A comparative study of laser metal deposited and forged Ti-6Al-4V alloy: Uniaxial mechanical response and vibration fatigue properties
Source abstract
Abstract
Abstract This paper conducts a comparative study on mechanical properties of LMD and forged Ti-6Al-4V, focusing on uniaxial compression, tension and shear response with different strain rates, and vibration fatigue behaviors with 45–50 Hz in frequency. The micro-observation on initial microstructures and fractures explains the mechanism of lower uniaxial strength, shorter fatigue life, and larger dispersion in fatigue life and fracture position of LMD sample compared with the forged counterpart. Initial void defects within LMD sample tend to be stress-concentration zone, further initiating fatigue cracks. The columnar β grains leads to anisotropy of fatigue life and crack propagation for LMD sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: experiments and modeling over a wide range of strain-rates and temperatures10.1016/j.ijplas.2006.10.007 ↗
2. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
3. Influence of process parameters and heat treatments on the microstructures and dynamic mechanical behaviors of Inconel 718 superalloy manufactured by laser metal deposition10.1016/j.msea.2018.02.014 ↗
4. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
5. Additive manufacturing methods and modeling approaches: a critical review10.1007/s00170-015-7576-2 ↗
6. Thermomechanical behavior of laser metal deposited Inconel 718 superalloy over a wide range of temperature and strain rate: testing and constitutive modeling10.1016/j.mechmat.2019.04.024 ↗
7. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
8. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
9. Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts: tailored microstructures and enhanced performance10.1016/j.msea.2015.03.043 ↗
10. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
11. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium10.1016/j.actamat.2012.04.006 ↗
12. Inclusion evolution in additive manufactured 316L stainless steel by laser metal deposition process10.1016/j.matdes.2018.06.001 ↗
13. Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel10.1016/j.msea.2015.07.056 ↗
14. Porosity measurements and analysis for metal additive manufacturing process control10.6028/jres.119.019 ↗
15. Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting10.1007/s11665-013-0658-0 ↗
16. Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V10.1016/j.msea.2015.12.026 ↗
17. Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting10.1016/j.jmatprotec.2015.01.025 ↗
18. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting10.1016/j.matdes.2016.05.070 ↗
19. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes
20. Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting10.1016/j.matdes.2015.07.147 ↗
21. Thermomechanical response of 3D laser-deposited Ti-6Al-4V alloy over a wide range of strain rates and temperatures10.1016/j.msea.2015.08.043 ↗
22. Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V10.1016/j.matchar.2018.03.032 ↗
23. Influence of heat-treatment on the dynamic behavior of 3D laser-deposited Ti–6Al–4V alloy10.1016/j.msea.2016.09.036 ↗
24. The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti-6Al-4V10.1016/j.ijimpeng.2009.08.002 ↗
25. Microstructure and mechanical properties of laser solid formed Ti-6Al-4V alloy under dynamic shear loading10.1007/s11665-017-2748-x ↗
26. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
27. Fatigue behavior of porous Ti-6Al-4V made by laser-engineered net shaping
28. Microstructure evolution, tensile properties, and fatigue damage mechanisms in Ti-6Al-4V alloys fabricated by two additive manufacturing techniques10.1016/j.proeng.2015.08.007 ↗
29. Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V10.1179/1362171815Y.0000000050 ↗
30. Fatigue behavior and modeling of additively manufactured Ti-6Al-4V including interlayer time interval effects10.1007/s11837-017-2625-y ↗
31. Torsional fatigue behavior of wrought and additive manufactured Ti-6Al-4V by powder bed fusion including surface finish effect10.1016/j.ijfatigue.2017.03.002 ↗
32. Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.05.018 ↗
33. Experimental study of effect of post processing on fracture toughness and fatigue crack growth performance of selective laser melting Ti-6Al-4V
34. Vibration fatigue using modal decomposition10.1016/j.ymssp.2017.03.052 ↗
35. Synthesis of Sine-on-Random vibration profiles for accelerated life tests based on fatigue damage spectrum equivalence10.1016/j.ymssp.2017.10.022 ↗
36. Characterization of bending vibration fatigue of SLM fabricated Ti-6Al-4V10.1016/j.ijfatigue.2017.02.005 ↗
37. Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): process, microstructure, and mechanical properties10.1016/j.jallcom.2019.04.255 ↗
38. Deposition of Ti-6Al-4V using a high power diode laser and wire, Part I: Investigation on the process characteristics10.1016/j.surfcoat.2008.02.008 ↗
39. Fatigue crack growth behavior and microstructural mechanisms in Ti-6Al-4V manufactured by laser engineered net shaping10.1016/j.ijfatigue.2016.08.009 ↗
40. Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling10.1007/s11661-004-0095-7 ↗
41. ASTM E1695-95(2013). Standard test method for measurement of computed tomography (CT) system performance. ASTM International, West Conshohocken, PA
42. ASTM E1695-95(2013). Standard test method for measurement of computed tomography
43. (CT) system performance. ASTM International, West Conshohocken, PA; 2013. http://dx.doi.org/10.1520/E1695-95R13.10.1520/E1695-95R13 ↗
44. Development of a novel vibration-based fatigue testing methodology10.1016/j.ijfatigue.2003.10.012 ↗
45. Mechanical fatigue measurement via a vibrating cantilever beam for self-supported thin solid films10.1007/s11340-006-7556-4 ↗
46. Development of a closed-loop high-cycle resonant fatigue testing system10.1007/s11340-011-9486-z ↗
47. Deformation induced anisotropic responses of Ti-6Al-4V alloy Part II: A strain rate and temperature dependent anisotropic yield criterion10.1016/j.ijplas.2012.03.015 ↗
48. Anisotropy and tension-compression asymmetry modeling of the room temperature plastic response of Ti-6Al-4V10.1016/j.ijplas.2014.10.003 ↗
49. Mechanisms of anisotropy of mechanical properties of α-titanium in tension conditions10.1016/j.msea.2013.12.061 ↗
50. Fatigue behaviour of additively manufactured Ti-6Al-4v10.1016/j.proeng.2015.12.632 ↗