Faceted crack induced failure behavior and micro-crack growth based strength evaluation of titanium alloys under very high cycle fatigue
Source abstract
Abstract
Abstract Very high cycle fatigue properties of titanium alloys under symmetrical and asymmetrical loads were experimentally examined to clarify the failure behavior. An inhomogeneous microstructure zone (IMZ) containing facets is observable. By focused ion beam testing, the interior micro-crack extends along the maximum shear stress plane and the facet plane is about 45°. By the modeling of growth rate and the definition of controlling line, a strength evaluation approach with the failure behavior was well proposed. This reflects that the micro-crack growth rate in IMZ stage is below one Burger’s vector.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Inclusion initiated fracture under cycle torsion very high cycle fatigue at different load ratios10.1016/j.ijfatigue.2019.01.015 ↗
2. Giga-fatigue life prediction of FV520B-I with surface roughness10.1016/j.matdes.2015.10.104 ↗
3. Improved very high cycle bending fatigue behavior of Ni microbeams with Au coatings10.1016/j.actamat.2018.09.037 ↗
4. Microscopic and nanoscopic observations of metalluigical structures around inclusions at interior crack initiation site for a bearing steel in very high-cycle fatigue10.1111/ffe.12344 ↗
5. Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy10.1016/j.ijfatigue.2019.02.040 ↗
6. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels10.1016/j.ijfatigue.2013.02.023 ↗
7. On the crystallographic, stage I-like, character of fine granular area formation in internal fish-eye fatigue cracks10.1016/j.ijfatigue.2017.09.013 ↗
8. Fatigue properties of laser-brazed joints of dual phase and transformation induced plasticity steel with a copper-aluminium consumable10.1016/j.matdes.2010.03.018 ↗
9. The effects of microstructure and porosity on the competing fatigue failure mechanisms in powder metallurgy Ti-6Al-4V10.1016/j.ijfatigue.2018.07.006 ↗
10. Fatigue life and mechanistic modeling of interior micro-defect cracking in high cycle and very high cycle regimes10.1016/j.actamat.2018.07.036 ↗
11. Dominant factors for very-high-cycle fatigue of high-strength steels and a new design method for components10.1111/ffe.12331 ↗
12. Effect of microstructure on ultra-high cycle fatigue behavior of Ti-6AL-4V10.1016/j.msea.2007.04.062 ↗
13. Mechanical study of crystalline orientation distribution in Ti-6Al-4V: An assessment of micro-texture induced load partitioning10.1016/j.matdes.2017.10.011 ↗
14. Influence of microstructure [alpha + beta and beta] on very high cycle fatigue behavior of Ti-6Al-4V alloy10.1016/j.ijfatigue.2016.10.002 ↗
15. Effect of stress ratio on VHCF behavior for a compressor blade titanium alloy10.1016/j.ijfatigue.2016.05.004 ↗
16. Effects of stress ratio on high-cycle and very-high-cycle fatigue behavior of a Ti-6Al-4V alloy10.1016/j.msea.2014.09.115 ↗
17. On the mechanism of very high cycle fatigue in Ti-6Al-4V10.1016/j.scriptamat.2008.08.012 ↗
18. Effects of vacuum environment on small fatigue crack propagation in Ti-6Al-4V10.1016/j.ijfatigue.2016.05.024 ↗
19. Effects of shot-peening and re-shot-peening on four-point bend fatigue behavior of Ti-6Al-4V10.1016/j.msea.2007.01.156 ↗
20. S-N property and fractograghy of high carbon chromium bearing steel over ultra wide life region under rotating bending10.1299/kikaia.67.1805 ↗
21. S-N curve characteristics and subsurface crack initiation behavior in ultra-long life fatigue of a high carbon-chromium bearing steel10.1046/j.1460-2695.2001.00459.x ↗
22. On the mechanism of fatigue failure in the superlong life regime (>107 cycles). Part I: influence of hydrogen trapped by inclusions10.1046/j.1460-2695.2000.00328.x ↗
23. Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high strength steels10.1016/j.scriptamat.2012.07.049 ↗
24. Microscopic and nanoscopic observations of metallurgical structures around inclusions at interior crack initiation site for a bearing steel in very high-cycle fatigue10.1111/ffe.12344 ↗
25. The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels10.1016/j.ijfatigue.2015.11.029 ↗
26. The effect of vacuum-like environment inside sub-surface fatigue crack on the formation of ODA fracture surface in high strength steel10.1016/j.proeng.2010.03.228 ↗
27. Subsurface fracture in high-cycle fatigue at cryogenic temperatures in Ti-5%Al-2.5%Sn extra low interstitial alloy10.2320/matertrans.44.1702 ↗
28. The role of microtexture on the faceted fracture morphology in Ti–6Al–4V subjected to high cycle fatigue10.1016/j.actamat.2010.03.036 ↗
29. Investigation of fatigue crack initiation in Ti–6Al–4V during tensile–tensile fatigue10.1361/105994902770344312 ↗
30. Deformation heterogeneities and their role in life-limiting fatigue failures in a two-phase titanium alloy10.1016/j.actamat.2014.08.034 ↗
31. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
32. Fatigue crack propagation behavior derived from S-N data in very high cycle regime10.1046/j.1460-2695.2002.00547.x ↗
33. Ultra-long cycle fatigue of high-strength carbon steels, Part II: Estimation of fatigue limit for failure from internal inclusions10.1016/S0921-5093(03)00136-9 ↗
34. Prediction of the S-N curves of high-strength steels in the very high cycle fatigue regime10.1016/j.ijfatigue.2010.02.006 ↗
35. A cumulative damage model for fatigue life estimation of high-strength steels in high-cycle and very-high-cycle fatigue regimes10.1111/j.1460-2695.2011.01658.x ↗
36. A design approach for components in ultralong fatigue life with step loading10.1016/j.ijfatigue.2011.12.021 ↗
37. A rapid scatter prediction method for very high cycle fatigue10.1111/ffe.12021 ↗
38. Evaluation of crack growth behavior and probabilistic S-N characteristics of carburized Cr-Mn-Si steel with multiple failure modes10.1016/j.matdes.2014.08.047 ↗
39. Fatigue crack growth from small to large cracks on very high cycle fatigue with fish-eye failures10.1016/j.engfracmech.2007.05.015 ↗
40. Murakami · 2002