis of shape memory alloy structures10.1016/j.ijplas.2006.04.001 ↗
24. A computational approach for the fatigue design of threaded connections10.1016/j.ijfatigue.2010.11.006 ↗
25. Semianalytical solution for the stress distribution in notched tubes10.1016/j.ijfatigue.2010.10.009 ↗
26. Frémond · 2002
27. Effect of microstructure on the fatigue of hot-rolled and cold-drawn NiTi shape memory alloys10.1016/j.msea.2007.11.033 ↗
28. Fatigue crack initiation and propagation of a TiNi shape memory alloy10.1016/j.scriptamat.2010.02.001 ↗
29. Micromechanical study of the loading path effect in high cycle fatigue10.1016/j.ijfatigue.2013.09.014 ↗
30. High compressive pre-strains reduce the bending fatigue life of nitinol wire
31. Sur les materiaux standards generalises
32. Hartl D, Chemisky Y, Meraghni F. Three-dimensional constitutive model considering transformation-induced damage and resulting fatigue failure in shape memory alloys. In: Proc SPIE 9058, behavior and mechanics of multifunctional materials and composites; 2014. p. 905805.10.1117/12.2046668 ↗
33. Coronary stent fracture10.1503/cmaj.101078 ↗
34. Numerical exploration of the Dang Van high cycle fatigue criterion: application to gradient effects10.2140/jomms.2009.4.293 ↗
35. Taming the temperamental metal transformation10.1126/science.aab3273 ↗
36. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
37. Whole-life transformation ratchetting and fatigue of super-elastic NiTi alloy under uniaxial stress-controlled cyclic loading10.1016/j.msea.2011.12.071 ↗
38. Long-term behaviour of binary Ti49.7Ni (at.%) SMA actuators – the fatigue lives and evolution of strains on thermal cycling10.1088/0964-1726/19/11/115019 ↗
39. Martensite strain memory in the shape memory alloy Nickel-Titanium under mechanical cycling10.1007/s11340-010-9435-2 ↗
40. General problems for elastic solids
41. High-resolution in-situ characterization of the surface evolution of a polycrystalline NiTi SMA-alloy under pseudoelastic deformation10.1016/j.matchar.2010.12.008 ↗
42. Lagoudas · 2008
43. Constitutive model for the numerical analysis of phase transformation in polycrystalline shape memory alloys10.1016/j.ijplas.2011.10.009 ↗
44. A general macroscopic description of the thermomechanical behavior of shape memory alloys10.1016/0022-5096(96)00013-0 ↗
45. Analysis of elastic and plastic strains of a FCC crystal10.1016/0022-5096(57)90058-3 ↗
46. Fatigue limit evaluation of metals using an infrared thermographic technique10.1016/S0167-6636(97)00047-1 ↗
47. Fatigue of nitinol:the state-of-the-art and ongoing challenges10.1016/j.jmbbm.2015.06.010 ↗
48. Fatigue of pseudoelastic NiTi within the stress-induced transformation regime: a modified Coffin–Manson approach10.1088/0964-1726/21/11/112001 ↗
49. Applications of shape memory alloys in structural engineering
50. Design and application of shape memory actuators10.1140/epjst/e2008-00679-9 ↗
51. Coupling between measured kinematic fields and multicrystal SMA finite element calculations10.1016/j.mechmat.2009.09.003 ↗
52. A critical plane approach for life prediction of high cycle fatigue under multiaxial variable amplitude loading10.1016/S0142-1123(99)00118-8 ↗
53. A critical plane approach for life prediction of high cycle fatigue under multiaxial variable amplitude loading10.1016/S0142-1123(99)00118-8 ↗
54. Morin C, Moumni Z, Zaki W. Cyclic behavior and fatigue design of shape memory alloy devices. In: Proceedings of plasticity; 2010.
55. Fatigue analysis of shape memory alloys: energy approach10.1088/0964-1726/14/5/017 ↗
56. Cyclic behaviour and energy approach of the fatigue of shape memory alloys10.2140/jomms.2009.4.395 ↗
57. Theoretical and numerical modeling of solid–solid phase change: application to the description of the thermomechanical behavior of shape memory alloys10.1016/j.ijplas.2007.07.007 ↗
58. On shakedown analysis in hardening plasticity10.1016/S0022-5096(02)00058-3 ↗
59. Plastic deformation governed by the stress-induced martensitic transformation in polycrystals10.2320/matertrans1960.29.267 ↗
60. Orowan E. Theory of the fatigue of metals. In: Proc roy soc, vol. 171; 1939. p. 79–106.10.1098/rspa.1939.0055 ↗
61. Papadopoulos I. Fatigue polycyclique des métaux: une nouvelle approche. PhD thesis, Ecole des Ponts et Chaussées, France; 1987.
