Effect of primary α phase on the fatigue crack path of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy
Source abstract
Abstract
Abstract The fatigue crack growth behaviour of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy was investigated. Deflective crack paths were observed in compact tension C(T) specimens under constant amplitude loading, which greatly extended their fatigue crack growth lives. Observations of metallographic microstructures and microscopic fracture morphology of C(T) specimens indicate that the deflection was caused by orderly distributed primary α phase (αp) laths in grains, especially in columnar grains. Further experiments with clamped single edge notch tension SENTC specimens showed that the deflective extent varies from global to local and even scarce with the gradual increase of the angle between the crack path and αp laths. SENTC results also indicate that the deflective effect of single acicular αp laths is stronger than that of crisscross one when comparing their range of influence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Study on the fatigue crack growth rates of Ti–5Al–5Mo–5V–1Cr-1Fe titanium alloy with basket-weave microstructure10.1016/j.msea.2014.10.022 ↗
2. Applications of titanium alloys on large transporter
3. Leyens · 2003
4. Microstructure and tensile properties of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy10.1016/j.msea.2013.08.032 ↗
5. Hot deformation of Ti-5Al-5Mo-5V-1Cr-1Fe near β, titanium alloys containing thin and thick lamellar α, phase10.1016/j.msea.2013.02.033 ↗
6. Microstructure and high cycle fatigue fracture surface of a Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy10.1016/j.msea.2013.03.047 ↗
7. Low cycle fatigue behavior of laser melting deposited TC18 titanium alloy10.1016/S1003-6326(13)62772-7 ↗
8. Identification of the optimal (α + β) forging process parameters of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si based on processing-maps10.1016/j.msea.2010.08.031 ↗
9. Progress and challenges of laser direct manufacturing of large titanium structural components (invited paper)10.3788/CJL20093612.3204 ↗
10. Progress on rapid solidification laser processing for advanced materials and components
11. Practical considerations and capabilities for laser assisted direct metal deposition10.1016/S0261-3069(99)00078-3 ↗
12. Microstructure and mechanical properties of laser melting deposited γ-tial intermetallic alloys10.1016/j.msea.2007.02.073 ↗
13. Characterization of microstructure and mechanical properties of laser melting deposited Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy10.1016/j.matdes.2013.11.044 ↗
14. Fatigue crack growth behaviour in laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy10.1016/j.msea.2017.03.001 ↗
15. Microstructural characterization of laser melting deposited Ti–5Al-5Mo–5V–1Cr–1Fe near β titanium alloy10.1016/j.jallcom.2013.03.243 ↗
16. Effect of micromorphology at the fatigue crack tip on the crack growth in electron beam welded Ti-4Al-4Mo-2Sn-0.5Si joint10.1016/j.matchar.2016.08.029 ↗
17. Effect of trace solute hydrogen on the fatigue life of electron beam welded Ti-6Al-4V alloy joints10.1016/j.msea.2016.12.102 ↗
18. Effect of α-phase morphology on low-cycle fatigue behavior of TC21 alloy10.1016/j.ijfatigue.2015.01.010 ↗
19. Effect of duplex aging on microstructure and mechanical behavior of beta titanium alloy Ti–15V–3Cr–3Al–3Sn under unidirectional and cyclic loading conditions10.1016/j.ijfatigue.2014.12.005 ↗
20. Studies on single and duplex aging of metastable beta titanium alloy Ti–15V–3Cr–3Al–3Sn10.1016/j.jallcom.2014.03.183 ↗
21. An investigation of the small fatigue crack growth behavior in Ti-6.5Al-2Zr-1Mo-1V alloy
22. Processing properties relationships of Ti-10V-2Fe-3Al10.1007/BF02647081 ↗
23. Microstructure and fracture toughness of the aged, β-Ti Alloy Ti-10V-2Fe-M10.1007/BF02628388 ↗
24. Microstructural influences on fatigue crack propagation in Ti-10V-2Fe-3Al10.1007/BF02814825 ↗
25. Effect of phase morphology on fatigue crack growth behavior of α-β, titanium alloy—a crack closure rationale10.1007/s11661-998-0177-z ↗
26. Subtransus triplex heat treatment of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy10.1016/j.msea.2013.10.002 ↗
27. Standard test method for measurement of fatigue crack growth rates; ASTM International; 2015.