62. Long life fatigue under multiaxial loading10.1016/S0142-1123(01)00059-7 ↗
63. A pattern-based method for bounding the effective response of a nonlinear composite10.1016/j.jmps.2004.11.001 ↗
64. A non-convex lower bound on the effective energy of polycrystalline shape memory alloys10.1016/j.jmps.2009.02.003 ↗
65. A non-convex lower bound on the effective energy of polycrystalline shape memory alloys10.1016/j.jmps.2009.02.003 ↗
66. Shakedown theorems and asymptotic behaviour of solids in non-smooth mechanics10.1016/j.euromechsol.2010.03.011 ↗
67. Peigney M. Shakedown theorems and asymptotic behaviour of solids in non-smooth mechanics. In: Proc of EUROMECH 2013 – colloquium 548 – direct and variational methods for nonsmooth problems in mechanics. Amboise, France; 2013.
68. On shakedown of shape memory alloys structures10.1007/s12356-014-0035-1 ↗
69. Nitinol fatigue: a review of microstructures and mechanisms10.1007/s11665-011-9864-9 ↗
70. Rotary-bending fatigue characteristics of medical-grade Nitinol wire10.1016/j.jmbbm.2013.06.003 ↗
71. Pelton A, Gong X, Duerig T. Fatigue testing of diamond-shaped specimens. In: Proc materials and the processes for medical devices conf on medical device materials; 2003. p. 199–204.
72. Fatigue and durability of Nitinol stents10.1016/j.jmbbm.2007.08.001 ↗
73. Biomedical applications of shape memory alloys10.1155/2011/501483 ↗
74. On shakedown theory for elastic–plastic materials and extensions10.1016/j.jmps.2007.11.005 ↗
75. Probabilistic multiscale models and measurements of self-heating under multiaxial high cycle fatigue10.1016/j.jmps.2010.01.003 ↗
76. Cyclic torsional loading of pseudoelastic NiTi shape memory alloys: damping and fatigue failure10.1016/j.msea.2005.10.037 ↗
77. Bending rotation HCF testing of pseudoelastic Ni–Ti shape memory alloys10.1002/mawe.201300118 ↗
78. Mechanical fatigue and fracture of Nitinol10.1179/1743280411Y.0000000009 ↗
79. An equivalent strain/Coffin–Manson approach to multiaxial fatigue and life prediction in superelastic Nitinol medical devices10.1016/j.biomaterials.2011.03.057 ↗
80. Schijve · 2009
81. Thermomechanical model for NiTi-based shape memory alloys including R-phase and material anisotropy under multi-axial loadings10.1016/j.ijplas.2012.06.008 ↗
82. Souza A, Mamiya E, Zouain N. A new three-dimensional constitutive model for shape memory alloys. In: Idelsohn S, Onate E, Dvorkin E, editors. Computational mechanics, new trends and applications (CIMNE). Barcelona, Spain; 1998a.
83. Three-dimensional model for solids undergoing stress-induced phase transformations10.1016/S0997-7538(98)80005-3 ↗
84. Long-time stability of Ni–Ti-shape memory alloys for automotive safety systems10.1007/s11665-011-9848-9 ↗
85. A robust model of pseudoelasticity in shape memory alloys10.1002/nme.4405 ↗
86. Mean stress effects on fatigue of NiTi
87. Mean strain effects on the fatigue properties of superelastic NiTi10.1007/s11661-001-0164-0 ↗
88. Plastic strain in metals
89. Tensile and fatigue behavior of superelastic shape memory rods10.1016/j.matdes.2015.07.024 ↗
90. Solving semidefinite-quadratic-linear programs using SDPT310.1007/s10107-002-0347-5 ↗
91. US Food, Drug Administration. Non-clinical engineering tests and recommended labeling for intravascular stents and associated delivery systems: guidance for industry and FDA staff. US Department of Health and Human Services; Food and Drug Administration, Centre for Devices and Radiological, Health; April 18th 2010.
92. A modeling approach to predict fretting fatigue on highly loaded blade roots10.1115/1.3205026 ↗
93. A modeling approach to predict fretting fatigue on highly loaded blade roots10.1115/1.3205026 ↗
94. Phase transformation behavior of pseudoelastic NiTi shape memory alloys under large strain10.1016/j.jallcom.2007.09.029 ↗
95. Modeling phase fraction shakedown during thermomechanical cycling of shape memory materials10.1016/S0921-5093(99)00380-9 ↗
96. Effect of deformation frequency on temperature and stress oscillations in cyclic phase transition of NiTi shape memory alloy10.1016/j.jmps.2014.01.013 ↗
97. A 3D model of the cyclic thermomechanical behavior of shape memory alloys10.1016/j.jmps.2007.03.011 ↗